KO PROPO VFS-FR2 PRO ESC w/ Reverse For Brushed Motor #KO-40449
This is KO PROPO VFS-FR2 PRO ESC w/ Reverse For Brushed Motor.
- For: Brushed Motor
- Material: Plastic
- Color: Black
- Normal evolution of VFS-FR which was popularly accepted usability ESC with reverse.
- Equipped with forward, brake and back functions.
- Adopt black cord for all wiring.
- Gunmetal plating treatment for the top case.
- Ultimate Booster 2 installed.
- Ultimate capacitor 35V included.
- BEC output 6 V 3A.
- VFS function which can be set with 64 stages of frequency from 500 Hz to 5.3 kHz at each position where the throttle side is divided into 32 is equipped and it can be changed to your favorite throttle feeling.
- Back cancellation is possible when setting up separately for ESC.
- Thermal protection installed.
- LiPo cut equipment (shipped, changeable to NI battery with ICS function)
- Speed Controller for Brushed Motor
- Dimensions: 32.6× 29.0× 19.4mm
- Weight: 25.3g（Only main Unit）
- Compatible motor: Brushed motor unlimited
- Maxmum peak current: 1200A (FET Spec)
- Average maxmum current: 300A (FET Spec)
- Maxmum current : 120A(FET Spec)
- Drive Frequency: Approximate 1.51KHz(Factory setting)
- Operating voltage: 6.6 to 8.4V
- BEC output voltage:6.0V 3A(with protection circuit)
- KO PROPO VFS-FR2 PRO ESC w/ Reverse For Brushed Motor (1 set)