0 item(s) - USD 0.00

Sky RC SKYRC Program Box Six In One Functions

  • Brand: Sky RC
  • Model: SK-300046-01
USD 13.90

+ -
 Add to Wish List
In Stock Online!
Share with Friends

Photo(s) for reference only

Tags: Sky RC ESC Program Card

SKYRC Program Box Six In One Functions #SK-300046-01


SkyRC Program Box is a very sophisticated electronic device that controlled by high performance microprocessor. With compact size and easy operation.

Equipped with a 16Chr.*2 Lines LCD screen, the user interface is intuitive and easy to read. There are four keys in front panel which can be used to operate the box for all functions. The ports for motor sensor, USB, I/O connector and battery balance connector located on sides of the box which is clear and easy to use.

SkyRC Program Box offers six-in-one functions:

  • 1. ESC Setting
  • 2. PC Interface - Link ESC to PC
  • 3. Input PPM Signal Monitor
  • 4. Servo Tester
  • 5. Motor KV/RPM Tester
  • 6. LiPo Battery Monitor

ESC Setting- When you want to program the ESC precisely, we used to connect it to the PC. But sometimes, when you are running cars outside, it is not convenient to take PC, even laptop with you. At this time, you could use this device as Program Box to set all the parameters of ESC with maximum precision. Simply plug connect it to the ESC and set all parameters precisely in a short time as you wish.

PC Interface - Link ESC to PC- What's more, it can also work as SkyLINK, an USB adaptor which can be used to link the ESC with a PC, and you can update the firmware of the ESC or programming the ESC by SkyLINK software on PC.

PPM Signal Monitor- The PPM Signal Monitor function enables you to check the output voltage of the receiver and the radio's PPM signal width and frequency.

Servo Tester- No need to power on your transmitter, you could check the servo function easily. Connect the servo to the Program Box, get the information of input voltage, servo travel position and peak current. There are two modes: one is Swing Mode and the other is Manual Mode. Both modes are easy to operate.

Motor KV/RPM Tester- Wondering about your motor information? Connect your motor to this small device, input initial setting, move the throttle of the transmitter, then you can read the value of motor KV, RPM and input voltage on the screen.

LiPo Battery Monitor- It is also a very good device to check your LiPo battery situation at any place, any time. You could use it to check the total cell number, total voltage, each cell voltage, highest voltage and lowest voltage and the voltage difference between the highest voltage and lowest voltage.


  • For: Toro TS 120A ESC, Toro TS 150A ESC, Toro SC120A ESC, Toro TS50 Sensored ESC, Toro 1S120 ESC, ARES S-Pro2 BL motor for Short Course, TORO S-Pro4 BL motor for Short Course
  • Material: Plastic
  • Color: Black


  • Length: 85mm
  • Width: 48.5mm
  • Height: 11.8mm
  • Input Voltage (ESC Setting): 6-10VDC
  • Input Current (ESC Setting): 500mA
  • Idle Current (ESC Setting): <20mA
  • Operating Temperature: 0-40ºC
  • Storage Temperature: -10 — 60 ºC
  • Operating Humidity: 10 - 90%RH
  • Storage Humidity: 20 - 75%RH
  • Protection Class: IP20
  • Weight: 40g


  • SKYRC Program Box (1 pc)
  • Manual

Write a review

Please login or register to review

Customers that bought this also purchased...

Onisiki ONI8202
Aluminum 30mm Fan Booster
USD 12.90
Yeah Racing WPT-0121
Angle Type 4mm & 5mm Connector Plug
USD 4.90 USD 5.90
QuicRun 1080 Waterproof Brushed 80A ESC w/ Program Card For 1/10 1/8 Crawler
USD 38.90 USD 42.90
Susumu Workshop SS-0094
Graphite Narrow Battery Holder For Xpress Execute XQ10 XQ1 XQ1S
USD 6.50