HobbyWing QuicRun 1/10 Brushless Sensored System 60A ESC w/ 10.5T 3300KV Motor & YA-0180 Fan Combo #CB0693 (Discontinued)
Our Price: Low Price: USD$94.90
Stock: Out of Stock!
Buy this item and earn 95 points valued at USD$0.38.
HobbyWing QuicRun 1/10 Brushless Sensored System 60A ESC w/ 10.5T 3450KV Motor & YA-0180 Fan Combo #CB0693
Combo Set Included:
- HobbyWing QuicRun 1/10 Brushless Sensored 60A ESC 10BL60
- HobbyWing QuicRun 1/10 3650 10.5T 3300KV Brushless Sensored Motor
- Yeah Racing Tornado High Speed Cooling Fan 30 x 30mm for Motor Heat Sink #YA-0180
HobbyWing QuicRun 1/10 Brushless Sensored 60A ESC 10BL60
- For: 1/10 & 1/12 On-road / Off-road / F1 / Drift car race / Street race for fun / Club racing / STOCK race with 0 timing / Drift car race
- High performance but low price, users can own this reliable race-ready ESC at an affordable cost.
- Compact size, suitable for various car chassis.
- Auto identification system can recognize sensored / sensorless brushless motors automatically.
- Excellent operating feelings and plentiful adjustment options, suitable for most kinds of competitions.
- 8 steps of timing adjustment greatly increase the output power of the motor, and unlock its maximum potential.
- Proportional brake with 4 steps of Maximum Brake Force adjustment, 8 steps of Drag Brake Force adjustment and 4 steps of Initial Brake Force adjustment.
- 9 steps of acceleration (punch) adjustment, from “soft” to “very aggressive” to fit for different kinds of cars, tires and tracks.
- Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection / Motor Lock-up protection.
- One-button (the “SET” button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings.
- Compatible with the optional device ---- the portable Digital LED Program Card, especially convenient for outdoor use.
- Model: QUICRUN-10BL60-SENSORED
- Cont./Peak Current/ Resistance: 60A / 380A / 0.0008 Ohm
- Motor Type Supported: Sensored / Sensorless Brushless Motor
- Car Applicable: 1/10 & 1/12 On-road / Off-road / F1 / Drift car race / Street race for fun / Club racing / STOCK race with 0 timing / Drift car race
- Motor Limit:
- For 4-6 cells NiMH/2S Lipo
- ≥8.5T(1/10 On-road), ≥13.5T(1/10 Off-road) *"T" indicates the limit value of motor turns when the ESC timing is set to 0. The larger the timing, the more turns the motor needs.
- 8-9 cells NiMH/3S Lipo
- ≥13.5T(1/10 On-road), ≥17.5T(1/10 Off-road) *"T" indicates the limit value of motor turns when the ESC timing is set to 0. The larger the timing, the more turns the motor needs.
- Battery: 4-9 Cells NiMH / 2-3S Lipo
- BEC Output / Operating Voltage of the Cooling Fan: 6V@2A, Linear Mode / 6V (The cooling fan gets its power supply from the built-in BEC)
- Dimension / Weight: 33mm(L)*28mm(W)*31.5mm(H, with cooling fan) / 59g (with wires, without cooling Fan)
- HobbyWing QuicRun 1/10 Brushless Sensored 60A ESC (1 Set)
- Manual (1 pc)
HobbyWing QuicRun 1/10 3650 10.5T 3300KV Brushless Sensored Motor
- For: 1/10 ,1/12 On-Road Touring/Drift car/F1/M car, 1/10 Off-Road Buggy/2WD SCT/Truggy, STOCK/SPORT Race
- Built-in Hall sensor brings drivers the amazing sense of control.
- Top-quality components: heat-resistant magnet, heat-resistant wires and name-brand bearings.
- Dustproof design at the location where motor leads exit.
- Creative design, the gold-plated lockable connector, which can be fastened by screws, utterly eliminated all the potentialities that connectors may loose.
- Detachable structure, easy for clean and maintenance, greatly prolongs the service life of the motor.
- Model: QUICRUN-3650-10.5T
- KV: 3300KV
- LiPo Cells: 2-3
- Resist: 0.0178Ω
- No-load Current: 2.1A
- Max. Output Power: 240W
- Current at the Point of M.O.P: 62A
- Outer Diameter/Length: 35.8mm / 52.5mm
- Diameter of the Shaft: 3.17 / 15mm
- Poles: 2
- Weight: 160g
- Application: 1/10 ,1/12 On-Road Touring/Drift car/F1/M car, 1/10 Off-Road Buggy/2WD SCT/Truggy, STOCK/SPORT Race
- HobbyWing QuicRun 1/10 3650 10.5T 3300KV Brushless Sensored Motor (1 Set)
- Manual (1 pc)
Yeah Racing Tornado High Speed Cooling Fan 30 x 30mm for Motor Heat Sink #YA-0180
- Need something more powerful than your existing motor / ESC fan? This is exactly the fan for you.
- Yeah Racing Tornado Cooling Fan has Ultra High Speed. You need unmatched performance that this fan delivers. This dual ball bearing fan flows up to 100% more air than other similar Fan.
- The maximum power input voltage is 8.4v (2 cells Li-Po)
- For: ESC / Heatsink / Motor
- Color: Black
- Dimensions: 30 x 30 x 10mm
- Bearing: Dual Ball Bearing
- Operating: Voltage 5V
- Start-up Voltage: 3V
- Power: 1.40W
- Fan Speed: 14000 R.P.M (±20%) at 25℃, after 3 min. rotating.
- Max Air Flow: 5.501CFM.
- Current: 0.28A
- Weight: 9.0g
- Connector: JST
- Tornado Cooling Fan (1 Pc)
- Round Head Fitting Screw (4 Pc)
- Instruction Manual (1 Pc)
For the best performance, please run the Yeah Racing Tornado Cooling Fan for 2 - 3 hours continuously on the first time usage.
* The fan was running by using a 2 cells Li-Po battery in the video.
* The video for reference only.