SKYRC D100 AC/DC Dual Balance 10A Charger / 5A Discharger (EU PLUG) #SK-100089-02
Our Price: Low Price: USD$84.00
Stock: Out of Stock!
Buy this item and earn 84 points valued at USD$0.34.
SKYRC D100 AC/DC Dual Balance 10A Charger / 5A Discharger #SK-100089-02
SKYRC D100 is a twin-channel charger with two independent circuits which can charge two different kinds of batteries simultaneously. It also supports power distribution in AC mode to get max charging power to shorten charging time. What's more, users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade. Besides that, users could also use it as Lithium Battery Meter and Battery Internal Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use.
*Photos for reference only.
- Lithium Battery Balancer
SKYRC D100 employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.
- Maximum Safety
Automatic Charging Current Limit / Capacity Limit / Temperature Threshold / Processing Time Limit
- Program Data Store/Load
The charger can store up to 10 different charge /discharge profiles for each channel. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.
- Battery Meter
The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage by this charger.
- Battery Resistance Meter
The user can check battery's total internal resistance and each cell's internal resistance.
- PC Control
The user can monitor pack voltage, cell voltage and other data during the charging, view charge date in realtime graphs, and can also control charging and update firmware from "Charge Master".
- Terminal Voltage Control
The charger allows user to change the end voltage. (for expert user only)
- Length: 163mm
- Width: 153mm
- Height: 72mm
- Net Weight: 975g
- Input Voltage: AC100-240V / DC 11-18V
- Charge Circuit Power: DC Input 2 x 100W
- AC Input 100W (Support Power Distribution)
- Discharge Circuit Power: 2 x 10W
- Charger Current Range: 0.1-10A
- Discharge Current Range: 0.1-5A
- Current Drian for Balancing Port: Max 200mA/cell
- Trickle Charging Current: 30mA-300mA & OFF
- LiPo/LiFe/Lilon/LiHV Battery Cell Count: 1-6S
- NiMH/NiCd Battery Cell Count: 1-15S
- Pb Battery Voltage: 2-20V
The user can monitor pack voltage, cell voltage and other data during the charging, view charge data in realtime graphs, and can also control charging and update firmware from "Charge Master".
Finally, Your Charger Gets Its Own App
Smart Phone Control via Wi-Fi Module (both iOS and Android) This charger can be controlled and operated by smart phones via Wi-Fi module (optional part SK-600075).
- SKYRC D100 AC/DC Dual Balance Charger / Discharger (1 Set)