This is Gmade GS02F Buffalo 1/10 TS Crawler Car Kit. GS02F frame is designed to look as a chassis of a real car frame and the material of the frame is made of high strength steel, C-channel side rail and is with hex wrench bolted with cross members, which make it resistant to twisting or wraping. Also, steel parts are black powder coated finish to prevent rust. The inner fender is directly fixed to the frame to reduce the flex and bending of the chassis and parts, it also reduces external objects to entering to the chassis during driving.
GS02F's weight balance designed to be placed on the forward of the chassis. This will increase the tire tracktion to the front wheel to provide better crawling on a high tilt angle rocks and better driving performance when hill climbing and this will help minimizing the vehicle's rolling over when climbing.
GS02F steering system has a steering servo on the frame just like a 1:1 real car. It is designed to make it as closed to the zero bump steer so bump steer movement does not appear by front wheel suspension movements, so we ended up with maximizing the steering performance of the vehicle. In addition, the Panhard-bar is designed to avoid interference with nearby parts, so that the front suspension and shocks can move freely without any loss.
SD Scaler Shock is a Coil-over styled oil shock absorber optimized for the scale trucks. The oil filled inside the shock minimizes splash when the vehicle is driven, and provides a high-durability aluminum shock body with 3.5mm heavy duty shock shafts are added, these will help you to drive roughly on rough surfaces. Beginners also can easily assemble this shock and change setups, and the adjustable nut makes it easy to adjust the ride-hight so you can quickly change your car setup even when driving condition changes.
STEEL LADDER FRAME
ADJUSTABLE WHEELBASE: GS02F chassis allows three type of easy adjustment of wheelbase convert kit to use any type of 313 and 324mm custom bodies. (optional link kits are sold separately)
FRONT WEIGHT BALANCE
FRONT MOUNTED MOTOR: Able to use 540 or 550 size motor with cooling fan with option. The motor is designed to mounted in front of the chassis, so it can increases more tire traction to the front side.
MULTIPLE BATTERY LOCATIONS
CHASSIS MOUNTED SERVO SYSTEM WITH PANHARD BAR
The GS02F transmission is designed to look as a real 1:1 scale vehicle, and provides the best performance according to the driving situation.
The GS02F transmission is designed to rotate the front wheel faster than the rear wheel.
BETTER STEERING RADIUS: Vehicles with overdrive on the front axle has an improved steering radius compared to non-overdrive vehicles, making it easier to control when driving on the rough surfaces.
BETTER CLIMBING: Increasing of the tire traction allows the vehicle to pass through steep slopes and obstacles without lifting the front of the body upward.
2-SPEED HI/LO TRANSMISSION
TORQUE TWIST REDUCE TRANSMISSION
EASY ADJUST MOTOR MOUNT
Dual slipper clutch
All metal internal gears
Hardened carbon steel universal joints
KINGPIN ANGLE: Keeping the scrub radius to a minimum to let your steering servo work at it's full potential and increases the steering efficiency.
HI STEER KNUCKLE ARM: By increasing the approach angle, you can over climb the obstacles more easily than a typical trial trucks.
ZERO ACKERMAN STEERING
SD SCALER SHOCK ABSORBER
MT-1904 1.9 INCH M/T OFF-ROAD TIRE
1.9INCH NR01 BEADLOCK WHEEL
BUFFALO LEXAN BODY
STEALTH BODY MOUNT
Width : 240mm
Height : 269mm
Height(with out roof rack) : 246mm
Length : 540mm
Wheel base : 313mm
Ground clearance : 77mm
Weight (no electronics) : 2.22kg
Gmade GS02F Buffalo 1/10 TS Crawler Car Kit (1 set)