0 item(s) - USD 0.00

Overdose Aluminum Adjustable Rear Upright Set Red For XEX GALM Vacula II Yokomo YD-2 YD-4


This is Overdose Aluminum Adjustable Rear Upright Set Red For XEX GALM Vacula II Yokomo YD-2 YD-4. Introducing adjustable aluminum rear upright. The 2 piece structure of axle mount and the upright base allows various adjustments on toe angles, treads and axle heights. Now available in 3 toe angles (0°,1°, 2°) by changing the screw positions, making quantitative settings possible. Having 5 mounting positions for the upper arms accommodates wide range of settings. Tread width can be adjusted by changing the size of spacers between the axle mount and the upright base. Reversing the axel mount creates the choice of standard or 2mm lower positioning of the axle shaft. Steel made adopter pipe is placed at the suspension pin hole. Applicable to 2mm and 2.6mm pins. This makes it compatible with Yokomo YD chassis as well as OD chassis. Includes the original axle shafts. A shorter Drive shaft (approx. 3mm) is required. The original axle shaft optimizes the drive shaft length and angles, improving the traction capability.


  • For: Overdose XEX / GALM / Vacula II, Yokomo YD-2 YD-4

  • Material: Aluminum

  • Color: Red

  • Adjustable aluminum rear upright

  • With a two-piece structure consisting of an axle mount and an upright base, various adjustments such as toe angle, tread, and axle shaft height are possible.

  • The toe angle can be selected from 0 °, 1 °, and 2 ° by changing the screw mounting position. In addition, since only the toe angle changes, quantitative setting is possible.

  • Upper arm mounting positions are set to 5 locations. It corresponds to various settings.

  • The tread width can be adjusted by changing the thickness of the spacer between the axle mount and the upright base.

  • By reversing the axle mount, the axle shaft height can be selected from two types: normal position and 2 mm down.

  • Equipped with a steel adapter pipe at the suspin insertion part. Compatible with both 2mm and 2.6mm suspins. As a result, it can be installed not only on OD chassis but also on Yokomo YD chassis.

  • Comes with a dedicated axle shaft. 

  • Optimized drive shaft length and mounting angle by adopting a dedicated axle shaft. It greatly contributes to the improvement of traction performance.


  • Overdose Aluminum Adjustable Rear Upright (1 set)

Write a review

Please login or register to review

Customers that bought this also purchased...

Acuvance OP-15079
Power Branch Cable For Cooling Fan
USD 7.34
Acuvance OP-15090
RX Connector Conversion Cable Fan Connector
USD 6.13
Sanwa 107A20501A
Short Y Harness Black
USD 6.48
Yokomo RP-042-10B
High-Precision Cutting Brass M3x10mm Flat Head Screws 10 pcs
USD 8.45