3Racing Sakura Ultimate 1/10 RC Touring Car #KIT-SAKURAUL
Replacing the successful Sakura XI and XI DH, comes the all new Sakura Ultimate featuring all that we've learned in the past 2 years resulting in a completely redesigned race platform which to the untrained eye may seem similar to the previous Sakura while it is not.
Our focus has been on improvements in the production process, material engineering, reduction in maintenance time and frequencies, suspension geometry, flex symmetry and weight distribution.
Sakura Ultimate will redefine the meaning of performance in an affordable package.
Floating Servo Mount
All new machined 7075 Alum Floating servo mount ensures symmetric side to side chassis flex and minimizes any risk of chassis tweak.
Factory Racing Products Gear Differential
ll new ultra smooth Factory Racing Products Gear Differential featuring redesigned production molds for all components, all new materials, hard coated alum outer joints.
All new Front End Components
All new steering crank featuring a smoother initial steering response.
Front Anti Roll bar joints are now tweak adjustable.
Front upper camber link features our unique fine tune adjustment just like the Sakura XI.
Anti Roll Bar Joints
Rear Anti Roll Bar joints features tweak adjustable ball ends.
Composite Front Spool
Composite Front Spool with replacable Joint Cups.
Titanium Turnbuckles all round.
Redesigned suspension components and new materials.
SSK Front Driveshafts now standard for maximum on power front wheel traction when used with a spool.
Factory Racing Products Dampers
New Factory Racing Products Dampers featuring 7075 Alum Threaded Shock Body, Hard and PTFE Coated for maximum durability and smoothness.
Hex Shaped Spring Preload Adjustment Nut for easier handling.
Out Board Toe Rear Hubs
New rear uprights/hubs with outboard Toe-In something we found to be superior in adaptability under most conditions.
Center Front Body Support
Standard on the Sakura Ultimate, the Center Front Body Support ensures those lightweight bodies will hold shape at high speeds maximizing its aerodynamic properties.
Anti Roll Bar Mounts
New front and rear Anti Roll Bar Mounts features a positioning system preventing unwanted roll bar shifings and maintains consistency throughout each run.
Motor Mount and Fan Mount for 30 and 40mm cooling fans
New Low CG 7075 Alum Motor Mount featuring a center mounted front leg to ensure symmetric side to side chassis flex.
New Chassis Integrated fan mount for 30 and 40mm cooling fans.
Imported Bando Belts front and rear.
Front Belt Stabilizer
Adjustable upper chassis mounted front belt stabilizer ensures smoothest belt operation and eliminates belt skipping under heavy braking.
Composite Adjustable Battery Mounts with Velcro Battery Straps
New Composite Adjustable Battery Mounts with Precision Positioning System from the Sakura Ultimate, simply adjust battery position by adding or removing spacers on 4 positioning points to ensure perfect chassis side to side balance each time.
Velcro Battery Strap eliminates the use of Fiber Tape.
Ultra Fit Composite Servo Horn
New servo horn built with a more rigid material ensures accurate steering input and eliminates any unwanted slop.
* Photos for reference only.
- New Front A Arms with Revised geometry and materials.
- New Dual Bellcrank Steering System with Revised Ackermann geometry.
- Standard Front SSK Driveshafts for smoothest power delivery to front wheels.
- New Rear A Arms with Revised geometry, materials and reinforcing ribs.
- New Rear Hubs/Uprights with outboard Toe-In.
- Symmetric Front and Rear wheel axle height.
- Front and Rear Anti Roll Bar tweak adjustments.
- Dual Rear Anti Roll Bar Ball Cap mounting positions on A Arm.
- Hex Shaped Shock Spring Tensioner/Ride Height Adjusters for easier grip.
- One piece center mount over hanging servo mount.
- Center Front Body Support for lightweight bodies.
- 5x10 Oversized Center Layshaft Bearings.
- Hard Coated Alum 20T Center Belt Pulleys.
- One piece Machined Spur Adaptor.
- New 40T Differential Pulleys.
- Precision Machined 7075 Aircraft Grade Alum Front and Rear Bulkheads and Covers.
- Differentials raised allowing optimum driveshaft angle.
- Redesigned Motor Mount allowing wider range of gear ratios from 15 to 33T on a 48P 85T Spur at a final drive ratio of 5.15 to 11.33.
- mported ultra-smooth and durable Bando Drive Belts.
- Premium Grade 3.5mm Graphite Shock Towers.
- 3 Racing’s ‘Factory Racing Products’ Spec PTFE Coated Hardened 7075 Alum Ball Heads and Shock Bodies.
- Upper Deck Belt Stabilizer.
- New Composite Adjustable Battery Mounts with Precision Positioning System.
- Battery Strap Mounting System eliminates the need for fiber tapes.
- Ultra Fit Composite Servo Horn.
- Two Piece Rear Front A Arm Pivot Pin Mounts.
- New Composite Front Spool with Replaceable Drive Cups.
- 2.25mm Main Chassis.
- 2mm X Cut Upper Chassis.
- Length: 434mm (without Body & Foam Bumper)
- Weight: unknown yet
- Wheelbase: 257mm
- Tread Front and Rear: 163mm (Front) / 161mm (Rear)
- Gear Ratio: 2:1 (38T/19T)
- 3RACING Sakura Ultimate 1/10 Touring Car (1 Set)
- 2 Channel Radio System
- Steering Servo
- Electronic Speed Controller
- 540 Type Motor and 48 Pitch Pinion Gear
- Polycarbonate Body Shell and Paint
- Battery and Charger
- Assembly Tools