KO PROPO Aluminum RSx3-one10 Flection Type-T Servo For 1/10 RC Onroad #KO-30133
This is KO PROPO Aluminum RSx3-one10 Flection Type-T Servo For 1/10 RC Onroad. Flection will touch the road with smooth cornering and low current consumption, and have received great popularity. Flection Type-T is installed preset data that compatible to Tamiya reguration. Also changed double anodized color to light blue. It is high-end coreless servo.
BEC out put current of TAMIYA brushless ESC that listed in the TAMIYA regulation is 1.5A. It means if using ESC that need over 1.5A, the possibility of failure will increase. So,If servos receives overload in the crush etc, the possibility of failure are high. In such a situation, Flection TypeT is designed to make it difficult for a current of 1.5 A or more to flow. But this performance as same as high end servos. Servo that have good operation feeling and decrease possibility of failure in the ESC.
Flection means flexible and Curvature, it will touch the road with smooth cornering. With the delicate operation and enhanced torque of the newly developed core-less motor, we have acquired an unprecedented handling performance.
After the primary anodizing, further cutting and a secondary anodizing is applied. The top case is manufactured through a double anodizing process and is finished by becoming very lightweight while securing adequate strength by cutting the inner thickness to the limit. A delicate and fearless design form was born, which imagined the suppleness and strength of Flection.
HCS (High speed Communcation System) is the new high speed communication system between the receiver to the servo. The HCS mode shortens communication time of the signal which is compressed. HCS compatible servos is changing mode automatically by signal from receiver. So HCS compatible servos can use with all receivers.
- For: 1/10 RC Onroad
- Material: Aluminum
- Color: Black
- The hard alumite aluminum gear
- Core-less motor
- Dual bearings
- The hard servo gear shaft
- The aluminum top case
- The aluminum heat sink middle case
- Black cable
- Gold plated connector
- HCS Compatible
- Torque: 12.5Kg-cm Speed: 0.09sec/60deg(@7.4V)
- Torque: 11.8Kg-cm Speed: 0.10sec/60deg(@6.0V)
- Dimensions: 40.5×26×21mm (Low Profile)
- Weight: 53.3g
- Operating voltage: 6.0～7.4V (Lipo,Life,Ni-MH)
- KO PROPO Aluminum RSx3-one10 Flection Type-T Servo (1 pc)
- Grommet (4 pcs)
- Screw for Horn (1 pc)