Phone Order Support: US +1(626)404-7382 | UK +44(020)8133-9382 | HK +(852)2858-6382

  1. RPM Front A-Arms Black 2pcs For Team Associated B44.2 B44.1 B44 #73432
    [73432]

    Our Price:  Low Price: USD$8.20

    Stock: 5

    Buy this item and earn 8 points valued at USD$0.03.

    Write a Review
    Quantity:
     

RPM Front A-Arms Black 2pcs For Team Associated B44.2 B44.1 B44 #73432


Description:

This is a pack of two optional RPM Team Associated B44.2 Front A-Arms. When designing the a-arms for the race bred B44 chassis, RPM's first objective was to improve strength and durability without sacrificing rigidity. These design changes still retain the stock suspension geometry yet have been improved structurally to eliminate potential breakage points. RPM also eliminated slop at the hinge pins and caster blocks. The arms included with RPM's box-stock B44.2FT came with hinge pin holes with .005” (.13mm) of clearance in each hinge pin hole! That’s a total of .01” (.26mm) of slop (inside and outside hinge pins combined) before the vehicle ever ran! By tightening up these “loose” areas with RPM A-arms, the B44’s camber, caster and toe angles are locked in place while improving suspension performance and consistency at the same time.

RPM also found that the stock anti-sway bar pivot balls molded in the A-arms are .005” (.13mm) undersized. That leads to inadequate performance of the sway-bar system. RPM solved that by eliminating the molded ball entirely and replaced it with a more stout, machined pivot ball (not included – see “NOTE” below), with closer tolerances on the ball diameter. Each RPM A-arm for the B44 is molded in black and comes with RPM's limited lifetime warranty against breakage. When performance counts and the goal is to get across the finish line, you can count on RPM to get you there!

NOTE: RPM A-arms for the B44 fit the B44, B44.1 & B44.2. Individuals wanting to run a sway bar system must use any standard 4.3mm ball stud such as Associated ASC6276. RPM recommends Associated balls studs for the most consistent diameter, but any 4.3mm ball stud with a 4-40 x ¼” thread will work.


Feature:

  • For: Team Associated B44.2/ B44.1/ B44
  • Material: Nylon
  • Color: Black

Include:

  • RPM Front A-Arms Black (2 pcs)
  • Stock anti-sway bar pivot balls (2 pcs)
  • Manual (1 pc)

    Customer Reviews

  1. There are currently no product reviews.

Write a Review

Customers who bought this product also purchased

Team Associated RC10 B44 FT Aluminum 12mm Hex Front Axle Drive Hex ASS-9955
Team Associated RC10 B44 FT Aluminum 12mm Hex Front Axle Drive Hex ASS-9955
USD$7.99
PROTOform PFR18 Light Weight Clear Body For 1/8 On-Road 1530-30
PROTOform PFR18 Light Weight Clear Body For 1/8 On-Road 1530-30
USD$35.16USD$13.90
TBR T-Bone Racing Nylon Rear Bumper Black For Team Associated B64 B64D 11164 
TBR T-Bone Racing Nylon Rear Bumper Black For Team Associated B64 B64D 11164 
USD$8.99
 
HobbyPro (H39) 1:10 On Road Tire For Buggy (F)
HobbyPro (H39) 1:10 On Road Tire For Buggy (F)
USD$8.60
RPM Front A-arms Set For Team Associated B64 B64D 73502
RPM Front A-arms Set For Team Associated B64 B64D 73502
USD$8.85
HobbyPro (H40) 1:10 On Road Tire For Buggy (R)
HobbyPro (H40) 1:10 On Road Tire For Buggy (R)
USD$8.60
 
RPM Rear A-arms Set For Team Associated B64 B64D 73822
RPM Rear A-arms Set For Team Associated B64 B64D 73822
USD$8.85
Tamiya M05 Ver.II Chassis A Parts 54605
Tamiya M05 Ver.II Chassis A Parts 54605
USD$9.50
Tamiya Masking Tape w/ Plastic Sheeting 550mm 87164
Tamiya Masking Tape w/ Plastic Sheeting 550mm 87164
USD$5.60
 
Manufacturers
Top Brands

rcmart traxxasrcmart Speed Passion

rcmart 3racingrcmart Speed Passion

rcmart 3racingrcmart samix

rcmart Yeah Racingrcmart Pro-Line

rcmart Wrap Up Nextrcmart rpm

rcmart Gmade Crawler GS01rcmart Xtra Speed

rcmart hobby wingrcmart skyrc

rcmart orcarcmart MST Drift Tire Wheel RC

rcmart GPMrcmart Xray

rcmart Team Associatedrcmart Holmes Hobbies

rcmart Tamiyarcmart ABC Hobby Body

rcmart TBR T-Bone Racingrcmart Jconcepts

tick
2 items are added to shooping cart
Order Qunatity:
Order Total: USD$