Phone Order Support: US +1(626)404-7382 | UK +44(020)8133-9382 | HK +(852)2858-6382

  1. RPM Front A-Arms Black 2pcs For Team Associated B44.2 B44.1 B44 #73432
    [73432]

    Our Price:  Low Price: USD$8.20

    Stock: 6

    Buy this item and earn 8 points valued at USD$0.03.

    Write a Review
    Quantity:
     

RPM Front A-Arms Black 2pcs For Team Associated B44.2 B44.1 B44 #73432


Description:

This is a pack of two optional RPM Team Associated B44.2 Front A-Arms. When designing the a-arms for the race bred B44 chassis, RPM's first objective was to improve strength and durability without sacrificing rigidity. These design changes still retain the stock suspension geometry yet have been improved structurally to eliminate potential breakage points. RPM also eliminated slop at the hinge pins and caster blocks. The arms included with RPM's box-stock B44.2FT came with hinge pin holes with .005” (.13mm) of clearance in each hinge pin hole! That’s a total of .01” (.26mm) of slop (inside and outside hinge pins combined) before the vehicle ever ran! By tightening up these “loose” areas with RPM A-arms, the B44’s camber, caster and toe angles are locked in place while improving suspension performance and consistency at the same time.

RPM also found that the stock anti-sway bar pivot balls molded in the A-arms are .005” (.13mm) undersized. That leads to inadequate performance of the sway-bar system. RPM solved that by eliminating the molded ball entirely and replaced it with a more stout, machined pivot ball (not included – see “NOTE” below), with closer tolerances on the ball diameter. Each RPM A-arm for the B44 is molded in black and comes with RPM's limited lifetime warranty against breakage. When performance counts and the goal is to get across the finish line, you can count on RPM to get you there!

NOTE: RPM A-arms for the B44 fit the B44, B44.1 & B44.2. Individuals wanting to run a sway bar system must use any standard 4.3mm ball stud such as Associated ASC6276. RPM recommends Associated balls studs for the most consistent diameter, but any 4.3mm ball stud with a 4-40 x ¼” thread will work.


Feature:

  • For: Team Associated B44.2/ B44.1/ B44
  • Material: Nylon
  • Color: Black

Include:

  • RPM Front A-Arms Black (2 pcs)
  • Stock anti-sway bar pivot balls (2 pcs)
  • Manual (1 pc)

    Customer Reviews

  1. There are currently no product reviews.

Write a Review

Customers who bought this product also purchased

RPM Front A-arms for Losi Ten-SCTE, Ten-T & 810 73262
RPM Front A-arms for Losi Ten-SCTE, Ten-T & 810 73262
USD$8.90
SKYRC Gyro GC301 For RC Drift F1 Car SK-600068-01
SKYRC Gyro GC301 For RC Drift F1 Car SK-600068-01
USD$22.50
RPM Mini Front Bumper Black for Team Associated SC10 80232
RPM Mini Front Bumper Black for Team Associated SC10 80232
USD$3.40
 
RPM Rear A arms for Losi Ten-SCTE, Ten-T & 810 73142
RPM Rear A arms for Losi Ten-SCTE, Ten-T & 810 73142
USD$8.80
Tekin Hotwire 2.0 Gen2 USB Interface (Program System) TT1451
Tekin Hotwire 2.0 Gen2 USB Interface (Program System) TT1451
USD$49.00USD$29.90
Tamiya (53644) Aluminum Stabilizer Ends (BU)
Tamiya (53644) Aluminum Stabilizer Ends (BU)
USD$4.70
 
Spec R Spring Steel Out Drive Version 2 for Yokomo SPR020 DBD2L DBD2K DSTMY2 SPR020-SC2
Spec R Spring Steel Out Drive Version 2 for Yokomo SPR020 DBD2L DBD2K DSTMY2 SPR020-SC2
USD$10.80
Tamiya TRF419 Rear Damper Stay 51572
Tamiya TRF419 Rear Damper Stay 51572
USD$10.50
Kawada 48P 24T Steel Pinion Gear PNC524
Kawada 48P 24T Steel Pinion Gear PNC524
USD$5.90
 
Manufacturers
Top Brands

rcmart traxxasrcmart rpm

rcmart 3racingrcmart Speed Passion

rcmart 3racingrcmart Speed Passion

rcmart Yeah Racingrcmart Pro-Line

rcmart Gmade Crawler GS01rcmart Xtra Speed

rcmart hobby wingrcmart skyrc

rcmart orcarcmart MST Drift Tire Wheel RC

rcmart GPMrcmart Xray

rcmart Team Associatedrcmart orca

rcmart Tamiyarcmart ABC Hobby Body

rcmart Novak ESC Motor Comborcmart Jconcepts

tick
2 items are added to shooping cart
Order Qunatity:
Order Total: USD$