I bought this part for my Tamiya TA05 ver.II and the graphite is nice and thick and the install was great. Unfortunately, this piece is wider than kit stock so now the rear body posts do not line up with the holes in the body. This should have been noted in the description and I am disappointed.
Another item that should upgrade to. This part made from Graphite so it stronger than the stock one. It comes with all necessory need. You can move your damper position too. One thing to remind that you have to new holes in your body.
Nice fit. Extra holes for mounting the shocks. This part makes the bodyposts go a little bit further out so going from Original plastick suspension mount to this makes the bodypost holes like 5mm wider.
But that doesnt bother me. Got a TRF415 and now I dont have to drill more holes for boddyposts on my bodyshells.
This part is good for what it is supposed to do which is to stiffen up the shock tower but there is one problem. You have to move your body mounts further outward to align with the holes cut in the tower which means you will have to re cut the body holes in all of your old bodies. There is a way to mount them without the body hole issue which is to cut the mounting pegs from the bottom of the posts and use only one screw apiece to hold the posts on the chassis. This leads to body posts that wobble from side to side. You will definitely have to think of some creative mounting techniques to get past these issues.