Phone Order Support: US +1(626)404-7382 | UK +44(020)8133-9382 | HK +(852)2858-6382

  1. Tekin RSX Sensored Brushless ESC w/ Gen3 Motor 2.5T Combo Set #TT2756

    Our Price:  Price: USD$289.90 USD$465.90
    You Save: $176.00 (38%)

    Stock: 20+

    Buy this item and earn 290 points valued at USD$1.16.

    Write a Review

Tekin RSX Sensored Brushless ESC w/ Gen3 Motor 2.5T Combo Set #TT2756

Combo Included:

  • Tekin RSX Sensored Brushless ESC For 1/10 RC #TT1158
  • Tekin Redline Gen3 Sensored Brushless Motor 2.5T #TT2717

Tekin RSX Sensored Brushless ESC For 1/10 RC #TT1158


This is the Tekin RSX Sensored Brushless Electronic Speed Control. The RSX speed control defines capability and versatility unlike any other electronic speed control on the market. With high-end components utilized throughout, the RSX takes 1/10th scale competition racing to a new level.

Power, control and reliability remain the foundation of this RS-based ESC. Built with a custom high-efficiency aluminum heatsink housing and full on-board programming, the RSX provides the tools for the win! Armed with features, the RSX was designed for modified racing. The aluminum housing and detachable fan shroud system maximize cooling for extreme racing conditions. Capabilities such as datalogging and HotWire EZ Port communication allow you to unlock the full potential of the RSX with extensive tuning and datalog feedback. The high-voltage BEC puts out the power you need for fast, precise steering servo operation. If you're looking for the ultimate ESC in modified racing, the RSX is there for the job.


  • Billet Aluminum Heatsink Housing
  • Optional Fan Shroud System and High Speed Fan for Maximum Cooling
  • Ultra-smooth and Precise Throttle and Braking Control
  • Compatible with Sensored/Sensorless Brushless and Brushed Motors
  • Easily Access Programming, Anywhere, Anytime
  • Datalogging Capability
  • High Voltage Programmable BEC
  • EZ Access HotWire Programming Port
  • HotWire PC Interface for Advanced Programming and Updating
  • D2: Dual Drive Mode Technology
  • On-Board Temperature Indicator
  • HDAC: High Density Copper PCB's
  • Sensor Plug for Precise Commutation with all Motors
  • Gold-plated Solder Posts for Easy Wire Replacement
  • Self Test Diagnostics and Factory Reset
  • Pit Tune Mode
  • DGF2: Digital Glitch Filtering V2
  • QuickTune Programming
  • One-Touch Radio Calibration High Voltage BEC (6.0v/7.4v)*

Programming Features:

  • Drag Brake (13 steps)
  • Brake / Reverse Strength (13 steps)
  • Current Limiter (none + 12 steps)
  • Neutral Width (13 steps)
  • Timing Profiles (5 preset - 2 custom*)
  • Adjustable Throttle and Brake Minimums
  • Custom Throttle Curves
  • Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
  • Voltage Cutoffs (none, 2S, 3S, Custom)
  • Timing Boost and Turbo when used with Hotwire
  • ROAR Race Spec "Blinky" Mode
  • Save, Load and Share custom ESC setup files*
  • Save, Load and Share Data Log files*
  • Extensive Tuning via Tekin HotWire PC Interface

*NOTE: Requires HotWire USB Gen2 Interface (Tekin #TT1451) - Sold Separately


  • Controls: Forward/Brake/Reverse
  • Input Voltage: 4-9 Cells, 2S-3S Lipo
  • BEC: 6.0v / 7.4v 5.5amps
  • Motor Limit Brushless Mode 2S: 2.5 Turn 2-pole, 4lb chassis
  • Motor Limit Brushless Mode 3S: 8.5 Turn 2-pole, 4lb chassis
  • Motor Limit Brushed 2S: 6 Turn, 36mm Can
  • Motor Limit Brushed 3S: 12 Turn, 36mm Can
  • Max Current: 180 Amps per phase
  • Timing Profiles: 7 choices (on board)
  • Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
  • Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
  • Dimensions: 25.4x33x12.9mm
  • Weight: 42g


  • Tekin RSX Sensored Brushless ESC (1 Set)
  • Manual (1 pc)

Tekin Redline Gen3 Sensored Brushless Motor 2.5T #TT2717


Tekin Redline Gen3 Sensored Brushless Motors have been engineered to be smaller, lighter and faster than the previous model. Much more than a re-hash and new look, the GEN3 Redline Sensored Motor is ready for any situation and able to create the speed you need to win. On Road or Off, the GEN3 delivers smooth power across the entire RPM range you’ve come to expect from a Tekin motor.

The GEN3 21.5T, 17.5T and 13.5T are available in an RPM version as well as the standard versions. Designed for applications where higher RPM is more beneficial than torque, these motors are perfect for 1/12 and touring car racing classes. These motors come standard with 12.5mm performance rotors.


  • CNC Machined T 6061 Billet Aluminum Heat Sink Can
  • Neodymium Sintered Magnet
  • Precision Engineered for Maximum Energy Conversion
  • High Purity Copper Windings Maximize Conductivity
  • Low Resistance, High Power Solder Tabs
  • Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems
  • Anodized End-bell plates maximize corrosion and wear resistance
  • High RPM precision bearings
  • Rebuild-able Design
  • Solder-less Sensor PCB replacement
  • Adjustable Timing
  • Standard and RPM versions


  • Input Voltage: 2S
  • Weight: 158g / 5.6oz
  • Shaft Dimensions: 3.2mm (1/8") x 15.3mm
  • Motor Diameter: 35.85mm / 1.40"
  • Motor Length: 48.5mm / 1.909"
  • Bearing Dimensions: Front: 4x13x5mm / Rear: 1/8x3/8x5/32"
  • Rotor Size: 13mm
  • Rebuildable: Yes


  • Tekin Redline Gen3 Sensored Brushless Motor (1 pc)
  • Sensor Cable

    Customer Reviews

  1. There are currently no product reviews.

Write a Review
Top Brands

rcmart traxxasrcmart rpm

rcmart 3racingrcmart Speed Passion

rcmart 3racingrcmart Speed Passion

rcmart Yeah Racingrcmart Pro-Line

rcmart Gmade Crawler GS01rcmart Xtra Speed

rcmart hobby wingrcmart skyrc

rcmart orcarcmart MST Drift Tire Wheel RC

rcmart GPMrcmart Xray

rcmart Team Associatedrcmart orca

rcmart Tamiyarcmart ABC Hobby Body

rcmart Novak ESC Motor Comborcmart Jconcepts

2 items are added to shooping cart
Order Qunatity:
Order Total: USD$