This receiver is adopted high frequency head, high stability and more advantage features, for your operating the receiver correctly and conveniently. It includes six wireless cameras with six different frequencies. The camera can be powered by regular 9V battery.
The receiver has “auto receiving mode and manual switching receiving mode”.
1. Operation at Manual receiving mode
Press the key “1” “2” “3” “4” for Manual receiving/ Definition receiving channel”, the receiver will receive the frequency of the corresponding channel, and red indicator corresponding the channel is on.
2. Operation at Auto receiving mode
Press the “Auto”, the receiver will switch to Auto mode, and the green indicator is on.
3. Definition channel receiving mode
In Manual receiving mode (If the receiver is in Auto mode, press any key for manual receiving and the receiver will switch to manual receiving mode), press key “Auto” not stop, at the same time press other key for manual receiving to choice channel, the corresponding indicator is on, it shows channel is selected to receive frequency; press the key again, the indicator is off, it shows the channel has stopped receiving. After every channel are selected as requirement then stop pressing key “Auto”, the receiver will switch to auto receiving mode, and press the key corresponding the channel which just selected to receive frequency, pass the other channels which not be selected, it is necessary to receive frequency.
4. Operation for switch time in Auto receiving mode
In Auto receiving mode, press Key “+”, then auto switching time will expand about 0.5sec, press key “-“, then the time will reduce about 0.5sec. the switching time range for the 6 Channel receiver is between 0.5sec and 35sec.