KO PROPO SG-1 RSX3-ONE 10 Ver.D w/ KG-X Gyro Servo Model Selector Drift Set For 1/10 RC Drift #KO-92399
- KO PROPO Aluminum RSx3 One 10 Ver.D Servo For 1/10 2WD Drift #KO-30131
- KO PROPO X Overdose KG-X Drift Spec. Gyro For 1/10 On Road #KO-60229
- KO PROPO Servo Model Selector For RSx2 RSx BSx2 RSx one10 BSx2 one10 #KO-61029
KO PROPO Aluminum RSx3 One 10 Ver.D Servo For 1/10 2WD Drift #KO-30131
RSx 3-one10 Ver. D which inherited the RSx One 10 gene that has been active in a number of races is a dedicated design servo specialized for 2WD drift.
Equipped with an aluminum top case with stylish laser engraving and milling processing on the case size of a ropero type ideal for 1/10 category. We inherit the smooth and linear operation unique to RSx and anyone can easily drift. Vibration of Servo, which is easy to occur when using a gyro with 2WD drift, it will be not happen with RSx 3-one 10 VerD. Five types of data that match various road conditions and usage are already installed. Please try experiencing drift control of high spec with RSx3-one10 Ver.D.
Laser marking processing is applied to 3 sides for the top case, 2 sides for the middle case. In addition, we have secured a sophisticated image with advanced milling cutting process. By making the alumite color chic black it can be mounted without incongruity even if it is mounted in various drift chassis. Middle case uses aluminum heat sink with excellent heat radiation efficiency and milling process for design accent , gear adopts metal gear (However, only one piece is made of plastic.).
Commitment also extends to servo wire. The appearance and tightening black cable has the softness optimum for handling while securing the necessary current capacity. Compatibility with drift gyro gyro KG-X is outstanding.
HCS( High Speed Communication System) is the new high speed communication system between the receiver to the servo. The HCS mode shortens communication time of the signal which is compressed. HCS compatible servos are changing mode automatically by signal from receiver. So HCS compatible servos can use with all receivers. If you want to use servos by HCS, please use with HCS compatible receivers.
RSx3-one10 Ver.D is installed preset setting of 5 models. You can change each model by Servo model selector for fit to your car or track easily. It is useful for bigginer to expert drivers, evryoone can setting for situation of track.
KO PROPO X Overdose KG-X Drift Spec. Gyro For 1/10 On Road #KO-60229
This is KO PROPO X Overdose KG-X Drift Spec. Gyro For 1/10 On Road.
KG-X IS INTELLIGENT STEERING ASSIST GYRO UNIT WHICH IS OPTIMIZED FOR USE WITH RWD DRIFT CAR. Next generation Gyro system, covering all required functions for Drift cars, such as AGC function, End point adjust (each L/R ) function, PCA function, etc. *KG-X is a collaboration product with OverDose company.
With a conventional gyro system, servo vibrations occur when increasing gain setting. The AGC function equipped with KG-X enables to stop the vibration and operate servo normally.
KG-X enables settings of end point of servo independently for each side(L/R). This function is effective; 1), To limit the maximum movement angle of servo to protect linkage and knuckle etc. from damage. 2), To secure the same movement angles for the both end points. Settings are to be kept memorized until next setting.
PCA is the abbreviation of Priority Control Adjuster. The mixing ratios of the gyro signal and steering signal can be changed. Steering control performance can be obtained without feeling the use of the gyro.
After connecting 3ch input port of KG-X to the port connect to 3ch (or 4ch) of the receiver, the Gyro gain can be changed by operating 3ch (or 4ch) of transmitter while driving a R/C car. * Black connection cable (100mm) NO.36519 (Option) is required for the connection.
KO PROPO Servo Model Selector For RSx2 RSx BSx2 RSx one10 BSx2 one10 #KO-61029
This is KO PROPO Servo Model Selector For RSx2 RSx BSx2 RSx one10 BSx2 one10.
This Servo Model Selector allows for up to 5 different model pre-set memories stored in the servo to be selected. Servos that are compatible are the RSx/RSx2/BSx2 servos. Creating the pre-sets in the servo can be saved to your servo by using the ICS USB adapter in advance. (BSx Standard and PDS servos are not compatible.)
- For: 1/10 2WD Drift
- Material: Aluminum
- Color: Black
- Stylish Laser engraving + top case of milling processing
- Dedicated design servo specialized for 2WD drift!
- Easy handling black servo lead
- Compatible for H.C.S
- Installed preset settings
- The hard alumite aluminum gear
- Core-less motor
- Dual ball bearings
- The hard servo gear shaft
- The aluminum top case
- The aluminum heat sink middle case
- Black cable
- Gold plated connector
- HCS Compatible
- For: 1/10 Electric Drift car (RWD/AWD), 1/10 Electric F-1, 1/10 Electric Touring car
- Color: Black
- High Speed response compatible (Normal mode / HCS mode)
- AGS function
- PCA function
- Input channel: 2ch (Steering signal: 1ch) *If you want to use gain setting by transmitter, please use 4ch transmitter.*
- Aluminum heavy duty outer case
- Compatible with: any KO receivers & any KO servos
- For: RSx/RSx2/BSx2 servos
- Material: Plastic
- Color: Black
- Torque: 8.2Kg-cm Speed: 0.08sec/60deg(@7.4V)
- Torque: 7.0Kg-cm Speed: 0.09sec/60deg(@6.0V)
- Dimensions: 40.5×26.5×21mm (Low Profile)
- Weight: 48.0g
- Operating voltage: 6.0～7.4V (Lipo,Life,Ni-MH)
- Operating Voltage: 4.8 to 7.4V
- Dimensions: 20.0 x 24.0 x 14.0mm
- Weight: 8.3g
- Speed: 0.08s @60°(7.4V), 0.09s @60°(6.0V)
- Torque: 8.2 kg-cm(7.4V), 7.0 kg-cm(6.0V)
- Size: 40.5 x 26.5 x 21 mm
- Weight: 42.1g
- KO PROPO Aluminum RSx3 One 10 Ver.D Servo (1 pc)
- Grommet (4 pcs)
- Screw for Horn (1 pc)
- KO PROPO X Overdose KG-X Drift Spec. Gyro (1pc)
- Black Connection cable (for 1ch-IN) (1pc)
- KO PROPO Servo Model Selector For RSx2 RSx BSx2 RSx one10 BSx2 one10(1Pc)