0 item(s) - USD 0.00

Serpent 1/10 2WD Spyder SRX2 Gen3 Dirt Edition EP

USD 270.90 USD 363.93 (Save 25.6%)

+ -
 Add to Wish List
Last Few Pieces Left!

Photo(s) for reference only

Tags: Serpent Buggy


This is Serpent 1/10 2WD Spyder SRX2 Gen3 Dirt Edition EP. The Srx-2 Gen3 has been completely re-designed from the ground up. The customers, racers, and fan favorite trolls have shared their glories, opinions, and pains about the previous SRX-2’s. We were open minded and willing to meet every expectation to push the boundaries of our product and the 1/10 2wd Market. The new SRX-2 needed to be slimmer, stylish, tougher, easier to work on, and above all else Faster. With over 85% of the parts being new, all the while, still being able to use most all previous SRX-2 parts, this car is an absolute masterpiece of construction. You can build it to any configuration you wish, new and/or old. Here at Serpent’s Secret R&D office, we are un-rivalled in our interest to win, and feel, this car will take you to more checkered flags than any previous SRX-2model we have ever made, Guaranteed!

The foundation or in this case the chassis, is always the driving force in what sort of performance you can extract from your race car. With the interest of stiffening the front to back flex of the chassis, mostly in the center, we opted for a chassis with bent sides over our previous flat chassis. The life of the vehicle as well as how flat the chassis will stay over long periods of time is greatly enhanced.

We also took our original front end design, accepted its weakness, and then pushed the envelope even further by developing a multi bend chassis. This increases ground clearance, while decreases the loss of forward momentum. It also keeps you from playing Lawn Darts off any pesky jumps your local track can throw at you. Talking about pesky jumps, the wooden kind, those ones you find on so many carpet/turf tracks around the world. Finding the invisible speed is only for the master magicians. Thankfully, we have one in house working diligently day and night, on and off the race track, to enhance your racing experience.

With no other reason than to dominate every surface, we created an optional chassis with adjustable weight plates. The rear 14 gram weights will also fit the standard chassis; however this new optional chassis has an additional 4 choices when it comes to positioning weight. The Servo weight comes in an 8 gram aluminum weight as well as a 24 gram brass weight. The electronics weight comes in a 15 gram aluminum weight as well as a 45 gram brass weight. Whether you race dirt, carpet or astro turf you can full adjust your weight distribution and push your setup to the master level.

The side pods have been completely re-designed, in which it differs from the way we have done it in the past. The side pod itself is now separate from the front upper deck supports. This will allow us to make optional aluminum supports in the future, changing the flex characteristics of the front end. Also on the front supports we added the body mounts, and then coupled that with the rear mounts, no matter who mounts your body for you, it will always sit flat, front to rear and be properly positioned.

Whether you use the body clips or not, the pegs can be used to ensure that the body will always have proper alignment. Aside from the above mentioned design changes, the overall cars width has been reduced. This reduction in width enhances flight/articulation over jumps as well as reduces chassis roll.
Based on our customer feedback for a car that can do it all in any condition. One area that needed to be adjustable was the flex in the chassis. We came up with a super stylish, yet ridiculously functional way to achieve this goal. Besides who doesn’t love the stunning appearance of a great looking weave, of course we are talking about carbon fiber here. The small panels are 2mm thick and bolt directly onto the side pods. If you’re a fan of a super stiff chassis, we are certain this will satisfy your needs. These side panels will be sold separately and can be found in our “Optional” section on the web site.

In order for Serpent to progress, we had to accept the old front end geometry was more suited for a Rear Motor. So what did we do…. We tested until we were completely confident we had something that could propel us into the distant future. The end product was a new roll center. It also is a more adjustable and more durable front Caster block/Steering block assembly. You can now adjust the front roll center 3mm instead of the previous 1.5mm. We also increased the material around the bearings. We didn’t stop there though as we removed the outer 5x10x4 bearing and replaced it with a super long life 5x13x4. We added a vertical mounted ball stud for fine tuning the camber link/roll center. We changed the axle design so you can use a spacer between the axle and outer bearing. Other than giving more adjustability to the track width, you can now use any wheel on the market and be rest assured you can adhere to any rules and have highest performing scrub offset. Our new front is nothing shy of being a huge step forward. Progression is the name of the game, and that’s something we are no stranger’s too.

We know what it means to be able to work on your car, and to do it at break neck speeds. On our previous model, you had to completely remove the upper bulkhead to work on the bell crank and or remove the drag link. Well, we learned our lesson and jumped back into the meat grinder. We increased the area around the servo for wiring and also the ability to move the servo front to back. We coupled those improvements with easy access to the bellcrank and the drag link, by way of a new upper bulkhead/top deck. You can get the servo in and out in a matter of seconds, whether you want to adjust the horn, or replace your servo.No matter the speed control and receiver you use, we have increased the area to the front and back as well as sides. This gives the end user, more freedom to position his electronics in the most optimal positions. The battery compartment has been expanded to fit a Block Battery or even Saddle packs if you wish to. If you do not want to use either of those batteries, you can use a shorty and move it a smashing 23mm for some serious adjustment no matter what condition you race in.


  • Serpent 1/10 2WD Spyder SRX2 Gen3 Dirt Edition EP (1 set)


  • Radio System

  • Electronics

Rcmart Description
Completeness Unassembled
Drive Train 2WD
Power Plant Electric
Scale 1/10 Scale
Vehicle Type Buggy

Write a review

Please login or register to review

Customers that bought this also purchased...

Xceed 107264
4-5mm Charge Cable w/ 300mm Balancer
USD 6.00
Yeah Racing WPT-0121
Angle Type 4mm & 5mm Connector Plug
USD 4.50 USD 4.90
Tamiya 58587
1/10 DT-03 Neo Fighter Buggy w/ ESC EP
USD 96.00 USD 195.00
Serpent 500011
1/10 4WD Spyder SRX4 Buggy Aluminum Chassis Edition EP
USD 249.90 USD 316.85