This is Yokomo 1/10 Master Speed BD11 Factory Team Edition Graphite Chassis 4WD Touring Car EP.
The characteristic high-rigidity long suspension arm made of graphite is composed of a hybrid with resin and aluminum parts, reducing chassis roll and improving cornering speed. Durability is also confirmed by repeated tests, and it is possible to attack corners with confidence.
RTC (rear toe control) system is now a standard. While increasing the turning speed, it is possible to bring out the acceleration at the corner exit, which is an indispensable item for modern racing touring cars.
The front shock tower has undergone a dramatic reshape. By separating the left and right, it gives flexibility around the front and finishes with a mild operation feeling. We are also planning to release parts that increase rigidity assuming running on high-grip road surfaces.
The double joint universal on the front has also been redesigned to improve accuracy and durability. The stabilizer is also installed under the suspension arm to promote lowering the center of gravity.
The upper deck has a new shape according to the flex setting of the chassis. A stiffener can be used together on the front side, and the rigidity balance can be adjusted according to the road surface conditions.
The rear side of the upper deck is an original design of ATF (Active Top Deck Flex) that supports roller pins with an O-ring sandwiched between them. The twist of the chassis is pulled out to the maximum and the rear traction is enhanced. By changing the hardness of the O-ring or changing to a spacer, it is an important point that you can freely control the turning performance.
The front and rear shock absorbers also have a newly designed shaft guide, achieving even smoother operation.
Yokomo 1/10 Master Speed BD11 Factory Team Edition Graphite Chassis 4WD Touring Car EP (1 set)
2-Channel radio system
Electronic Speed Control
Compatible battery charger
Touring car tires
Polycarbonate paint for body