R31House GRK Global 1/10 Drift Car Kit w/ OMG 07S Servo YR ESC 13.5T Motor Gyro RWD Upgrade Combo #CB0873 Discon [CB0873]
Our Price: Price: USD$390.00USD$578.50
You Save: $188.50 (33%)
Stock: Out of Stock!
Buy this item and earn 390 points valued at USD$1.56.
R31House GRK Global 1/10 Drift Car Kit w/ OMG 07S Servo YR ESC 13.5T Motor Gyro RWD Upgrade Combo #CB0873
R31House GRK Global 1/10 Rear Motor 4WD Shaft Driven RC Drift Car Chassis Kit #GRKG x1
Yeah Racing High Precision Gyro GC301 For RC Drift F1 Car #GC301 x1
Yeah Racing Aluminum Nos Nitrous Oxide Balance Weight Bottle 23g For 1/10 RC Silver #YA-0429SV x1
Yeah Racing Rear Universal Steel Swing Shaft For Yokomo MR-4TCSD #SD-015V2 x1
OMG Low Profile Digital High Speed Coreless Servo 7KG 0.08 Sec For RC Drift Car #D2-LP-CM07S x1
Yeah Racing Hacktronic-D Street Drifting 120A Programmable Brushless Sensored ESC #HTN-E02 x1
Yeah Racing Hackmoto XTA 13.5T 540 3660KV Brushless Sensored Motor #XTA-T135 x1
R31House GRK Global 1/10 Rear Motor 4WD Shaft Driven RC Drift Car Chassis Kit #GRKG
This is R31House GRK Global 1/10 Rear Motor 4WD Shaft Driven RC Drift Car Chassis Kit.
*Photos Reflecting A Prototype Model. Minor Changes on Spec, Style and Feature Shall be Expected In the Final Version
New Suspension Geometry
Aeration Style Damper For Better Control And Smoother Slide
New Designed Easy Access Aluminum Motor Mount
Steering Rack Designed To Have Minimal Geometry Slop
CFRP Carbon Chassis And Upper Deck For Minimal Weight
Compatible With GRK2 Series Gear
Easy To Access Gear Box Design
4 Point Stablelized Gearbox Design To Achieve Great Precision
Aluminum Hop Ups To Replace / Upgrade Current Plastic Parts Will Be Available Soon
Size: 1/10 scale
Tread: Front 194mm Rear 192mm
Gear Ratio: Internal Ratio (2.4375)(39/16)
Drive System: Shaft/ 4WD
Damper: Oil Damper w/ Bumper Control
Suspension: 6 Holes (0.8) Damper Oil 500# (Silicon O Ring & Rubber Damper Oil Seal)
Steering System: Rail type
Bearing: Full Ball Bearings
Caster: 7 degrees
Camber: +5 to -15 degrees
Chassis (1 pc)
Wheel (4pcs) and tire (4pcs)
Manual (1 pc)
2 Channels Transmitter
RC Drift Servo
1/10 Drift Body
Yeah Racing High Precision Gyro GC301 For RC Drift F1 Car #GC301
High Precision GC301-Gyro for RC Cars, It is a device using gyro sensor and software algorithm to adjust steering output, providing you with a more stable and controlled driving experience.
The Gyro's heading hold effect manages steering output by automatically keeping the car's tires aligned in the direction you chose. It will also precisely maintain car direction regardless of the amount of traction of the track or outside force apply to the car. With heading hold, the car is more maneuverable and controllable.
*Photos for reference.
For: 1/10 RC Drift/ F1 Car
Make corrective steering adjustment for RC cars GC301 gyro allows you to drive the RC car toward a given direction and taking precision turns at high speeds more manageable, more controllable and more stability.
Remote gain function You can adjust gain from the transmitter CH3 by using the remote gain function. Gain can also be adjusted with the trimmer on the GC301.
Gyro Sensor: Vibration Structure Gyro
Operating Voltage: 4-8.4V
Current Drain: 25mA
Operating Temperature Range: -10şC to +45şC
Yeah Racing High Precision Gyro GC301 (1 pc)
Extension Cord (2 pcs)
Tape (1 pc)
Manual (1 pc)
Yeah Racing Aluminum Nos Nitrous Oxide Balance Weight Bottle 23g For 1/10 RC Silver #YA-0429SV
This is Yeah Racing Nos Nitrous Oxide Balance Weight Bottle 23g For 1/10 RC Silver. This bottle can help fine tuning your chassis's balance while giving it a better look. Yeah Racing exquisitely use the premium quality of material coupled with precise CNC cutting to manufacture this Balance Weight Bottle.
For: Balance Weight Bottle
Yeah Racing Aluminum Nos Nitrous Oxide Balance Weight Bottle 23g For 1/10 RC Silver (1 pc)
Accessories (1 Set)
Yeah Racing Rear Universal Steel Swing Shaft For Yokomo MR-4TCSD #SD-015V2
This is Yeah Racing Rear Universal Steel Swing Shaft For Yokomo MR-4TCSD. This product is very durable, suit for running.
For: Yokomo MR-4TCSD
OMG Low Profile Digital High Speed Coreless Servo 7KG 0.08 Sec For RC Drift Car #D2-LP-CM07S
The D2-LP-CM07S (LDT045070C) servo is a powerful, accurate high speed and high precision digital servo with its waterproof case, long wear titanium gears and copper gears, a precision coreless motor and improved electronics, legendary quality.
It can be capable of 4.8 to 6.0 volt operation
The D2-LP-CM07S (LDT045070C) takes a whole new galaxy of performance.
RC OMG provides legendary digital precision with higher torque and faster speed servos.
When Buy at rcMart, This coreliess servo is warranted for oneyears from the date of purchase to be free from manufacturing or component defects. During the warranty period RC OMG will repair or replace (at our discretion) any defective products. Please keep your original order receipt as proof of the date of purchase.
This warranty does not cover abuse, neglect, or damage due to incorrect wiring, over voltage, overloading, misuse, crash damage, improper installation or damages caused by alteration by unauthorized persons.
For: 1/10 Drift, On Road RC
Premium Value at lower price point
Long wears titanium gear and copper gears
Digital precision provides great accuracy and performance
Ball bearing-supported output 25T shaft
Compatible with all types of Radio system
Operating Voltage Range: 4.8 -6.0Volts DC
Bearing Type:Dual Ball Bearings
Speed (s/60°@4.8V/6.0V): 0.10/ 0.08
Torque oz./in. (4.8V/6.0V): 76/97
Torque kg./cm. (4.8V/6.0V): 5.5/7
Size: 40.9mm x 20mm x 25.2mm
Weight : 45g
Motor Type: Coreless
Control Systemt: +Pulse Width Control 1500µsec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Temperature Range(℃): -10° - 50°
Idle Current (4.8V/6.0V): 4mA/5mA
No Load Running Current (4.8V/6.0V): 300mA/400mA
Stall Current (4.8V/6.0V): 2500m/2800mA
Dead Band Width: 2µs
Potentiometer Type: Rotating(Max.220°)
Connector Wire Length: 11.8 in. / 300 mm.
Connector Wire Gauge: 25 AWG
Connector Type: JR
Gear Type: Titanium Gears + Copper Gears
Shaft: 6mm 25T
Yeah Racing Hacktronic-D Street Drifting 120A Programmable Brushless Sensored ESC #HTN-E02
A revolutionary ESC that allows you to switch from Touring, Drift and Crawler programs on one ESC (With the “Hacktronic Firmware Update USB Cable #HTN-303”, Sold Separately).
Fully Programmable in each program with its own set of parameters with very user-friendly interface.
The Hacktronic-T is the ESC Preset in Crawlers Programs which allows the change of 9 Parameters with the Hacktronic Program Card #HTN-301 (Sold Separately). 9 Parameters are Timing Start, Timing, Timming Interval, Punch, Drag Brake, Initial Brake, Brake LV, Release Curve and RPM Lock. These parameters and programs are exquisitely designed to control the weight shift characteristic of your car to fit your driving style and gain more controls at different stages of corners.
Support Brushless Sensored Motor
Multi Protection System (Motor Lock, Overheat, Signal Fail)
Comes With 25mm Cooling Fan
User Friendly Setting Interface
Can Swap Around to Crawler and TouringProgram with Firmware Update USB Cable #HTN-303
Specially for Drifters with 9 Drifting Settings (Timing Start, Timing, Timming Interval, Punch, Drag Brake, Initial Brake, Brake LV, Release Curve and RPM Lock)
Voltage Input: 4.8 – 9.9V DC, 3 – 6 Cells NiCD/NiMH
1~2-Cell LiPO / 1-3 Cell LiFe
Peak Current: 540A
Motor Limit: Over 5.5 Turns
B.E.C: 6V / 3.0A
Hactronic ESC (1 pc)
Cooling Fan (1 pc)
Power Capacitor (1 pc)
Low Profile Digital High Speed Coreless Servo (1 pc)
Yeah Racing Hackmoto XTA 13.5T 540 3660KV Brushless Sensored Motor #XTA-T135
Hackmoto XTA motor is the second Gen Hackmoto Motors with lots of improvements in terms of design, engineering and material and is exquisitely crafted to achieve high performance in demanding environments. The result speaks for itself and was very competitive to even the most high-end motors in the market with its low friction, low heat, low power consumption, low wearing with high power output characteristic.
The new Motor is equipped with the Xtreme Timing Advancement System (XTA™ ) for precise timing and turbo timing as well as physical timing set ups when used with Hacktronic ESC.
For: 1/10 RC Car
XTA™ Timing (-3 to +3 Step-less adjustment)
Premium Quality Ball Bearing Minimum Friction
High Purity Copper Winding
High Power Neodymium Magnet
Premium Quality Material for Minimum Heat and Energy Loss
Sensor-based for Excellent Torque and Low-Speed Smoothness
Sensor-based for Precise Timing and Turbo Timing function for exceptional Acceleration and Top Speed. (With Hacktronic ESC)
Aluminum Endbells For Light Weight and better heat dissipation
Venting Holes Engineered Carefully For Efficient Air Flow and Cooling