This is MST RMX-D VIP 4WD 1/10 RC Drift Chassis Purple.
*Photos for reference only.
First design of anti-torque force for RC drifts!!
Superior acceleration and horizontal axis driving force than shaft driven system.
Ideal straight centroid configuration.
Absolute superiority in weight transferring.
Integrate 4WD, CS and 2WD performances.
MST RMX-D VIP 4WD 1/10 RC Drift Chassis (1 Set)
Front One Way
Rear Spool Axle
Wheel & Tires
OMG High Voltage Low Profile High Speed Brushless Digital Servo 7KG 0.05Sec For RC Drift Car #D2-LP-BM07S
The HDT045070B servo is a low profile, powerful, accurate ultra speed precision digital servo with its heat sink aluminum case, long wear 7075 Aluminum anodize titanium gears, a precision brushless motor and improved electronics, legendary quality.
It can be capable of 6.0 to 7.4 volt operation.
The HDT045070B takes a whole new galaxy of performance.
RC OMG provide legendary digital precision with higher torque and faster speed servos.
When Buy at rcMart, This Brushless servo are warranted for three years from the date of purchase to be free from manufacturing or component defects. During the warranty period RC OMG will repair or replace (at our discretion) any defective products. Please keep your original order receipt as proof of the date of purchase.
This warranty does not cover abuse, neglect, or damage due to incorrect wiring, over voltage, overloading, misuse, crash damage, improper installation or damages caused by alteration by unauthorized persons.
For: 1/10 Drift
Gears: Long Wear 7075 Aluminum Anodize Titanium
Super high 12 bit (4096) resolution
Robust output for superb response in extreme maneuvers
Zero dead band assures legendary precision
Aluminum middle case helps dissipate heat
Digital precision provides great accuracy and performance
Ball bearing-supported output 25T shaft
Compatible with all types of Radio system
Pulse width travel is adjustable
Operating Voltage Range: 6.0-7.4Volts DC
Bearing Type: Dual Ball Bearings
Speed (s/6)0░@6.0 /7.4V: 0.06/ 0.05
Torque oz./in. (6.0V/7.4V): 76/97
Torque kg./cm. (6.0V/7.4V): 5.5/7
Dimensions: 40.2mm x 20.1mm x 25.2mm
Motor Type: Brushless motor
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Temperature Range(℃): -10░ - 50░
Idle Current (@6.0V/7.4V): 4mA/5mA
No Load Running Current (6.0V/7.4V): 300mA/400mA
Stall Current (6.0V/7.4V): 3200m/3900mA
Dead Band Width: 2Ás
Potentiometer Type: Rotating(Max.220░)
Connector Wire Length: 11.8 in. / 300 mm.
Connector Wire Gauge: 25 AWG
Connector Type: JR
Gear Type: Titanium Gears
Shaft: 6mm 25T
High Voltage Low Profile High Speed Brushless Digital Servo (1 pc)