Spec R S2 1/10 Touring Car Kit EP SPR-S2STC w/ ESC 13T Motor 25T Pinion Gear Combo Set #CB0903
- Spec R S2 1/10 Touring Racing Car Kit EP #SPR-S2STC
- Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC #ESC-1060WP
- Yeah Racing Hackmoto V2 13T 540 Brushed Motor #MT-0012
- Yeah Racing Aluminum 7075 Hard Coated Motor Gear/Pinions 48 Pitch 25 Teeth #MG-48025
Spec R S2 1/10 Touring Racing Car Kit EP #SPR-S2STC
This is Spec R S2 1/10 Electric Touring Car.
- High strength and high precision anodized alloy parts for added durability and style
- Narrow chassis design with high quality fiber 2.5mm main chassis; 2.0mm upper deck and 3.0mm shock towers.
- Slimmer transmission/motor mount components and design for improved handling and smoothness
- Dual bellcrank steering for precise cornering performance
- Lightweight and smooth HD rear gear differential is included
- Enhanced acceleration from the use of lightest transmission components
- Improved material and stronger plastic parts(with carbon)
- Metal oil shocks parts with plastic shock body for best performance
- Balanced chassis design
- Internal gear reatio 1:1.9
- Spec R S2 1/10 Touring Racing Car Kit EP (1 Set)
Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC #ESC-1060WP
After the revolutionary Hacktronic ESC introduction, Yeah Racing is now introducing the almighty Tritronic 1/10 Waterproof Brushed 60A Electronic Speed Controller ESC. It is water-proof & dust-proof, making it almighty to race under all weather condition. It has 3 running modles compatible to various vehicles and multiple protections in case of low voltage, over-heating or Throttle signal loss.
- For: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
- Water-proof and dust-proof, suitable for all-weather condition races.
- Small size with built-in capacitor module.
- Fwd/Rev/Br running mode fits for various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).
- Great current endurance capability.
- Great built-in BEC output capacity.
- Automatic throttle range calibration, easy to use.
- Easy to set the ESC parameters with jumpers.
- Multiple protections: Low voltage cut-off protection for battery / Over-heat protection / Throttle signal loss protection.
- Model: ESC-1060WP
- Fwd. Cont. / Peak Current: 60A /360A
- Rev. Cont. / Peak Current: 30A /180A
- Voltage Range: 2-3S Lipo or 5-9 NiMH
- Cars Applicable: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
- 2S Lipo or 6 NiMH
- 540 or 550 Size Motor: ≥12T Or RPM<30000 @7.2V
- 3S Lipo or 9 NiMH
- 540 or 550 Size Motor: ≥18T Or RPM< 20000 @7.2V
- 4S Lipo or 12 NiMH
- Resistance: Fwd 0.001Ω, Rev 0.002Ω
- BEC Output: 2A/5V (Linear Mode)
- PWM Frequency: 1KHz
- Dimension / Weight: 36.5*32*18 / 39g
- Cooling Fan: Without cooling fan
- Running Modes: Forward/Reverse/Brake, Forward/Brake, Forward/Reverse
- Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC (1 Set)
- Manual (1 pc)
Yeah Racing Hackmoto V2 13T 540 Brushed Motor #MT-0012
This Yeah Racing Hackmoto V2 Modified brushed motor series are high performance 540 motors designed exqusitivly for competitive RC usage.
Hackmoto V2 featured premium quality material with high strength magnets for unmatched brushed motor speed and torque. Beside of its performance, the motor featured direct-solder wiring tabs for flexible soldering options. It is also designed to be rebuildable with an easily accessible commutator and replaceable brushes and springs. The motor also adapted dual-ball bearings design yields better performance, allowing a smooth ride, precise control with best possible efficiency.
- Size: 540
- For: 1/10 RC Car
- Color: Black
- Rebuildable with an easily accessible commutator and replaceable brushes and springs
- High strength magnets for unmatched brush-motor performance
- Specifically designed for R/C vehicles that require precise movement control
- Excellent torque and long-run times
- Direct-Solder Wiring Tabs for flexible soldering options
- Dual-ball Bearings Design
- Length: 70mm
- Width: 36mm
- Shaft: 3mm
- Turn: 13
- Input Voltage: 7.4v
- Max. Input Voltage: 11.1V
- Shaft Length: 13mm
- Yeah Racing Hackmoto V2 13T 540 Brushed Motor (1 pc)
Yeah Racing (#MG-48025) Aluminum 7075 Hard Coated Motor Gear/Pinions 48 Pitch 25 Teeth
The motor gear series including 2 major types of Pitch Pinion - the 48 Pitch Pinion and the 64 Pitch Pinion. The 48 Pitch Pinion available from 15 teeth to 38 teeth. The 64 Pitch Pinion available from 17 teeth to 52 teeth. The Yeah Racing Aluminum Motor Gear are made by 7075 high quality aluminum with titanium coated surface.
For: 1:10 EP, fit on 540 Motor
Material: 7075 Aluminum
48 Pitch Pinion 25 Teeth (1 Pc)
Set Screw (1 pc)
How to calculate Final Gear Ratio?
For example, if your car has the following setting:
Motor Gear: 25
Spur Gear: 84
Gear Differential: 38
Firstly, we need to calculate the 'Motor Gear to Spur Gear Ratio', divide 84 by 25 equal to 3.36. Then we need to calculate the 'Pulley to Gear Differential Ratio', divide 38 by 19 equal to 2. Finally, the 'Final Gear Ratio' is 3.36 x 2 = 6.72.
Motor Turn used based on Final Gear Ratio:
The above guideline is for reference only. The recommended motor turn may vary depending on different brands. More information can be found on motors' official websites.