Phone Order Support: US +1(626)404-7382 | UK +44(020)8133-9382 | HK +(852)2858-6382

  1. Yeah Racing MT-4 MT-4S Telemetry Sensors Upgrade Kit for Brushless Motor #YE-0020
    [YE-0020]

    Rating: 4 of 5 Stars! [4 of 5 Stars!]   (2 Reviews)

    Our Price:  Price: USD$19.90 USD$29.90
    You Save: $10.00 (33%)

    Stock: 20+

    Buy this item and earn 20 points valued at USD$0.08.

    Write a Review
    Quantity:
     

Yeah Racing MT-4 MT-4S Telemetry Sensors Upgrade Kit for Brushless Motor #YE-0020

Introduction:


Yeah Racing MT-4 MT-4S Telemetry Sensors Upgrade Kit is specially designed for Sanwa MT-4 MT-4S telemetry system. The original MT-4 telemetry system is renowned for its innovative incorporation of temperature and RPM sensors and telemetry system in its kit. The Upgrade Kit is a replacement of the 2 kit sensors and aims at simplifying installation and provides even more accurate and stable sensor readings for RC enthusiast.

Designed to Simplify:


Yeah Racing MT-4 MT-4S Telemtry Sensors Upgrade Kit integrates both temperature and RPM sensors into one small unit. This small unit is then mounted to a specially-designed aluminum mount which also provides pre-drilled mounting positions for 25mm / 35mm cooling fan. The entire unit can then be mounted to the motor just like a normal clamp-type heatsink.

Temperature Sensing:


The temperature sensor, which has the same level of accuracy as the original one, is strategically positioned underneath the PCB with flexibility to adjust to an optimal position of just touching the motor body for precise measurement.

RPM Sensing (for Brushless Motors ONLY):


RPM sensing can never be easier with the MT-4 Sensors Upgrade Kit. By capturing the magnetic field generated around the brushless motor using specially-designed electronics and antenna on the PCB, it can convert the captured data into RPM signal for the MT-4 telemetry receiver. Accurate measurement at over 100,000rpm in real time is feasible!
This completely contactless approach provides the following benefits:
  • No clumsy installation (and subsequent maintenance) of IR sensor and reflective tape
  • Genuine RPM reading of the motor rather than the spur gear
  • In-car vibration and dirt will not interfere your readings any more

  • Installation and Calibration


    1. Secure the sensor board to the mount using the supplied screws (Figure 1)
    2. Adjust the angle of the temperature sensor so that it should be touching the motor body firmly after mounting on the motor (Figure 2)
    3. Clamp it to the motor (Figure 3)
    4. Position the mount as close to the pinion side as possible for better RPM sensing
    5. Make sure the temperature sensor is touching the motor body.
    6. Connect the supplied wires from the sensor board to the RX-461 receiver.
    7. Connect the car battery, switch on the radio and the ESC.
    8. Switch the MT-4 transmitter to telemetry mode. (Figure 4)
    9. Pull the throttle slowly and you should see RPM reading.
    10. If there is no RPM reading, slowly adjust the trimmer on top of the sensor board while applying throttle until you get reading on the transmitter.

    Include:

  • Sensor (1 pc)
  • Receiver Temperature Cable (1 pc)
  • RPM Cable (1 pc)
  • Motor Mount (1 pc)

    1. Customer Reviews

    2. Displaying 1 to 2 (of 2 reviews)
      Result Pages:  1 

      By Date Added: Thursday 09 April, 2015

      By Date Added: Saturday 09 August, 2014

      Displaying 1 to 2 (of 2 reviews)
      Result Pages:  1 

    Write a Review

    Customers who bought this product also purchased

    Tamiya (50473) Servo Saver high torque type
    Tamiya (50473) Servo Saver high torque type
    USD$6.50USD$5.90
    Yeah Racing (TBT-0007) 3x42mm Titanium Turnbuckle Shafts
    Yeah Racing (TBT-0007) 3x42mm Titanium Turnbuckle Shafts
    USD$7.49
    ABC Hobby 5mm 6mm Extension Body Post White 66210
    ABC Hobby 5mm 6mm Extension Body Post White 66210
    USD$7.10
     
    Tamiya TBEVOIV Flanged Pipe 2 pcs 19804396
    Tamiya TBEVOIV Flanged Pipe 2 pcs 19804396
    USD$5.00
    Traxxas Push Rod Molded Composite Red For 1/16 Slash 7018
    Traxxas Push Rod Molded Composite Red For 1/16 Slash 7018
    USD$6.00USD$4.99
    Tamiya TA07 Aluminum Steering Arm Set 2Pcs Blue For TA07PRO TRF419 TRF419X 54704
    Tamiya TA07 Aluminum Steering Arm Set 2Pcs Blue For TA07PRO TRF419 TRF419X 54704
    USD$17.10
     
    Traxxas Servo Saver with Adaprors for Slash T-Maxx Rustler 3744
    Traxxas Servo Saver with Adaprors for Slash T-Maxx Rustler 3744
    USD$4.00USD$3.49
    3Racing 64 Titanium 3mm Turnbuckle 40mm 2pcs 3RAC-TR340
    3Racing 64 Titanium 3mm Turnbuckle 40mm 2pcs 3RAC-TR340
    USD$4.40
    Yeah Racing (TB-0022) 3X57mm Stainless Steel Turnbuckle (2pcs)
    Yeah Racing (TB-0022) 3X57mm Stainless Steel Turnbuckle (2pcs)
    USD$4.90USD$2.99
     
    Manufacturers
    Top Brands

    rcmart traxxasrcmart rpm

    rcmart 3racingrcmart Speed Passion

    rcmart 3racingrcmart Speed Passion

    rcmart Yeah Racingrcmart Pro-Line

    rcmart Gmade Crawler GS01rcmart Xtra Speed

    rcmart hobby wingrcmart skyrc

    rcmart orcarcmart MST Drift Tire Wheel RC

    rcmart GPMrcmart Xray

    rcmart Team Associatedrcmart orca

    rcmart Tamiyarcmart ABC Hobby Body

    rcmart Novak ESC Motor Comborcmart Jconcepts

    rcmart Flash-Sale-93th-170323

    rcmart Exclusive Special Offer GPM Racing 400 days Warranty








    rcmart Reduced Shipping Save Big weekly deals
    Subscribe
    rcmart crawler Accessories
    rcmart Xpress Xpresso K1 K66
    rcmart 3racing D4 AWD hop up parts
    rcmart 3racing D4 RWD hop up parts
    rcmart Axial yeti hop up parts
    rcmart Gmade GS01 hop up parts
    rcmart Axial SCX10 hop up parts
    rcmart Axial SCX10 hop up parts
    rcmart traxxas e-revo
    rcmart traxxas summit
    rcmart xray t4
    rcmart blog RC NEWS
    Share Product
    Share on Facebook Share on Twitter Share on Digg Share via E-Mail
    tick
    2 items are added to shooping cart
    Order Qunatity:
    Order Total: USD$