3Racing 1/10 Sakura XI Sport Toyota 86 Touring Car Kit #KIT-86XS
3Racing Sakura XI Sport 1/10 RC Touring Car #KIT-SAKXI-S
3Racing has introduced its successor to the popular Sakura Zero Touring car the Sakura XI featuring some innovative designs which distinguishes itself from anything else currently available. The original Sakura Zero was developed during the transitional time between brushed and brushless motor, Ni-MH and Lipo batteries, technology has come a long way since then and with all the knowledge and experiences accumulated from the development of the Sakura Zero, 3Racing has designed a completely new touring car specifically for Brushless Motors and Lipo Batteries resulting in a much more consistent car from track to track and varying conditions, easier and less maintenance with some added adjustability. The New Sakura XI is one of the most innovative touring car designs currently available with many unique designs that are both easily identifiable and subtle to the naked eye.
Long Stroke Shocks with Threaded Shock Body.
Chassis Mounted Composite Motor Cooling Fan for 40 and 30mm Fans.
Front Belt Stabilizer.
Improved Material. Universal Driveshafts all round.
3 Racing's Factory Racing Products Spec Updated Gear Differential.
Race Spec Composite Front Spool with Replaceable Drive Cups from the all new soon to be released Sakura Ultimate.
New Composite Adjustable Battery Mounts with Precision Positioning System from the Sakura Ultimate.
New Dual Bell Crank Steering System sharing the same geometry as the Sakura Ultimate counterpart.
Race Spec Drive Belts.
* Photos for reference only.
- 2 Channel Radio System
- Steering Servo
- Electronic Speed Controller
- 540 Type Motor and 48 Pitch Pinion Gear
- Polycarbonate Body Shell and Paint
- Battery and Charger
- Assembly Tools
3Racing Toyota 86 Clear Body Parts Set 1 pc For 1/10 RC #LBD-86
This is 3Racing Toyota 86 Clear Body Parts Set 1 pc For 1/10 RC.-->
- Center Front Body Support
- Fully ball raced
- Long Stroke Shocks with Threaded Shock Body
- Improved Material
- Improved Mold Design
- Chassis Mounted Composite Motor Cooling Fan for 40 and 30mm Fans
- Front Belt Stabilizer
- Premium Grade Anodized Low CG 7075 Alum Motor Mount
- Universal Driveshafts all round
- Composite Bulkhead Diff Covers with Torsion Strut
- 3 Racing's Factory Racing Products Spec Updated Gear Differential
- Race Spec Composite Front Spool with Replaceable Drive Cups from the all new soon to be released Sakura Ultimate
- New Composite Adjustable Battery Mounts with Precision Positioning Systemfrom the Sakura Ultimate
- Composite Upper Bumper Mount
- Newly designed Ball Caps
- New Dual Bell Crank Steering System sharing the same geometry as the Sakura Ultimate counterpart
- FRP 2.5mm narrow design Lower chassis, 2.0mm Upper Chassis and 3.5mm Shock Towers
- New Suspension geometry using the same newly developed components from the Sakura Ultimate
- Ultra Fit Composite Servo Horn
- Race Spec Drive Belts
- Two Piece Composite Rear Forward A Arm Pivot Pin Mounts for maximum rear chassis flex
- For: 1/10 RC
- Material: Lexan
- Clear protective film to prevent overspray: Yes
- Pre-drilled mounting holes: No
- Length: 434mm (without Body & Foam Bumper)
- Weight: approx. 1380g
- Wheelbase: 257mm
- Tread Front and Rear: 163mm (Front) / 161mm (Rear)
- Gear Ratio: 2:1 (38T/19T)
- Width: 190 mm
- Wheelbase: 257 mm
- 3Racing Sakura XI Sport 1/10 RC Touring Car #KIT-SAKXI-S
- 3Racing Toyota 86 Clear Body Parts Set 1 pc For 1/10 RC #LBD-86
- 3Racing Sakura XI Sport 1/10 RC Touring Car (1 Set)
- Tire (4 pcs)
- Wheel (4 pcs)
- Toyota 86 Clear Body (1 pc)
- Front Light Case (1 pair)
- Rear Light Case (1 pair)
- Rear Wing (1 pc)
- GT Rear Wing (For Race) (1 pc)
- Sticker (1 pc)
- Masking Sticker (1 pc)
- Body Clip (6 pcs)
- M3x6mm Flat Head Screw (2 pcs)
- M2.6x6mm Button Head Screw (6 pcs)
- 3mm Lock Nut (2 pcs)
- 3mm O-Ring (2 pcs)
- Double-Sided Tape (1 pc)
- Manual (1 pc)