0 item(s) - USD 0.00

Futaba High Torque Digital Servo for 1:8 / 1:10 RC Touring Car/Boat

USD 75.90 USD 83.90 (Save 9.5%)

Please log in to receive a notification when this item arrives in stock.
Out Of Stock!

配送到香港地址或網購自取,請前往 rcMart香港站 購買此產品
For delivery within Hong Kong, please order from rcMart Hong Kong

Photo(s) for reference only

Tags: Futaba High Torque Servo

Over voltage or reverse polarity. Maybe user problem.


  • Coreless Motor
  • High Torque
  • Metal Gear
  • Dust and Water Resistance Servo


  • Dimensions: 40.0×20.0×36.6mm
  • Operating Speed: 0.10sec/60°(6.0V)
  • Output torque 8.7kg・cm

    Current Drain: Futaba Digital servo is specially designed for HIGH-TORQUE or HIGH-SPEED, therefore very high CURRENT drain is normal at startup. For ultimate performance when using this servo please review the following points. (1) When using a NICAD BATTERY the following will occur. (If using DRY-CELLS there will be less performance.) (2) When using systems with the BATTERY FAIL SAFE function it has a higher CUT-OFF VOLTAGE SETTING which will cause shorter operation time. (3) When installing the servo please check PUSHROD LINKAGE to make sure there is no binding in order to prevent excessive power consumption and decrease the life of the motor and battery.

    This digital servo cannot be used with following transmitters (servo neutral signal: 1310us) CONQUEST AM, FG series (T4FG, T5FGK, T6FG, T6FGK, T7FGK), New Terratop, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.

  • Use the horn set screw supplied with the servo. (Screw size: 3 x 8mm)
  • The servo horn can be used the only 3mm in diameter of the hole center.
  • For full performance of digital servos, please use them only with FM and PCM system. Do not use digital servos with AM systems.
  • Do not turn the servo horn forcibly in the power off state. The interior maybe damaged.

    Servo Comparison

    Need a plastic Case for it???

  • Rcmart Description
    Brand Futaba

    Write a review

    Please login or register to review