0 item(s) - USD 0.00

Castle Creations Mamba X Waterproof 1/8 25.2V Brushless ESC w/ 2200kV 1515 Sensored Motor Combo Box Scratched

USD 219.99 USD 255.00 (Save 13.7%)

Please log in to receive a notification when this item arrives in stock.
+ -
 Add to Wish List
Out Of Stock!
Share with Friends

Photo(s) for reference only


Tags: Castle Creations Car Brushless System

Castle Creations Mamba X Waterproof 1/8 25.2V Brushless ESC w/ 2200kV 1515 Sensored Motor Combo #010-0155-05

Description:

The Castle Mamba X Waterproof 1/8 Brushless Combo is a pint size powerhouse. The ROAR APPROVED Mamba X ESC has been combined with the 1512 1.5Y 1800kv motor to give lighter 1/8th scale buggies, 4wd short course trucks and bashers under 9 pounds another option to overpower their rigs!

The Mamba X represents the latest and greatest in Castle Creations ESC technology, and it delivers amazing race capabilities for 1:8th scale eBuggy. After being extensively race-tested by Castle Creations' Lead Mechanical Engineer and Team Driver, Taylor James - the Mamba X has been approved for eBuggy racing with Castle's most popular 15 Series Motors.

The 1515 1Y 2200kv motor is normally paired with the 1/8th scale Mamba Monster X ESC; but if you need to save some weight or can benefit from a smaller footprint, the Mamba X is more than capable of running this motor. This setup is recommended for 3s or 4s use in a vehicle weighing less than ~9lbs and geared for no more than ~45 MPH. If you have a heavier vehicle, looking for more speed or just want to beat the ever loving snot out of your vehicle, Castle recommends picking up the Mamba Monster X combo.

Feature:

  • ESC:
    • Wide 2S to 6S input voltage range (3-4S LiPo MAX w/1515-2200KV MOTOR)
    • Sensored Motor Support (Castle X-Series Sensor Harness Included)
    • Waterproof
    • 8A Adjustable BEC (5.25V-8.0V)
    • Data-logging
    • Rugged CNC Aluminum Case
    • Castle Link Programming Support
    • SmartSense™
    • Integrated Capacitors
    • Removable 30mm Cooling Fan
    • Integrated 4mm Bullet Connectors
    • 12 AWG Power Wires
    • Waterproof Switch
    • Audible Alerts
  • Motor:
    • 4-POLE 12-SLOT Rebuildable Design
    • QUIETSENSE™ Technology
    • ROAR Standard Sensor Port and Labeled Connections
    • High-Performance 0.2 mm Steel Lamination Stacked Stator
    • High-Strength Kevlar Wrap
    • High-Strength, 180° C Grade, Neodymium Sintered Magnets
    • Oversized, Low-Resistance, Gold-Plated Solder Tabs
    • Oversized NMB Bearings
    • M3 and M4 @ 25mm Mounting Hole
    • 4mm male Castle Bullet Connectors
    • 210mm length Sensor Wire
    • Optional cooling fan coming soon
    • Silicone coated sensor board

Specification:

  • ESC:
    • Input Voltage Range: MIN: 2S LiPo
    • MAX: 6S LiPo (25.2V) (Max 4s with included motor)
    • BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
    • Operating Environment: Waterproof* design allows for use in nearly any environment.
    • Brake: Proportional
    • Reversible: Yes, but may be disabled for racing.
    • On/Off Switch: Yes
    • Cooling Fan: Yes, factory equipped (30mm), fully removable
    • Size: 2.14x1.39x1.18" (54.4x35.2x30.0mm)
    • Weight (with wires): 3.56 oz. (101g)
    • Connectors: 4.0mm female bullets for motor connection.
    • Items Needed for Operation: Battery Connector required
    • Application Guidelines: Intended for up to 4s (25.2 Volt) operation in vehicles weighing less than 9bs/4kg with 1515 - 2200kv motor.  SW VS. 1.82 ROAR APPROVED
    • Max. Recommended Vehicle Weight: Less than 9bs/4kg, with batteries, ready-to-run
    • Programmability: Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software.
    • Telemetry Link Capable: Yes
  • Motor:
    • Input Voltage Range: 3-4S LiPo w/Mamba X ESC
    • Kv: 2200
    • Max. RPM: 60,000
    • Size: Length: 75.4mm
    • Diameter: 40mm (41.4mm with fins)
    • Weight (w/wires): 429g / 15.1oz
    • Shaft Length: 20mm
    • Shaft Diameter: 5mm
    • Mounting Hole Specifications: M3 and M4 @ 25mm
    • Cooling Fan: Optional, coming soon!
    • Connectors: 4mm male Castle Bullet Connectors, includes 210mm length sensor wire.
    • Application Guidelines: Ideal for 1:8 scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 9lbs on 4S LiPo
    • Max. Recommended Vehicle Weight: See application guidelines
    • Running modes: SMARTSENSE™, Sensored only

Include:

  • Castle Creations Mamba X Waterproof 1/8 25.2V Brushless ESC w/ 2200kV 1515 Sensored Motor Combo (1 set)

Write a review

Please login or register to review

Customers that bought this also purchased...

Sale
Tamiya 58666
1/10 WR02CB Comical Hornet 2WD Offroad Buggy Kit EP w/ ESC
USD 92.90 USD 223.00
Vanquish VPS04313
HD Aluminum Truss For Axial Wraith Grey Free Ship
USD 38.50
Free Shipping
Vanquish VPS07971
Aluminum Axle Servo Mount Clear For Axial AR60 Housings
USD 11.99
Vanquish VPS03231
Aluminum 3D Machined Differential Cover Clear For Axial Wraith Yeti SCX10
USD 28.50