MUGEN SEIKI MBX8 1/8 Offroad Worlds Edition Competition Nitro Buggy Car Kit #E2025
Mugen Seiki is excited to release the MBX8 Worlds Edition Nitro Buggy Kit, including many option parts used by Mugen Seiki drivers at the 2018 IFMAR World Championship. Mugen Seiki had four MBX8’s in the 60 Minute final with Ryan Maifield finishing on the podium!
- Wide Offset Wheel Hubs 1mm 2pcs; The 1mm wide offset wheel hubs will increase stability and cornering.
- Inline Front Uprights; The E2146 inline front uprights have smoother steering compared to the stock E2147 trailing front uprights and work great in high traction conditions. E2146 uprights can be used with both CVA and universal style driveshafts.
- -3mm Front Upright Arm; The -3mm front upright arm improves the initial steering response and make the vehicle more stable through the middle and exit of the corner.. The new upright arms also reduce bump steer and make the vehicle more predictable in bumpy conditions.
- 46T Spur Gear; The 46 tooth HTD spur gear provides a great balance of acceleration and top-end speed.
- 12T Pinion Gear
- 42T Conical Gear; The optional 12T bevel gear when used with the 42T conical gear will change the final drive ratio and increase acceleration.
- Center Joint Cup.
- Center Front Dog Bone (84.5mm)
- Center Rear Dog Bone (115mm); The front and rear-center dogbones for the MBX8 reduce friction from the stock universal driveshafts. Less friction will give the vehicle a more efficient drivetrain, increase acceleration, and provide more traction. The dog bones are lightweight, durable, and will increase traction.
- Rear Wing Stay +15mm; The +15mm wing mount has more adjustment and will help increase mid corner rotation and be more stable in high speed conditions.
- Chassis: The MBX8 chassis features an updated material that is more rigid and durable. The chassis improves steering and is more consistent in bumpy conditions.
- Differential and drivetrain: High Traction Differentials are included in the MBX8. The Mugen Seiki HTD provides increased acceleration, longer runtime, and more consistent handling. The HTD’s also increase stability, traction and improve handling in bumpy conditions. The HTD has a larger volume diff cup to increase consistency during long main events. This makes it easier to time rhythm sections, better in bumpy and low grip conditions, helps to increase traction, and increases fuel mileage.
- Updated straight cut 13T bevel gear & 44T conical gear: The straight cut bevel and conical gears increase acceleration, runtime, and efficiency. A free and efficient drivetrain will also increase speeds while cornering.
- Lightweight one-piece wing mount: The updated lightweight one-piece wing mount lower the center of gravity. The position of the wing and wing mount is optimized to improve the performance of vehicle. The height of the wing mount is adjustable. This allows you to control the down force on the rear of the vehicle by simply raising or lowering the mount on the shock tower.
- Lightweight high down-force wing: The updated IFMAR legal wing is lightweight and provides amazing down force and corning. The underside of the wing uses an updated design to reduced weight and creates additional down-force.
- Suspension: The Front Front/Front Rear and Rear Front/Rear Rear suspension blocks have been redesigned for the MBX8.
- Front and rear gearbox: Easier access to the front and rear differential. The updated gearbox allows you to remove and service the differentials without detaching the suspension arm mounts.
- Box-shaped suspension arms and arm stiffeners: The front and rear lower arms use an updated impact resistant material for increased durability. The redesigned arms are box-shaped and include arm stiffeners to reduce flex and increase durability. Adjusting the hardness of the lower suspension arms is now possible. This allows you to fine tune the steering and traction from track to track. CFRP plates will be available as an option part (not included).
- Center differential mount & plate: The center differential mounts use a stiffer material and a redesigned top plate to reduce chassis flex and increases clutch bell, spur gear, and clutch bearing life. The reduced chassis flex also provides more consistent handling in all conditions. The top plate design also makes it easier to adjust the brakes and easier maintenance.
- Enclosed Battery box and updated carbon fiber radio plate: The MBX8 still uses a flat 2S LiPo or LiFe receiver battery, but the battery is now enclosed in a molded battery box. The battery box allows for quick and easy access to the battery. The molded box also helps protect the battery from hard impacts. The battery box is mounted to an updated carbon fiber radio plate.
- Other Updated parts and upgrades: Body, Clamping Servo Saver Nut, Front/Rear Shock Towers, Front bumper, Front center and rear center universal joint.
- MUGEN SEIKI MBX8 1/8 Offroad Worlds Edition Competition Nitro Buggy Car Kit (1 pc)
- Big Block Nitro Engine
- Tuned Exhaust System
- 2 Channel Radio System
- High Torque Steering & Brake Servo's (2)
- Receiver Battery
- Glow Driver
- Starter Box & Batteries
- Nitro Fuel & Fuel Bottle
- Paint for Polycarbonate Body
- Tires, Wheels & Glue
- Charger for Receiver Pack & Starter Box Batteries