Phone Order Support: US +1(626)404-7382 | UK +44(020)8133-9382 | HK +(852)2858-6382

  1. Tamiya (#58506) 1:10 TA06 Ferrari 599XX W/ESC EP

    Our Price:  Low Price: USD$219.90

    Stock: Out of Stock!

    Buy this item and earn 220 points valued at USD$0.88.

    Write a Review

Tamiya 1:10 TA06 Ferrari 599XX W/ESC EP


  • Tamiya started the modern touring car standard with the TA-01, which was first released in 1992. This 6th generation Tamiya 4WD touring car chassis kit places a focus on optimum weight distribution when paired with brushless motors and light weight batteries. This new generation 4WD machine was also created using input from the World Championship TRF team. The battery pack and motor are positioned along the centerline of the slim monocoque frame and the Dual-Drive system features belt-driven front and gear-driven rear wheels to provide efficient, yet sharp power transfer. The front suspension can be assembled as an IFS setup with inboard dampers and rocker arms optimized for short reversible suspension arms or a standard outboard damper set up. By using the IFS layout in the front you are able to use Tamiya sports car and touring car body sets with low slung noses. With front and rear gear differential units also included, this chassis offers more customization possibilities and an extended maintenance cycle. The body mounted on this standard spec TA-06 is the Ferrari 599XX. In 2009, Ferrari unveiled the 599XX, an extreme circuit-only machine incorporating a number of innovative technologies taken from Ferrari's racing experience. This machine featured exceptional performance as well as advanced electronics to help the driver record the best lap times possible on the track. It also featured extensive use of carbon-fiber material as well as a 5,999cc V12 DOHC engine capable of 700 Horse power/9,000rpm matched with a 6-speed manual transmission. It had a stylish, aerodynamic body and the "ACTIFLOW" system which controlled airflow around the machine to provide increased down-force without extra drag.

  • Feature:

  • Independent double whish bone suspension system
  • 4WD drive train, dual drive which incorporates a two belt system and a rear drive diff and idler gear set up for maximum acceleration
  • CVA plastic shock unit oil dampers included
  • Front shocks may be set up as ISF (Inboard Front Suspension) or as traditional stand up
  • Dual Drive Belts (174mm, 453mm)
  • Stamped Aluminum Motor Plate
  • Full Ball Bearings included
  • Johnson/Mabuchi 540-J brushed motor not included
  • Threaded Turnbuckle Shafts
  • The motor is installed at the mid-rear position which helps improve traction for the rear wheels
  • Front and rear gearboxes are equipped with newly designed gear diff units to efficiently transmit the motor�s power and offer the best traction and acceleration
  • Compatible with most TA05 and TA06 touring car and sports car body sets
  • Suspension parts from the previous TA-05 Version 2 platform are used on the new TA-06. (short reversible suspension, steering blocks, castor blocks and optional aluminum suspension mounts) are all transferable
  • Molded plastic parts are made of durable FRP (Fiberglass Reinforced Plastic)
  • Chassis battery compartment compatible with NiCd, NiMh, LiFe and LiPo battery technologies
  • Battery pack may be accessed via an access hatch on the underside of the chassis
  • Battery is positioned down the center-line of the TA-06 chassis for minimal chassis role during hard cornering
  • Includes medium-narrow slick tires and medium narrow 18-spoke wheels (24mm)
  • Note: Radio gear, battery, charger and ESC (electronic speed control) are required and available separately

  • Specification:

  • Length: 452 mm
  • Width: 191 mm
  • Height: 126 mm

  • Include:

  • Tamiya 1:10 TA06 Ferrari 599XX W/ESC EP (1 set)
  • Wheels and Tires (4 pcs)
  • Full Ball Bearings (1 set)
  • Ferrari 599XX Clean Body (1 pc)

  • Require:

  • ESC
  • Motor
  • Radio: 2-Channel (1 pc)
  • Servo For 1:10 (1 pc) Size around 40.4 x 19.8 x 36mm
  • Battery: Sub-C 6-cells or Li-Po 2Cells Stick Packs with standard Tamiya connector
  • Charger for car battery: For Ni-Mh Sub-C/ Li-Po 2Cells Stick Packs
  • Paint: PS for Polycarbonate/TS for ABS

  • ta06

      Customer Reviews

    1. There are currently no product reviews.

    Write a Review

    Customers who bought this product also purchased

    Tamiya (54315) TA06 Heat Sink Motor Plate
    Tamiya (54315) TA06 Heat Sink Motor Plate
    Tamiya (54232) M3 X 0.5mm Tread Forming Tap
    Tamiya (54232) M3 X 0.5mm Tread Forming Tap
    Hobbywing (Combo-A1) EZrun Brushless Sensorless 18A-SL-H (Version 2.0) +12T Motor (KV 7800)+Programcard Combo Set (FREE SHIP)
    Hobbywing (Combo-A1) EZrun Brushless Sensorless 18A-SL-H (Version 2.0) +12T Motor (KV 7800)+Programcard Combo Set (FREE SHIP)
    Top Brands

    rcmart traxxasrcmart rpm

    rcmart 3racingrcmart Speed Passion

    rcmart 3racingrcmart Speed Passion

    rcmart Yeah Racingrcmart Pro-Line

    rcmart Gmade Crawler GS01rcmart Xtra Speed

    rcmart hobby wingrcmart skyrc

    rcmart orcarcmart MST Drift Tire Wheel RC

    rcmart GPMrcmart Xray

    rcmart Team Associatedrcmart orca

    rcmart Tamiyarcmart ABC Hobby Body

    rcmart Novak ESC Motor Comborcmart Jconcepts

    rcmart 15-anniversary-puzzle

    rcmart Throwback-Sale-161020

    rcmart Exclusive Special Offer GPM Racing 400 days Warranty

    rcmart Reduced Shipping Save Big weekly deals
    rcmart crawler Accessories
    rcmart Xpress Xpresso K1 K66
    rcmart 3racing D4 AWD hop up parts
    rcmart 3racing D4 RWD hop up parts
    rcmart Axial yeti hop up parts
    rcmart Gmade GS01 hop up parts
    rcmart Axial SCX10 hop up parts
    rcmart Axial SCX10 hop up parts
    rcmart traxxas e-revo
    rcmart traxxas summit
    rcmart xray t4
    rcmart blog RC NEWS
    Share Product
    Share on Facebook Share on Twitter Share on Digg Share via E-Mail
    2 items are added to shooping cart
    Order Qunatity:
    Order Total: USD$