Team Associated RC10CC | Crystal Clear Version Classic RC10

Pre-Order 2.0 Open Now! Link at the bottom of this page!

2nd Lot - Early Feb, 2024 - Pre-Order Now!
1st Lot - End Dec, 2023 - Closed

RC10CC Classic Clear Kit is about to launch!

【2023.10.30】RC10CC Classic Clear Kit is about to launch!Team Associated announced that it will officially launch a clear version of the classic car RC10 mentioned in the previous photos on the market! The name is "RC10CC Classic Clear Kit", and the MAP is US$319.99 (approximately HK$2496). Do you feel interested in getting one?

//Yep, you were right, we made them full production! Say hello to the RC10CC Classic Clear Kit. We moulded the RC10 Classic in polycarbonate clear and did all the metal components in raw and silver anodized. //

RC10CC Classic Clear Edition Kit #6004

Own the car that changed RC off-road racing forever. Now in a crystal-clear collector's edition!
MSRP: $469.99 MAP: $319.99 ( approximately HK$2,496) Official price to be determined

THE RC10CC COLLECTOR'S EDITION KIT

Own the car that changed RC off-road racing forever. Now in a crystal-clear collector's edition!

We have shown you our SLA prototype race cars for years and how we use them for parts fit and testing. Our goal with the RC10CC was to provide you with the same look and feel as our SLA prototype display vehicles but more cost-effective and practical. We took the RC10 Classic and shot many of the molds in polycarbonate clear.

While it is stronger than SLA and could be driven, it was manufactured as a display piece for your collection. The polycarbonate clear components will only be available in the kit. They will not be sold individually.

RACE-WINNING ENGINEERING

The RC10CC suspension is damped for maximum traction by long-throw, fluid-filled racing shocks using machined alloy cylinders and drill-blank shafts for silky-smooth action.

The RC10CC suspension gives you all the adjustability of full-size race buggies. The A-arm/Ball joint design allows precise camber, caster, ride height, and spring rate tuning. The adjustable VariLok differential is included, and the updated chassis fits 6-cell NiMH and 2S LiPo battery packs.

Exceptional ground clearance and low center of gravity also contribute to the superb balance and performance of the RC10CC.

RACE-WINNING DESIGN AND PERFORMANCE

The RC10 started as the vision of Team Associated's founder Roger Curtis ("RC") and became one of the most iconic RC cars in history.

In celebration of the 40th anniversary of the original RC10, we are proud to bring to you the RC10CC Classic Clear Edition kit, a faithful reproduction of Roger's World Championship-winning design that changed the world of RC off-road racing forever.

The design and construction of the RC10CC is totally unique to electric off-road cars, featuring a rigid alloy monocoque tub with fully adjustable suspension.

Included are Associated's custom coil-over aluminum racing shocks, VariLok differential, and modular 3-piece clamping wheels.

Engineered for easy assembly and maintenance, the RC10CC is also easy to drive over all kinds of terrain.

GET A JUMP ON THE COMPETITION

Independent suspension with coil-over shocks help smooth out the bumps. Precision-molded, nylon suspension components can be easily custom color dyed. A-Arm/Ball joint design permits static camber, camber rise, caster, ride height, and spring rate tuning to suit every type of track.

The smooth undercarriage of the RC10CC's aluminum monocoque tub and special gearbox provide maximum ground clearance.

Full race rear suspension includes durable dogbone and stub axle drivetrain with pinned modular wheels. Quick-release knockoff design provides fast, accurate alignment. Low-profile gearbox uses VariLok adjustable diff and is protected by an integrated motor/heatsink.

The RC10CC Classic is designed to fit 6-cell NiMH and 2S LiPo battery packs
Modular, 3-piece wheels
Adjustable aluminum racing shocks
Front skid plate
T6 aircraft aluminum monocoque chassis
Fully adjustable four-wheel independent suspension

Other Features

Authentic replica of the RC10 Buggy Kit originally released in 1984
Silver-anodized 6061-T6 aluminum monocoque tub chassis
Fully adjustable four-wheel independent suspension
Long-travel, fluid-filled silver anodized aluminum coil-over shocks
Low profile, sealed six-gear transmission
VariLok adjustable ball differential
Exceptional ground clearance with low center of gravity
Front and rear tires with modular racing wheels
Clear Pro-Tech body with driver figure and wing
Fiberglass shock towers
Oilite bushings throughout
Fits 6-cell NiMH and 2S LiPo battery packs
Assembly and painting required.

Features

Authentic replica of the RC10 Buggy Kit originally released in 1984
Silver-anodized 6061-T6 aluminum monocoque tub chassis
Fully adjustable four-wheel independent suspension
Long-travel, fluid-filled silver anodized aluminum coil-over shocks
Low profile, sealed six-gear transmission
VariLok adjustable ball differential
Exceptional ground clearance with a low center of gravity
Front and rear tires with modular racing wheels
Clear Pro-Tech body with driver figure and wing
Fiberglass shock towers
Oilite bushings throughout
Fits 6-cell NiMH and 2S LiPo battery packs

Due to ongoing R&D, photos may not match final kit.

Team Associated Clear Version Classic RC10

【2023.10.24】With Team Associated attending the SEMA Show, they are also using that as the starting point for the pending 60th Anniversary of Associated Electrics (1964) and 40th Anniversary of the RC10 (1984), they have created some a little special.

To pay homage to the RC10, they decided to make a special display piece, and since AE know its racers love the SLA prototype race cars they have shown over the years, they decided to make an RC10 version the same way.

Utilising the RC10 Classic SolidWorks models, they were able to produce crystal clear parts. They have also kept the chassis, nose plate, motor plates, and shocks silver to give that prototype feel and awesome wow factor.

Prototypes are limited to only 10 units worldwide

【2023.10.24】To pay tribute to the RC10, Team Associate has produced 10 special sets of transparent display pieces. If AE gave away one of these after the show, would you like it?

//We can't get enough of these clear RC10s. We made 10 total vehicles. Maybe after the show we should give 1 away, what do you think?? //

Hand drawings RC10 in 40 years ago

【2023.10.29】Did you know that the original Team Associated RC10 was designed and drawn entirely on paper? Yes, it is.

In fact, AE still has the same drawing sheets that were used as well as the hand drawings that were created, perfect for taking photos.

If you look closely, you can see the original name of the RC10 project -> ORV

Have you ever owned an RC10?

Clear version of the 1st generation－Classic RC10

【2023.10.24】Clear version of the classic RC10 RC off-road vehicle

Team Associated at the 2023 SEMA Show

【2023.10.24】Associated Electrics, Inc. will be participating in the SEMA Show, which will include multiple new product announcements, company history, never-before-seen behind-the-scenes content, and more. Stop by the Team Associated booth at 21643 Central Hall or follow our social media channels for all the latest happenings before, during and after the show. Team Associated will be showcasing a number of RC cars, major new launches and new custom full-scale vehicles.... ( Details )