Buy this item and earn 807 points valued at USD$3.23.
MST RMX-D VIP 4WD 1/10 RC Drift Car Kit 532126 w/ OMG Low Profile Brushless Digital Servo BM07S #CB0833
Please noted that the ETA of this product will be 3-4 weeks after the payment confirmed and subject to change.
Combo Include:
MST RMX-D VIP 4WD 1/10 RC Drift Chassis Red #532126
OMG High Voltage Low Profile High Speed Brushless Digital Servo 7KG 0.05Sec For RC Drift Car #D2-LP-BM07S
MST RMX-D VIP 4WD 1/10 RC Drift Chassis Red #532126
Description:
This is MST RMX-D VIP 4WD 1/10 RC Drift Chassis Red.
*Photos for reference only.
Feature:
First design of anti-torque force for RC drifts!!
Superior acceleration and horizontal axis driving force than shaft driven system.
Ideal straight centroid configuration.
Absolute superiority in weight transferring.
Integrate 4WD, CS and 2WD performances.
Include:
MST RMX-D VIP 4WD 1/10 RC Drift Chassis (1 Set)
Front One Way
Rear Spool Axle
Wheel & Tires
Instruction
Require:
Motor
ESC
Radio
Servo
Charger
OMG High Voltage Low Profile High Speed Brushless Digital Servo 7KG 0.05Sec For RC Drift Car #D2-LP-BM07S
Description:
The HDT045070B servo is a low profile, powerful, accurate ultra speed precision digital servo with its heat sink aluminum case, long wear 7075 Aluminum anodize titanium gears, a precision brushless motor and improved electronics, legendary quality.
It can be capable of 6.0 to 7.4 volt operation.
The HDT045070B takes a whole new galaxy of performance.
RC OMG provide legendary digital precision with higher torque and faster speed servos.
When Buy at rcMart, This Brushless servo are warranted for three years from the date of purchase to be free from manufacturing or component defects. During the warranty period RC OMG will repair or replace (at our discretion) any defective products. Please keep your original order receipt as proof of the date of purchase.
This warranty does not cover abuse, neglect, or damage due to incorrect wiring, over voltage, overloading, misuse, crash damage, improper installation or damages caused by alteration by unauthorized persons.
Feature:
For: 1/10 Drift
Material: Aluminum
Gears: Long Wear 7075 Aluminum Anodize Titanium
Super high 12 bit (4096) resolution
Robust output for superb response in extreme maneuvers
Zero dead band assures legendary precision
Aluminum middle case helps dissipate heat
Digital precision provides great accuracy and performance
Ball bearing-supported output 25T shaft
Compatible with all types of Radio system
Pulse width travel is adjustable
Specification:
Type: Digital
Operating Voltage Range: 6.0-7.4Volts DC
Bearing Type: Dual Ball Bearings
Speed (s/6)0°@6.0 /7.4V: 0.06/ 0.05
Torque oz./in. (6.0V/7.4V): 76/97
Torque kg./cm. (6.0V/7.4V): 5.5/7
Dimensions: 40.2mm x 20.1mm x 25.2mm
Weight: 45g
Motor Type: Brushless motor
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Temperature Range(℃): -10° - 50°
Idle Current (@6.0V/7.4V): 4mA/5mA
No Load Running Current (6.0V/7.4V): 300mA/400mA
Stall Current (6.0V/7.4V): 3200m/3900mA
Dead Band Width: 2µs
Potentiometer Type: Rotating(Max.220°)
Connector Wire Length: 11.8 in. / 300 mm.
Connector Wire Gauge: 25 AWG
Connector Type: JR
Gear Type: Titanium Gears
Frequency: 330Hz
Shaft: 6mm 25T
Include:
High Voltage Low Profile High Speed Brushless Digital Servo (1 pc)