Tamiya TGX 18.540 4x2 XLX Red 1/14 EP Truck ARTR Combo #CB2022 [CB2022]
Our Price: Price: USD$334.25USD$381.50
You Save: $47.25 (12%)
Buy this item and earn 334 points valued at USD$1.34.
Tamiya TGX 18.540 4x2 XLX Red 1/14 EP Truck ARTR Combo #CB2022
RadioLink 6ch Radio Control Transmitter w/ R7EH 7CH Receiver For Tractor Truck (Car Version)#T6EHP-E (1 pc)
ob1 RC V3.1M LED Light System For 1/14 Tamiya Tractor Truck #BL-V3.1M (1 pc)
Tamiya 1/14 TGX 18.540 4x2 XLX Red EP Trucks Kit #56332 (1 pc)
Power HD High Speed Metal Gear Analog Servo For 1:10 Touring Drift RC Car #HD-6001MG (2 pcs)
Tamiya 1/14 TGX 18.540 4x2 XLX Red EP Trucks Kit #56332
This special edition of the 1/14 R/C MAN TGX 18.540 4x2 XLX assembly kit comes with body components which are pre-painted in TS-39 Mica Red. A clear urethane topcoat is applied to ensure the finish resists scuffs and remains durable.
RadioLink 6ch Radio Control Transmitter w/ R7EH 7CH Receiver For Tractor Truck #T6EHP-E
This is RadioLink 6ch Radio Control Transmitter w/ R7EH 7CH Receiver For Tractor Truck.
1） Transmitter hops spectrum while powering on: Transmitter will detect whether the current spectrum channel was occupied when its power on, and it will hop to the next one until where its not occupied. The receiver will search and match with the transmitter which has the same identity code.
2） Code matches wirelessly: Each transmitter has an unique identity code of its own, the receiver will search and bind with the nearest transmitter when press the code matching button on it. There is no need to match again in future use once its matching successfully.
3） High anti-interference capability: Adopt FHSS technology makes our products have excellent anti-interference capability. And helps the models always be in control easily.
4） High suppression ratio of Adjacent Channels
5） Fully comply with FCC&CE standards
6） Stable RF range: With FHSS technology, its control range reaches 400 meters on ground and 800 meters in air.
7） Flexible throttle hand change
8） LCD screen, manual programming is enable. Including settings about D/R, SERVO REVERSING, EXPO, EPA, TRIM, N-TH, N-PI, I-TH, I-PI, GYRO, SWSH and etc.
9） Low voltage warning function
10）Trainer cable, power charging jack.
Transmitting on 2.4G band
Power supply: 9.6V Ni-Cd battery or 12V alkaline battery
Current drain: 87mA(Energy Saving)
R6F narrow band, 2.4GHZ 6 channel receiver
Power requirement: 4.8V~6V
Current drain: 9.5mA & 4.8V
1. Channel: 7CH
2. Max input voltage: 5.5V
3. Size: L×W×H: 50×24×15 Weight: 11.4g
4. Current: 19-25mA (voltage 5V)
RadioLink 6ch Radio Control Transmitter (1 pc)
R7EH 7CH Receiver (1 pc)
ob1 RC V3.1M LED Light System For 1/14 Tamiya Tractor Truck #BL-V3.1M
Light up your tractor with this light set from ob1 RC, featuring front amp, brake lamp, Aux lamp, fog lamp, roof lamp, reverse lamp, left and right signal lights.
Included are 6 LED cables, the main unit supports up to 12 LED cables.
*Photos for reference only.
CH1 - Steering
Left / Right blinker lamp
CH2 - Throttle
2-level brightness brake lamp
Auto hazard lamp
CH3 - ON/ OFF
Manual hazard lamp
Flash mode Toggle
Front / FOG/ ROF lamps On/ Off
CH4 - Toggle
Toggle function (Hold for 3 sec. to change LED status, total 4 Toggle steps !)
Support legs position detection
Input Voltage: 5-6VDC (Powered by BEC), absolute Max. 9V
Low Voltage Detection battery type: 1-6S LiPo / LiFePo / User define Max. 25.2V (V3.1M)
Support RC Modulation: High Response 2.4G system / PCM / PPM (FM) / AM (V3.1M)