KO PROPO Aluminum RSx3 One 10 Ver.D Servo For 1/10 2WD Drift #KO-30131
RSx 3-one10 Ver. D which inherited the RSx One 10 gene that has been active in a number of races is a dedicated design servo specialized for 2WD drift.
Equipped with an aluminum top case with stylish laser engraving and milling processing on the case size of a ropero type ideal for 1/10 category. We inherit the smooth and linear operation unique to RSx and anyone can easily drift. Vibration of Servo, which is easy to occur when using a gyro with 2WD drift, it will be not happen with RSx 3-one 10 VerD. Five types of data that match various road conditions and usage are already installed. Please try experiencing drift control of high spec with RSx3-one10 Ver.D.
Laser marking processing is applied to 3 sides for the top case, 2 sides for the middle case. In addition, we have secured a sophisticated image with advanced milling cutting process. By making the alumite color chic black it can be mounted without incongruity even if it is mounted in various drift chassis. Middle case uses aluminum heat sink with excellent heat radiation efficiency and milling process for design accent , gear adopts metal gear (However, only one piece is made of plastic.).
Commitment also extends to servo wire. The appearance and tightening black cable has the softness optimum for handling while securing the necessary current capacity. Compatibility with drift gyro gyro KG-X is outstanding.
HCS( High Speed Communication System) is the new high speed communication system between the receiver to the servo. The HCS mode shortens communication time of the signal which is compressed. HCS compatible servos are changing mode automatically by signal from receiver. So HCS compatible servos can use with all receivers. If you want to use servos by HCS, please use with HCS compatible receivers.
RSx3-one10 Ver.D is installed preset setting of 5 models. You can change each model by Servo model selector for fit to your car or track easily. It is useful for bigginer to expert drivers, evryoone can setting for situation of track.
- For: 1/10 2WD Drift
- Material: Aluminum
- Color: Black
- Stylish Laser engraving + top case of milling processing
- Dedicated design servo specialized for 2WD drift!
- Easy handling black servo lead
- Compatible for H.C.S
- Installed preset settings
- The hard alumite aluminum gear
- Core-less motor
- Dual ball bearings
- The hard servo gear shaft
- The aluminum top case
- The aluminum heat sink middle case
- Black cable
- Gold plated connector
- HCS Compatible
- Torque: 8.2Kg-cm Speed: 0.08sec/60deg(@7.4V)
- Torque: 7.0Kg-cm Speed: 0.09sec/60deg(@6.0V)
- Dimensions: 40.5×26.5×21mm (Low Profile)
- Weight: 48.0g
- Operating voltage: 6.0～7.4V (Lipo,Life,Ni-MH)
- KO PROPO Aluminum RSx3 One 10 Ver.D Servo (1 pc)
- Grommet (4 pcs)
- Screw for Horn (1 pc)