-
-
NOVAK Timbuk2 ESC w/ Ballistic Motor Brushless System 18.5T for RC Crawler #3225
[3225]
Our Price: Price: USD$155.90 USD$165.90You Save: $10.00 (6%)
Stock: 6
Buy this item and earn 156 points valued at USD$0.62.
NOVAK Timbuk2 ESC w/ Ballistic Motor Brushless System 18.5T for RC Crawler #3225
Description:
This is the NOVAK Timbuk2/Ballistic Crawler Brushless 18.5T For 1:10 Onroad and Offroad
Feature:
Designed especially for the demands of crawling vehicles to maneuver over the toughest terrain
Sensor-based for excellent torque and low-speed driveability
Compact and lightweight design
Novak’s exclusive Rock Boost™ electronic timing advance to drastically increase motor RPM at full throttle (in both clockwise and counter-clockwise motor rotations)
Three distinct types of Hill/Drag Brake for significantly stronger brakes that can hold the heaviest rigs on the steepest inclines
Compatible with 540-size and 380-size Novak Crawling Brushless Motors
Water-resistant case with silicone gasket seal to help keep out the elements
Two ESCs in One—when used with a standard brushless motor, the Timbuk 2 utilizes the Novak Edge ESC non-crawling software and can be run with a 10.5T or higher sensored brushless motor
Built-In Voltage Cut-Off Circuitry prevents damage to LiPo/LiFe batteries
Medium-duty BEC for high-torque single servo applications. Don't let the specs fool you--all ESC's BECs are not created equal. The Timbuk2's 2A BEC will go toe-to-toe with many other higher rated units
Built-In 6V output for optional accessory fan or other detail items such as running lights
User friendly One-Touch programming interface with five colored status LEDs to help personalize the speed control's settings
10 adjustable parameters: Hill/Drag Brake, Minimum Drive, Dead Band, Throttle Curve (Linear/Expo), Brake Frequency, Reverse End Point, Drive Frequency, Novak Rock Boost™, Motor Rotation and Voltage Cut-Off
Built-in diagnostic temperature monitoring that lets you quickly check the ESC's operating temperature at any time
On-board Hall Sensor Test to easily and quickly verify that the motor's sensors are working properly
Thermal Overload Protection circuitry to protect the ESC from overheating
Novak's One-Touch Set-Up™ for quick, easy transmitter set-up
Plug-and-Play-- Factory wired with Tamiya®-style battery plug & gold-plated Bullet motor plugs
Gold-plated direct-solder wiring tabs for flexible soldering options
Factory installed power capacitor
User-replaceable input harness
Meets RoHS compliance and includes 120-Day Warranty
Designed, assembled and tested by Novak in Irvine, Calif., using globally sourced components
Specification:
Fwd/Brk/Rev: F / Drag Brake / R (F / B / R when used with a non-crawling motor)
Input Cells: 2S LiPo/LiFe or 4-7 NiMH
Size: 1.15" x 0.95 x 0.66" (29.0 x 24.3 x 16.8 mm)
On-Resistance: 0.00057 ohms @ 25° transistor temperature
RPM per Volt, KV: RPM/ Volt
Motor Limit: 540-size: 13.5T (Novak Crawling Version Brushless Motors only); 380-size: All sensored brushless
BEC: 6.0 volts DC / 2.0 amps (#3224 model includes 5A BEC Module for 7A total)
Power Wire Size: 14G Super-Flex Copper-Strand Silicone Wire
Status LEDs: 5
Battery/Motor Plug: Tamiya-style battery and gold-plated Bullet motor plugs factory-installed
Include:
ESC (1pc)
18.5T MOTOR (1pc)
|
rcMart.com © 2001 - 2013
Facebook
Twitter
Google+
Youtube
Blog