3Racing Sakura D4 RWD Sport Black Edition 1/10 Drift Car Kit #KIT-D4RWDS/BK
This is 3Racing Sakura D4 RWD Sport Black Edition 1/10 Drift Car Kit.
*Photos for reference only.
Color: KIT-D4RWDS/BK main color is mysterious black to replace the fashionable Sakura pink to meet those drivers who want a more masculine looking car.
Main Chassis: KIT-D4RWDS/BK main chassis specially trimmed an area for Curve Slide Track Steering For D4 (NOT INCLUDED - Sold Separately) which will allows driver to adjust the slide track easier when it is assembled on the chassis. In addition, new chassis added 2 new holes at the rear for the brass weight balancer.
Shock: KIT-D4RWDS/BK comes with mono shock to increase car traction ability and better handling. Furthermore less shock means less maintenance and adjustments!
Upper Suspension Arms: KIT-D4RWDS/BK simplified front upper suspension arms allow drivers to adjust the caster angle even easier to meet the difference track needs.
Knuckles: KIT-D4RWDS/BK uses KPI knuckles which can use with D3 & D4 Sport Edition Brake Disc Set.
Rim: To match with the black color chassis KIT-D4AWDS/BK included sliver color rims making the car looks more stylish!
Front Bulkhead Cover: KIT-D4RWDS/BK new design front bulkhead cover included 2 holes for Front IFS Damper System for D4RWD only(NOT INCLUDED - Sold Separately) assemble needed
3Racing Sakura D4 RWD Sport Black Edition 1/10 Drift Car Kit (1 set)
OMG Low Profile 13KG 0.07 Sec Coreless Digital Servo Black For RC Drift Car #D2-LP-CM13S/BK
This is OMG Low Profile 13KG 0.07 Sec Coreless Digital Servo Black For RC Drift Car.
Recommended for RWD Drift
High performance and high quality middle aluminum case low profile coreless digital servo
Gears are titanium coated designed for superior endurance and durability
Zero dead band assures legendary precision
Aluminum middle case helps dissipate heat
Digital precision provides great accuracy and performance
Ball bearing supported output 25T shaft
Compatible with all types of Radio system
Pulse width travel is adjustable
Operating Voltage Range: 6 - 8.4Volts DC
Bearing Type: Dual Ball Bearings
Speed (s/60°@6.0V/7.4V/8.4V): 0.1 / 0.08 / 0.07
Torque oz./in. (6.0V/7.4V/8.4V): 140 / 150 / 170
Torque kg./cm. (6.0V/7.4V/8.4V): 10 / 11 / 12.8
Size : 40.5 x 20 x 29mm
Motor Type: Coreless motor
Control System: +Pulse Width Control 1500µsec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Temperature Range(℃): -10° - 50°
Idle Current (@6.0V/7.4V/8.4V): 3.2mA/4mA
No Load Running Current (6.0V/7.4V/8.4V): 300mA/400mA
Stall Current (6.0V/7.4V/8.4V): 3200m/3900mA
Dead Band Width: 2µs
Potentiometer Type: Rotating(Max.220°)
Connector Wire Length: 11.8 in. / 300 mm. OMG wire
Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC #ESC-1060WP
After the revolutionary Hacktronic ESC introduction, Yeah Racing is now introducing the almighty Tritronic 1/10 Waterproof Brushed 60A Electronic Speed Controller ESC. It is water-proof & dust-proof, making it almighty to race under all weather condition. It has 3 running modles compatible to various vehicles and multiple protections in case of low voltage, over-heating or Throttle signal loss.
For: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
Water-proof and dust-proof, suitable for all-weather condition races.
Small size with built-in capacitor module.
Fwd/Rev/Br running mode fits for various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).
Great current endurance capability.
Great built-in BEC output capacity.
Automatic throttle range calibration, easy to use.
Easy to set the ESC parameters with jumpers.
Multiple protections: Low voltage cut-off protection for battery / Over-heat protection / Throttle signal loss protection.
Fwd. Cont. / Peak Current: 60A /360A
Rev. Cont. / Peak Current: 30A /180A
Voltage Range: 2-3S Lipo or 5-9 NiMH
Cars Applicable: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC (1 Set)
Manual (1 pc)
Yeah Racing Hackmoto V2 13T 540 Brushed Motor #MT-0012
This Yeah Racing Hackmoto V2 Modified brushed motor series are high performance 540 motors designed exqusitivly for competitive RC usage.
Hackmoto V2 featured premium quality material with high strength magnets for unmatched brushed motor speed and torque. Beside of its performance, the motor featured direct-solder wiring tabs for flexible soldering options. It is also designed to be rebuildable with an easily accessible commutator and replaceable brushes and springs. The motor also adapted dual-ball bearings design yields better performance, allowing a smooth ride, precise control with best possible efficiency.
For: 1/10 RC Car
Rebuildable with an easily accessible commutator and replaceable brushes and springs
High strength magnets for unmatched brush-motor performance
Specifically designed for R/C vehicles that require precise movement control
Excellent torque and long-run times
Direct-Solder Wiring Tabs for flexible soldering options
Dual-ball Bearings Design
Input Voltage: 7.4v
Max. Input Voltage: 11.1V
Shaft Length: 13mm
Yeah Racing Hackmoto V2 13T 540 Brushed Motor (1 pc)
Onisiki Aluminum Case High Stability Gyro For RC Car Drift F1 Touring Offroad #ONI2801
*Photos for reference only.
Gyros, a new technology which helps drivers keep their car in a straight line. Be it buggies to drift cars, every car will be able to make use of this gyro to keep their car under control! CNC anodized outter shell with engraved Oniski Logo to give extra protection for the circuit board. The gyro gain is adjustable from both the gyro and from your transmitter if you have more than 2 channels on both your receiver and transmitter.
Onisiki's 2 channel 2.4Ghz Radio Kit with a receiver that features failsafe function which aims to prevent any accidents if your battery runs out on either on receiver or transmitter. If the Receiver is not able to receive any signal, from the control to Throttle, the parameter of Throttle on Receiver will turn back to its original setting! Features dual rate control and servo reverse for any custom rc enthusiast!
My receiver and transmitter doesn't work. The steering works but not the power to the motor. I have tried using another remote and it works. I'm trying to email rcmart as to how to bind it or get a refund but have not heard from them.