MST XXX-D VIP 1/10 4WD Shaft Drift Car Kit 532107 w/ OMG Low Profile Brushless Digital Servo BM07S #CB0819
- MST XXX-D VIP 1/10 Front Motor 4WD EP Shaft Drive Car ARR Red #532107
- OMG High Voltage Low Profile High Speed Brushless Digital Servo 7KG 0.05Sec For RC Drift Car #D2-LP-BM07S
MST XXX-D VIP 1/10 Front Motor 4WD EP Shaft Drive Car ARR Red #532107
The MST XXX-D VIP is our latest chassis and features a huge range of adjustment, and allows a wicked style of driving! NOW UPGRADED TO INCLUDE ALUMINIUM ACKERMAN KNUCKLES FRONT, AND REGULAR ALUMINIUM KNUCKLES REAR!!
*Photos for reference only.
- Unique slide rail steering system
- Real-car simulated brake discs & calipers
- F&R CVD universal shaft set
- Unique quick adjust rail motor mount
- Unique alum stiff connection
- Aluminum oil damper set
- Comes with 1.3 CS gearing as standard!
- Scale: 1/10
- Wheelbase: Standard 257mm (changeability 255mm – 259mm)
- Tread: Standard 186mm (changeability 186mm – 190mm)
- Gear ration: 1.89 ( 34T/18T )
- CS ration: 1.32 ( 40T/16T )
- Drive system: shaft / 4WD
- Damper: Oil damper
- Suspension: A arm (Double wishbone) w/pillowball suspension system
- Steering tie rod: Rail type
- Bearing: Full ball bearings
- Caster: 10, 14 degrees variableness
- Camber: 0 to –12 degrees
- MST XXX-D VIP 1/10 Front Motor 4WD EP Shaft Drive Car ARR (1 Set)
OMG High Voltage Low Profile High Speed Brushless Digital Servo 7KG 0.05Sec For RC Drift Car #D2-LP-BM07S
The HDT045070B servo is a low profile, powerful, accurate ultra speed precision digital servo with its heat sink aluminum case, long wear 7075 Aluminum anodize titanium gears, a precision brushless motor and improved electronics, legendary quality.
It can be capable of 6.0 to 7.4 volt operation.
The HDT045070B takes a whole new galaxy of performance.
RC OMG provide legendary digital precision with higher torque and faster speed servos.
When Buy at rcMart, This Brushless servo are warranted for three years from the date of purchase to be free from manufacturing or component defects. During the warranty period RC OMG will repair or replace (at our discretion) any defective products. Please keep your original order receipt as proof of the date of purchase.
This warranty does not cover abuse, neglect, or damage due to incorrect wiring, over voltage, overloading, misuse, crash damage, improper installation or damages caused by alteration by unauthorized persons.
- For: 1/10 Drift
- Material: Aluminum
- Gears: Long Wear 7075 Aluminum Anodize Titanium
- Super high 12 bit (4096) resolution
- Robust output for superb response in extreme maneuvers
- Zero dead band assures legendary precision
- Aluminum middle case helps dissipate heat
- Digital precision provides great accuracy and performance
- Ball bearing-supported output 25T shaft
- Compatible with all types of Radio system
- Pulse width travel is adjustable
- Type: Digital
- Operating Voltage Range: 6.0-7.4Volts DC
- Bearing Type: Dual Ball Bearings
- Speed (s/6)0°@6.0 /7.4V: 0.06/ 0.05
- Torque oz./in. (6.0V/7.4V): 76/97
- Torque kg./cm. (6.0V/7.4V): 5.5/7
- Dimensions: 40.2mm x 20.1mm x 25.2mm
- Weight: 45g
- Motor Type: Brushless motor
- Control System: +Pulse Width Control 1500usec Neutral
- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Temperature Range(℃): -10° - 50°
- Idle Current (@6.0V/7.4V): 4mA/5mA
- No Load Running Current (6.0V/7.4V): 300mA/400mA
- Stall Current (6.0V/7.4V): 3200m/3900mA
- Dead Band Width: 2µs
- Potentiometer Type: Rotating(Max.220°)
- Connector Wire Length: 11.8 in. / 300 mm.
- Connector Wire Gauge: 25 AWG
- Connector Type: JR
- Gear Type: Titanium Gears
- Frequency: 330Hz
- Shaft: 6mm 25T
- High Voltage Low Profile High Speed Brushless Digital Servo (1 pc)