A great item that goes perfect with the yeah racing aluminum front arms. They will not bend like stock plastic parts and look far nicer. I would recommend using longer fine threaded screws to mount these and place 3mm lock nuts behind them so they will never move or loosen up. Don't use liquid thread locker on the threads just use longer screws and a 3mm lock nut on the back of the parts. Make sure not to overtighten the screws because your shocks will not work right. I tighten up the screws then put a 3mm lock nut on the back of the parts. Leave the 3mm lock nut back a bit from being tight then loosen the screw so the parts will move freely and allow suspension/shocks to work perfectly. This will assure your truck's suspension to work flawless. Also fit dualhunter, twin detonator, double blaze, plus can also be used on the blackfoot xtreme, mighty bull and overlander.