Phone Order Support: US +1(626)404-7382 | UK +44(020)8133-9382 | HK +(852)2858-6382

  1. Traxxas E-Maxx Brushless RTR w/TQi 2.4GHz, Castle Mamba, Chargers #3908X-Please check 39085/39087 for new version (Discontinued
    [%%% 3908X]

    Our Price:  Low Price: USD$699.90

    Stock: Out of Stock!

    Buy this item and earn 700 points valued at USD$2.80.

    Write a Review
    Quantity:
     

Traxxas E-Maxx Brushless RTR Monster Truck w/TQi 2.4GHz, Castle Mamba, LiPos Chargers #3908X


Description:

E-Maxx Brushless Edition, the Ultimate Electric 4X4 Monster!

Now Includes LiPo Balance Chargers!

This is the Traxxas E-Maxx Brushless Edition Ready-To-Run Montster Truck. The already-loaded E-Maxx Brushless Edition now includes two Power Cell LiPo batteries, two LiPo Balance Chargers, factory installed telemetry sensors, and the TQi transmitter with Docking Base as standard equipment. The two 5000mAh 3-cell LiPos unleash the full fury of the factory-installed and programmed Castle Creations Mamba Monster power system. This heavy-duty setup gives the E-Maxx wheel-lifting torque and brutally quick acceleration on the way to over 65mph—and you can prove it!

Super-Duty Revo driveshafts, Torque-Control slipper clutch, an oversized steel idler gear and rubber-sealed bearings are just a few of the features that make E-Maxx ready for all the horsepower you can handle. The Mamba Monster controller features a cooling fan and heavy-duty construction with oversized 6.5mm connectors, Traxxas High-Current Connectors, and the motor uses a 5mm rotor shaft for added durability. Traxxas’ innovative and secure speed control mount keeps the Mamba Monster controller and on/off switch in place without relying on servo tape.

This E-Maxx arrives Ready-To-Race with all the necessary telemetry sensors installed. Traxxas Link also lets you adjust the TQi’s pro-level features quickly and easily with its intuitive, high-def, touch-screen interface. While you hone performance with Traxxas Link, recharge the Power Cell LiPos with the included LiPo Balance Chargers for a perfect charge every time, no setting or programming required.

Traxxas E-Maxx Brushless RTR Monster Truck w/TQi 2.4GHz, Castle Mamba, LiPos & Chargers #3908L



Traxxas E-Maxx Brushless RTR Monster Truck w/TQi 2.4GHz, Castle Mamba, LiPos & Chargers #3908L



Traxxas E-Maxx Brushless RTR Monster Truck w/TQi 2.4GHz, Castle Mamba, LiPos & Chargers #3908L



Traxxas E-Maxx Brushless RTR Monster Truck w/TQi 2.4GHz, Castle Mamba, LiPos & Chargers #3908L



Traxxas E-Maxx Brushless RTR Monster Truck w/TQi 2.4GHz, Castle Mamba, LiPos & Chargers #3908L



Traxxas E-Maxx Brushless RTR Monster Truck w/TQi 2.4GHz, Castle Mamba, LiPos & Chargers #3908L


Feature:

  • Includes two 2-Cell/3-Cell LiPo Balance Chargers
  • TQi 2.4GHz High Output radio system with Docking Base™
    • TQi 2.4GHz High Output transmitter
    • TQi Docking Base™
    • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, "model selection" is not required Multi-Function knob
    • Adjustable steering and throttle percentage (dual rates)
    • Adjustable steering and throttle sensitivity (exponential)
    • Adjustable steering and throttle end points
    • High 13ms frame rate and near-zero latency for responsive control
    • Telemetry-ready 5-channel micro receiver with dual channel-1 input
    • Docking Base accepts iPhone and iPod touch (sold separately) for full Traxxas Link application functionality
    • Accessory speed, RPM, temperature, and voltage telemetry sensors available separately
    • TQi 2.4GHz 5-channel micro receiver (#6518) with fail-safe security and integrated telemetry ports
  • Adjustable four-position wheelie bar
  • Castle Creations Mamba Monster ESC
    • 6.5mm gold-plated connectors
    • Integrated cooling fan
    • Heavy-duty construction
  • Castle Creations Mamba Monster 2200KV Motor
    • Machined heatsink can
    • 5mm rotor shaft
  • Heavy-duty 17mm splined aluminum hex hubs and wheel nuts
  • Tunable sealed differentials in Maxx® differential housings
    • Backward compatible to all Maxx models
    • Differential uses Revo®-Spec gears and components
  • Revo®-Spec front, rear, and center driveshafts
  • New heavy-duty Brushless Ready™ transmission
    • Over two-times stronger than original E-Maxx transmission
    • Steel idler gear
    • Optional accessory two-speed adjustable ratio gear sets
  • Revo®-Spec Torque-Control™ slipper clutch
  • Quick release battery hold down straps
    • Reversible to accept stick packs and side-by-side packs
    • Available accessory battery strap for oversized battery packs (sold separately)
  • Long wheelbase, low center-of-gravity chassis
    • Increased stability
    • Extended by 30mm
    • Accepts 6-cell or 7-cell flat battery packs and LiPo packs of similar size
    • Batteries sit lower in the chassis for lower CG
    • Lower skid plate protects the center driveline while allowing quick access to the transmission
  • Waterproof high-torque dual steering servos (#2075)
  • Four-channel 2.4GHz micro receiver
    • Two channel-one outputs for dual steering servos (no Y-harness required)
  • Precision hex hardware throughout
  • 6.3" diameter Maxx tires pre-glued on black-chrome Split-Spoke wheels
  • Two-piece gear cover makes it easy to access and change gearing
    • Requires removal of only one screw for access
  • Sealed pivot balls and front/rear outer driveshafts
  • Eight fully-adjustable, coil-over Ultra Shocks
  • Integrated dual servo bellcrank and servo saver
  • Watertight sealed receiver box
  • 100% captured steering and toe linkage
    • Double-shear components capture and secure all rod ends for unmatched durability
    • Rear toe links are captured by a thick tie-bar for double-shear strength
  • Updated shock towers and adjustable body mounts
  • Gray composite components
    • Chassis, skid plates, bulkheads, shock bodies, spur gear cover
  • Precision rubber-sealed ball bearings
  • Blue-anodized aluminum antenna crimp nut
  • Four-position wheelie bar included
  • Fully painted, trimmed, and decaled ProGraphix® body

Vehicle Specification:

  • Length: 571mm
  • Width: 419mm
  • Height: 241mm
  • Weight: 4360g
  • Wheelbase: 335mm
  • Ground Clearance: 101mm
  • Front and Rear Tires (pre-glued): Maxx® (6.3" x 3.8")
  • Front and Rear Wheels: 3.8" Split-Spoke (black chrome)
  • Overall Drive Ratio: 20.88 (stock, out-of-box)
  • Differential Type: Bevel Gear, Sealed, Limited Slip
  • Gear Pitch: 32-Pitch
  • Chassis Structure/Material: Molded Composite Nylon Tub
  • Brake Type: Electronic
  • Drive System: Shaft-Driven 4WD
  • Steering: Bellcrank
  • Top Speed: 35+mph (65+mph w/ two 3S LiPo Batteries)

Include:

  • Traxxas E-Maxx Brushless RTR Monster Truck
  • ESC: Castle Creations Mamba Monster Forward/Reverse/Brake
  • Motor (electric): Castle Creations Mamba Monster 2200KV
  • Transmission: Single-Speed (2nd gear only)
  • Radio System: TQi™ 2.4GHz Radio System with Docking Base
  • Charger: Two Traxxas 2-Cell / 3-Cell LiPo Balance Chargers
  • Decals
  • Instruction

Traxxas Summit Electric 4WD Monster Truck RTR w/TQi 2.4GHz, LiPos & Chargers #5607L


Require:

  • "AA" Batteries for transmitter (4 pcs)
  • (2) 7.4V or 11.1V LiPo batteries, or (2) 8.4V NiMH Batteries & Charger

    Customer Reviews

  1. There are currently no product reviews.

Write a Review

Customers who bought this product also purchased

Traxxas Front/Rear Center Driveshafts 5151R
Traxxas Front/Rear Center Driveshafts 5151R
USD$40.00USD$28.99
Traxxas RPM / Speed Sensor Wire Retainer for E-Maxx Bandit Rustler Stampede Slash 6537
Traxxas RPM / Speed Sensor Wire Retainer for E-Maxx Bandit Rustler Stampede Slash 6537
USD$3.00USD$2.59
Traxxas (3951) Pinion Gear 21T-32P
Traxxas (3951) Pinion Gear 21T-32P
USD$3.50USD$2.99
 
Traxxas (5379X) Differential Ring Gear & Pinion Gear
Traxxas (5379X) Differential Ring Gear & Pinion Gear
USD$15.00USD$12.39
Traxxas Connector Power Tap with Cable & Wire Tie for XO-1 1:7 RC Car 6541
Traxxas Connector Power Tap with Cable & Wire Tie for XO-1 1:7 RC Car 6541
USD$6.00USD$5.40
RPM Bulkhead Braces for Traxxas T/E-Maxx Blue 80155
RPM Bulkhead Braces for Traxxas T/E-Maxx Blue 80155
USD$6.10
 
RPM Skid / Wear Plate Set for Traxxas T-Maxx / E-Maxx 1.5/2.5/2.5R Blue 80115
RPM Skid / Wear Plate Set for Traxxas T-Maxx / E-Maxx 1.5/2.5/2.5R Blue 80115
USD$14.90
Traxxas Telemetry trigger magnet 6540
Traxxas Telemetry trigger magnet 6540
USD$2.00USD$1.80
RPM Front Bumper Blue for Traxxas T-Maxx E-Maxx 80105
RPM Front Bumper Blue for Traxxas T-Maxx E-Maxx 80105
USD$6.10
 
Manufacturers
Top Brands

rcmart traxxasrcmart rpm

rcmart 3racingrcmart Speed Passion

rcmart 3racingrcmart Speed Passion

rcmart Yeah Racingrcmart Pro-Line

rcmart Gmade Crawler GS01rcmart Xtra Speed

rcmart hobby wingrcmart skyrc

rcmart orcarcmart MST Drift Tire Wheel RC

rcmart GPMrcmart Xray

rcmart Team Associatedrcmart orca

rcmart Tamiyarcmart ABC Hobby Body

rcmart Novak ESC Motor Comborcmart Jconcepts

rcmart first-sale-2017

rcmart Flash-Sale-84th-170119

rcmart Exclusive Special Offer GPM Racing 400 days Warranty








rcmart Reduced Shipping Save Big weekly deals
Subscribe
rcmart crawler Accessories
rcmart Xpress Xpresso K1 K66
rcmart 3racing D4 AWD hop up parts
rcmart 3racing D4 RWD hop up parts
rcmart Axial yeti hop up parts
rcmart Gmade GS01 hop up parts
rcmart Axial SCX10 hop up parts
rcmart Axial SCX10 hop up parts
rcmart traxxas e-revo
rcmart traxxas summit
rcmart xray t4
rcmart blog RC NEWS
Share Product
Share on Facebook Share on Twitter Share on Digg Share via E-Mail
tick
2 items are added to shooping cart
Order Qunatity:
Order Total: USD$