Phone Order Support: US +1(626)404-7382 | UK +44(020)8133-9382 | HK +(852)2858-6382

  1. Serpent S120 PRO 1/12 2WD Pan Car Kit EP #410007
    [410007]

    Our Price:  Price: USD$293.00 USD$332.90
    You Save: $39.90 (12%)

    Stock: 3

    Buy this item and earn 293 points valued at USD$1.17.

    Write a Review
    Quantity:
     

Serpent S120 PRO 1/12 2WD Pan Car Kit EP #410007


Description:

This is Serpent S120 PRO 1/12 2WD Pan Car Kit EP. The S120 pro is a revolutionary innovative 1/12th scale car design based on the F110 SF4. New innovative design for the rear pod with side bearings in linear guides replacing the sidelinks. With a traditional sidelink design, designers use long side links to have the relative roll movement between pod and chassis as linear as possible. But no matter how long the links are, there is always a longitudinal component in the roll motion. With the new side-bearing design, the roll motion is completely linear and independent thus the cornering is completely independent from accelerating or braking. While it doesn’t change much on the mid corner handling of the car, this gives an unprecedented consistency and stability at corner entry when the braking and steering input overlaps and at corner exit when the throttle is applied before the steering is completely straight. What you feel is, you can brake harder into the corners and accelerate earlier out of corners. Lipo longitudinal or Lipo transversal with narrow chassis design. The new side bearing design opens the possibility to use both inline. And cross lipo orientation while keeping a narrow chassis design. Special holders for inline lipo configuration included in the kit, optional for lipo cross configuration. Full strength topdeck to prevent longitudinal flex and keep torsional flex on a reasonable level. 2 body mount positions are included. It does not need to be removed to exchange the lipo in any configuration. 1-screw Lipo mount in all lipo orientations. For the inline lipo orientation, the lipo is held by an aluminium holder that can be removed though the chassis bottom. For the transversal lipo orientation, the lipo can be pulled through the side. This is possible thanks to the no-link design. No more excuses not to charge the lipo in the car. The easy to work on and strong front suspension from the F110 SF4 is evolved for the pancar specific demands. All screws are easily accessible. Double short tube system for the rear roll damping. Compared to a single tube design, it gives a 100% symmetric driving feel. The tubes also work as roll limiter, which reduces the risk of dirt getting into the tubes or oil leaking out from them. New ultra-low center of gravity rear pod. The angled rear plate gives torsional stiffness, protecting the rear shaft and bearings, while keeping all masses low in the pod. This increases rear grip of the car, and preventing grip roll in high grip conditions. The carbon shaft is reinforced by an aluminium sleve at the bearing and where the pin connects the aluminium thread insert with the shaft. This makes the shaft one of the strongest on the market. With the bigger (8mm) bearing on the right side also helps with the higher load of the right side bearing because of the bigger leverage and the spur gear. The thread insert goes all through the shaft until the pin, so the tension force of the thread does not pull on the gluing. New improved shocks, much easier to build, with same, bigger piston diameter as the Project 4X, and the Project 4X bleeding hole for easy rebound adjustment.

After the huge success of the F110 SF4, The step to develop a 1/12th scale car on the same platform was logical. The focus was to make the car easy to work on and durable without sacrificing performance. We proudly present another Masterpiece of innovation and performance. Enjoy the assembly and feel the difference at the racetrack.


Serpent S120 PRO 1/12 2WD Pan Car Kit EP #410007


Serpent S120 PRO 1/12 2WD Pan Car Kit EP #410007


Serpent S120 PRO 1/12 2WD Pan Car Kit EP #410007


Serpent S120 PRO 1/12 2WD Pan Car Kit EP #410007


Serpent S120 PRO 1/12 2WD Pan Car Kit EP #410007


Serpent S120 PRO 1/12 2WD Pan Car Kit EP #410007


Serpent S120 PRO 1/12 2WD Pan Car Kit EP #410007


Serpent S120 PRO 1/12 2WD Pan Car Kit EP #410007


Serpent S120 PRO 1/12 2WD Pan Car Kit EP #410007


Serpent S120 PRO 1/12 2WD Pan Car Kit EP #410007


Serpent S120 PRO 1/12 2WD Pan Car Kit EP #410007


*Photos for reference only.


Specification:

  • Trackwidth: Front 168mm Trackwidth Rear 169.5mm (adjustable with shims)
  • Wheelbase: 202mm
  • Rear adjustable range: +2mm (shims)
  • Front adjustable range: +3mm (inserts in 0.6mm steps)

Include:

  • Serpent S120 PRO 1/12 2WD Pan Car Kit EP (1 pc)

Require:

  • 2.4GHz Radio System
  • Motor & ESC
  • Steering Servo
  • Tires & CA Glue
  • Body & Polycarbonate Paint
  • LiPo Battery
  • Compatible Battery Charger

    Customer Reviews

  1. There are currently no product reviews.

Write a Review

Customers who bought this product also purchased

Yeah Racing 4mm Aluminium Wheel Flange Lock Nut 4pcs For RC Car Orange YA-0448OR
Yeah Racing 4mm Aluminium Wheel Flange Lock Nut 4pcs For RC Car Orange YA-0448OR
USD$4.20
Yeah Racing (LN-M4S-RD) 4mm Aluminium Serrated Lock Nut 10pcs (RD)
Yeah Racing (LN-M4S-RD) 4mm Aluminium Serrated Lock Nut 10pcs (RD)
USD$4.90USD$3.99
Yeah Racing 4mm Aluminium Serrated Lock Nut 10pcs (OR) LN-M4S-OR
Yeah Racing 4mm Aluminium Serrated Lock Nut 10pcs (OR) LN-M4S-OR
USD$4.90USD$3.99
 
AXON DTS Spur Gear 64P 84T GS-D6-084
AXON DTS Spur Gear 64P 84T GS-D6-084
USD$4.75
Xray Composite Ball Joint 5mm Short Open for T2 T3 T4 XB4 XR-303454
Xray Composite Ball Joint 5mm Short Open for T2 T3 T4 XB4 XR-303454
USD$4.30
Yeah Racing (MG-64045) Aluminum 7075 Hard Coated Motor Gear/Pinions 64P 45T
Yeah Racing (MG-64045) Aluminum 7075 Hard Coated Motor Gear/Pinions 64P 45T
USD$4.90USD$3.90
 
Manufacturers
Top Brands

rcmart traxxasrcmart Speed Passion

rcmart 3racingrcmart Speed Passion

rcmart 3racingrcmart samix

rcmart Yeah Racingrcmart Pro-Line

rcmart Wrap Up Nextrcmart rpm

rcmart Gmade Crawler GS01rcmart Xtra Speed

rcmart hobby wingrcmart skyrc

rcmart orcarcmart MST Drift Tire Wheel RC

rcmart GPMrcmart Xray

rcmart Team Associatedrcmart Holmes Hobbies

rcmart Tamiyarcmart ABC Hobby Body

rcmart TBR T-Bone Racingrcmart Jconcepts

rcmart Matrixrcmart Onisiki

tick
2 items are added to shooping cart
Order Qunatity:
Order Total: USD$