This is Tamiya 1/10 XB WR02G Tumbling Bull 2WD RTR Car Kit EP w/ 2.4GHz Radio. Take a trip back in time with this tractor-inspired R/C model assembly kit! The durable polycarbonate body is pre-painted in red and really captures the form of a 1930s-era European tractor, with a stretched bonnet, rear driver’s seat and big overarching fenders on the rear wheels. A finished driver figure is included in the kit to round off the look! The model runs on the rear wheel drive WR-02G chassis, with a sturdy monocoque frame and centrally-positioned motor plus 97mm (front) and 130mm diameter (rear) wheels. It also includes 4-wheel double wishbone suspension and sealed gearbox containing the differential. Slam on the throttle for wheels-in-the air driving action, try extravagant spin turns and enjoy driving this fun model!
The rear wheel drive WR-02G chassis was made for rough riding! Shielded by side frames and held tightly in place by the monocoque frame, the fully-sealed gearbox is well-protected from impact. Power is provided to the rear wheels by a centrally-positioned motor, and transmitted via the differential in the gearbox. The location of the battery pack is key: its longitudinally-placed position high in the rear ensures that when the model accelerates, the front naturally rises in a wheelie. At that point, the wheelie bar on the model’s rear stops the model from toppling over, and in doing so maintains a great wheelie! Steering servos are placed along the center of the chassis, and they combine with the 2-piece tie rod for precision steering. The suspension is of the tough 4-wheel double-wishbone variety.
In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only.
Resin Monocoque Frame
Rear Wheel 2WD
4-Wheel Double Wishbone Suspension
Front/Rear Friction Dampers
2-Piece Steering Tie Rod
Type 540 Motor
Electronic Speed Controller (Forward/Reverse Type)
Tread: 189mm (Front), 195mm (Rear)
Tire Width/Diameter: 57/97mm (Front), 58/130mm (Rear)
Gear Ratio: 18.3:1
Tamiya 1/10 XB WR02G Tumbling Bull 2WD RTR Car Kit EP w/ 2.4GHz Radio (1 set)