Yokomo 1/10 YD-2E Plus RWD EP Competition Drift Car Chassis Kit #DP-YD2EPLS
This is Yokomo 1/10 YD-2E Plus RWD EP Competition Drift Car Chassis Kit.
More steering angle due to new Short Suspension Arm which has redesigned for prevent from interference with wheels, besides the location of steering stopper had also refined.
Longer stroke rear suspension arm is now available as standard bundled.By increasing the down-stroke amount, possible to pull out more rear roll aggressively and enhances traction and more stability.
Aluminum shock cylinders are the super low friction shock which is with Kashima coating to reduce the maximum frictional resistance with piston. The largest capacity in on-road car category, 11.2mm big bore cylinder has adopted and enable to absorb even small vibration due to run with a resin tire in a drift run from the road surface, then possible to get a maximum grip.
Height adjust system possible to change the car height by rotate the spring tensioner and suitable for various length on springs. Of course the setting that is most suitable for various road surfaces and run situation in total is provided by the change of shock oil and the piston to get a damping force with finely adjusted.
Innovative design of 4-gear transmissions for drift car.. Prevents the left/right imbalance due to the torque of the motor, by installing the motor in horizontal position and lead the neutral steering characteristics. Meanwhile, the rear traction will be increased on the throttle, so possible to escape when cornering stability and acceleration forces to withdraw. High dust-proof sealed gearbox is also attractive.
In addition, rear transmission gear is a lightweight type by using a plastic bevel gear and aluminum axle. Contributes to the improved throttle response and performance.
- Graphite Double Deck Chassis
- Aluminum Big Bore Shock
- 4 gear down Transmission
- Aluminum Motor mount Plate
- Long Spring
- High Angle Steering System for RWD
- Full Ball Bearing
- Rear Universal Shaft
- Standard and Shorty Battery
- AXON/Yokomo Precision Spur Gear 84T(48P)
- Length: 425mm
- Width: 198mm
- Wheelbase: 256mm
- Overdrive: 1:2.6
- Overall Weight: 1500g
- Yokomo 1/10 YD-2E Plus RWD EP Competition Drift Car Chassis Kit (1 pc)
- Radio & Receiver
- Tire & Wheel