3Racing Sakura D4 AWD Sport Black Edtion 1/10 Drift Car Kit w/ Servo ESC Gyro Motor 2.4GHz Radio Beginner Combo Set #CB1169
[CB1169]

3Racing Sakura D4 AWD Sport Black Edtion 1/10 Drift Car Kit w/ Servo ESC Gyro Motor 2.4GHz Radio Beginner Combo Set #CB1169

Combo Included:

• 3Racing Sakura D4 AWD Sport Black Edition 1/10 Drift Car Kit #KIT-D4AWDS/BK
• OMG Low Profile 13KG 0.07 Sec Coreless Digital Servo Black For RC Drift Car #D2-LP-CM13S/BK
• Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC #ESC-1060WP
• Yeah Racing Hackmoto V2 13T 540 Brushed Motor #MT-0012
• Onisiki Aluminum Case High Stability Gyro For RC Car Drift F1 Touring Offroad #ONI2801
• Onisiki 2.4GHz 2 Channel 2.4Ghz Transmitter w/ Receiver #ONI3701

3Racing Sakura D4 AWD Sport Black Edition 1/10 Drift Car Kit #KIT-D4AWDS/BK

Description:

This is 3Racing Sakura D4 AWD Sport Black Edition 1/10 Drift Car Kit.

*Photos for reference only.

Feature:

• Color: KIT-D4AWDS/BK main color is mysterious black to replace the fashionable Sakura pink to meet those drivers who want a more masculine looking car.
• Main Chassis: KIT-D4AWDS/BK main chassis specially trimmed an area for Aluminum Steering System For D4 (NOT INCLUDED - Sold Separately) which will allows driver to adjust the slide track easier when it is assembled on the chassis. In addition, new chassis added 2 new holes at the rear for the brass weight balancer.
• Shock: KIT-D4AWDS/BK comes with mono shock to increase car traction ability and better handling. Furthermore less shock means less maintenance and adjustments!
• Upper Suspension Arms: KIT-D4AWDS/BK simplified front upper suspension arms allow drivers to adjust the caster angle even easier to meet the difference track needs.
• Knuckles: KIT-D4AWDS/BK uses standard knuckles which can use with D3 & D4 Sport Edition Brake Disc Set.
• Rim: To match with the black color chassis KIT-D4AWDS/BK included sliver color rims making the car looks more stylish!
• Front One Way: KIT-D4AWDS/BK included front one way for easier handling and setting; also to create the realistic handbrake effect and on power steering.

Include:

• 3Racing Sakura D4 AWD Sport Black Edition 1/10 Drift Car Kit (1 set)

OMG Low Profile 13KG 0.07 Sec Coreless Digital Servo Black For RC Drift Car #D2-LP-CM13S/BK

Description:

This is OMG Low Profile 13KG 0.07 Sec Coreless Digital Servo Black For RC Drift Car.

Feature:

• Recommended for RWD Drift
• High performance and high quality middle aluminum case low profile coreless digital servo
• Gears are titanium coated designed for superior endurance and durability
• Zero dead band assures legendary precision
• Aluminum middle case helps dissipate heat
• Digital precision provides great accuracy and performance
• Ball bearing supported output 25T shaft
• Compatible with all types of Radio system
• Pulse width travel is adjustable

Specification:

• Type: Digital
• Operating Voltage Range: 6 - 8.4Volts DC
• Bearing Type: Dual Ball Bearings
• Speed (s/60°@6.0V/7.4V/8.4V): 0.1 / 0.08 / 0.07
• Torque oz./in. (6.0V/7.4V/8.4V): 140 / 150 / 170
• Torque kg./cm. (6.0V/7.4V/8.4V): 10 / 11 / 12.8
• Size : 40.5 x 20 x 29mm
• Weight: 50g
• Motor Type: Coreless motor
• Control System: +Pulse Width Control 1500µsec Neutral
• Required Pulse: 3-5 Volt Peak to Peak Square Wave
• Operating Temperature Range(℃): -10° - 50°
• Idle Current (@6.0V/7.4V/8.4V): 3.2mA/4mA
• No Load Running Current (6.0V/7.4V/8.4V): 300mA/400mA
• Stall Current (6.0V/7.4V/8.4V): 3200m/3900mA
• Dead Band Width: 2µs
• Potentiometer Type: Rotating(Max.220°)
• Connector Wire Length: 11.8 in. / 300 mm. OMG wire
• Connector Wire Gauge: 25 AWG
• Connector Type: JR
• Gear Type: Titanium gears
• Frequency: 330Hz
• Shaft: 5.85mm 25T

Include:

• OMG Low Profile 13KG 0.07 Sec Coreless Digital Servo Black(1 pc)

Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC #ESC-1060WP

Description:

After the revolutionary Hacktronic ESC introduction, Yeah Racing is now introducing the almighty Tritronic 1/10 Waterproof Brushed 60A Electronic Speed Controller ESC. It is water-proof & dust-proof, making it almighty to race under all weather condition. It has 3 running modles compatible to various vehicles and multiple protections in case of low voltage, over-heating or Throttle signal loss.

Feature:

• For: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
• Water-proof and dust-proof, suitable for all-weather condition races.
• Small size with built-in capacitor module.
• Fwd/Rev/Br running mode fits for various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).
• Great current endurance capability.
• Great built-in BEC output capacity.
• Automatic throttle range calibration, easy to use.
• Easy to set the ESC parameters with jumpers.
• Multiple protections: Low voltage cut-off protection for battery / Over-heat protection / Throttle signal loss protection.

Specification:

• Model: ESC-1060WP
• Fwd. Cont. / Peak Current: 60A /360A
• Rev. Cont. / Peak Current: 30A /180A
• Voltage Range: 2-3S Lipo or 5-9 NiMH
• Cars Applicable: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
• 2S Lipo or 6 NiMH
• 540 or 550 Size Motor: ≥12T Or RPM<30000 @7.2V
• 3S Lipo or 9 NiMH
• 540 or 550 Size Motor: ≥18T Or RPM< 20000 @7.2V
• 4S Lipo or 12 NiMH
• Not Available
• Resistance: Fwd 0.001Ω, Rev 0.002Ω
• BEC Output: 2A/5V (Linear Mode)
• PWM Frequency: 1KHz
• Dimension / Weight: 36.5*32*18 / 39g
• Cooling Fan: Without cooling fan
• Running Modes: Forward/Reverse/Brake, Forward/Brake, Forward/Reverse

Include:

• Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC (1 Set)
• Manual (1 pc)

Yeah Racing Hackmoto V2 13T 540 Brushed Motor #MT-0012

Description:

This Yeah Racing Hackmoto V2 Modified brushed motor series are high performance 540 motors designed exqusitivly for competitive RC usage.

Hackmoto V2 featured premium quality material with high strength magnets for unmatched brushed motor speed and torque. Beside of its performance, the motor featured direct-solder wiring tabs for flexible soldering options. It is also designed to be rebuildable with an easily accessible commutator and replaceable brushes and springs. The motor also adapted dual-ball bearings design yields better performance, allowing a smooth ride, precise control with best possible efficiency.

Feature:

• Size: 540
• For: 1/10 RC Car
• Color: Black
• Rebuildable with an easily accessible commutator and replaceable brushes and springs
• High strength magnets for unmatched brush-motor performance
• Specifically designed for R/C vehicles that require precise movement control
• Excellent torque and long-run times
• Direct-Solder Wiring Tabs for flexible soldering options
• Dual-ball Bearings Design

Specification:

• Length: 70mm
• Width: 36mm
• Shaft: 3mm
• Turn: 13
• Input Voltage: 7.4v
• Max. Input Voltage: 11.1V
• Shaft Length: 13mm
• AMP:3.81
• R.P.M:30300

Include:

• Yeah Racing Hackmoto V2 13T 540 Brushed Motor (1 pc)

Onisiki Aluminum Case High Stability Gyro For RC Car Drift F1 Touring Offroad #ONI2801

*Photos for reference only.

Description:

Gyros, a new technology which helps drivers keep their car in a straight line. Be it buggies to drift cars, every car will be able to make use of this gyro to keep their car under control! CNC anodized outter shell with engraved Oniski Logo to give extra protection for the circuit board. The gyro gain is adjustable from both the gyro and from your transmitter if you have more than 2 channels on both your receiver and transmitter.

Feature:

• For: R/C Cars
• Material: Aluminum Case
• Color: Black

Specification:

• Dimension: 25.6*24.5*10mm
• Weight: 13.5g
• Operating Voltage: 6v
• Sensor: Vibrating Gyroscopic Sensor

Include:

• Aluminum Case High Stability Gyro (1 pc)
• Adjustment Screwdriver (1 pc)
• Manual (1 pc)

Onisiki 2.4GHz 2 Channel 2.4Ghz Transmitter w/ Receiver #ONI3701

*Photos for reference only.

Description:

Feature:

• For: RC Cars and Boats
• Transmitting Frequency: 2.4GHz
• Transmitter Channels: 2 Channels
• Receiver Channels: 3 Channels
• Operation method: Wheel + trigger type
• Frequency: 2.40-2.48GHz
• Code type: GFSK
• Bandwidth: 500Hz
• Band: 160
• RF Power: Less than 20DB
• 2.4G System: AFHDS
• Sensitivity: 1024
• ST Range: 90
• TH Range: 45 (F:30; B:15)
• Transmitter Colour: Black and Red
• Transmitter Material: Plastic
• Receiver Material: Plastic

Specification:

Transmitter:

• Power: 3.7V DC
• Size: 224 x 156 x 94.5mm

Receiver:

• RF. receiver sensitivity: -100dbm
• Input Voltage: 4.5-6vdc
• ANT length: 33mm
• Size: 37.6 x 22.3 x 13mm

Include:

• Onisiki 2.4GHz 2 Channel 2.4Ghz Transmitter (1 pc)
• Onisiki 3 Channel 2.4GHz Receiver (1 pc)
• TX Antenna (1 pc)
• Bind Plug (1 pc)
• Manual CD (1 pc)

Require:

• AA Battery for Transmitter (4 pcs)