Xtra Speed Stainless Steel Axle Tubes For AXIAL WRAITH RR10 Bomber Yeti & Yeti Score #XS-AW230050
Strengthen up your rig equipped with a AR60 front axle with these stainless steel tubes! Also acts as a weight on the front axles which will increase grip generated and make crawling obstacles much easier, by installing this set you add approximately 45 grams to your front axle. Included are four 3*6mm Steel Button Head screws, you will need to use these to install the c hubs to the axle or you will risk damage to these tubes if you use the standard Axial screws.
*Photos for reference only. To install, take out all screws including the bottom grub screw and insert the tube by pushing it all the way. Install bearing onto drive shaft and push all the way in, after install the bearing will sit flush with the axle.
- For: Crawlers installed with a front AR60 Axle (Need to polish flange with rear shaft if use in RR10 & Yeti )
- Material: Steel
- Color: Silver
- Stainless Steel Axle Tubes (2 pcs)
- M3*6 Screws (4 pcs)