-
-
NOVAK HavocPro SC ESC X-Drive w/ Ballistic Motor Brushless System 8.5T For RC SCT #3122
[3122]
Our Price: Price: USD$184.90 USD$195.90You Save: $11.00 (6%)
Stock: 6
Buy this item and earn 185 points valued at USD$0.74.
NOVAK HavocPro SC ESC X-Drive w/ Ballistic Motor Brushless System 8.5T For RC SCT #3122
Description:
This is the Novak HavocPro SC racing esc set with 540 Ballistic 8.5T motor for Short-Course Truck
SPECIALLY DESIGNED FOR SHORT COURSE
The ever-popular Havoc Pro SC Speed Control is now available paired with more Ballistic Brushless Motors. These systems combine the excellent performance and all around functionality of Novak's short course speed control with the customizable and high-performing Ballistic Motors. The Havoc Pro SC/Ballistic Spec Brushless Systems – 13.5T & 17.5T (#3124 &3125) are perfect for Short Course Truck Racing. They feature the Novak Ballistic Motor's easy-to-adjust timing assembly that alters the RPM range and rebuildable design.
Novak's signature Ballistic Motor contains easy-to-adjust timing assembly that alters the RPM range, and includes heavy-duty solder tabs that are strong enough to endure repeated soldering and tough crashes. Each Ballistic motor is also equipped with a 12.3mm nickel-plated sintered Neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions, and Thermal Overload technology to ensure the motor is operating at a safe temperature.
The motors also feature a completely rebuildable design, allowing for the ability to upgrade or replace various motor parts. These celebrated motors also feature interchangeable wound stator construction, allowing the racer to change their motor's wind by simply replacing the motor's wound stator!
Feature:
ESC
Novak's Dynamic Timing Advance™ increases the motor's RPM dynamically through the throttle band for higher speeds—eight on-board adjustments from 0° to 42°.
Multiple adjustable parameters via on-board programming: Minimum Brake (0-30%), Drag Brake (0-30%), Minimum Drive (0-15%), Timing Level (0-42°), Timing Set Point (19,500-4,000), Dead Band (2-8%), Throttle Curve (Linear/Expo), Brake Curve (Linear/Expo), Brake Frequency (1.67-13.7 KHz), Brake End Point (10-100%), Drive Frequency (16-7 KHz), Reverse, Motor Rotation, Voltage Cut-Off, Hall Sensor Test
Approved for ROAR Sportsman Class Racing
On-board Hall Sensor Test to easily and quickly verify that the motor's sensors are working properly
NovaBrakes™ provide instantaneous braking under any timing condition
Sensor-based for excellent torque and low-speed driveability
User friendly One-Touch programming interface with five colored status LEDs to help personalize the speed control’s settings
Compatible with the entire 540 and 550-sized Novak brushless motor lines
Robust 3-amp BEC for strong and fast steering response under any condition
Highly water-resistant case
Cross-cut ESC heat sink for reduced weight and efficient cooling
Meets RoHS compliance and includes 120-Day Warranty
Designed, assembled and tested by Novak in Irvine, Calif., using globally sourced components
Motor
Sensor-based for excellent torque and low-speed driveability
Oversized front bearing [1/2” x 3/16” (12.7 x 4.8mm)] for increased load handling and bearing life
Rebuildable design with removable shielded sensor harness, rotor, sensor assembly, wound stator, bearing cap, hardware, sleeve and both end bells
Nickel-plated, 12.3mm sintered Neodymium rotor with a 0.125” pinion shaft that accepts all existing pinion gears
Meets RoHS compliance and includes 120-Day Warranty
Designed, hand wound and dyno tested by Novak in Irvine, Calif., using globally sourced components
Specification:
Motor
Watts: 280
kV: 5000 RPM/volt (unloaded)
Sensor Harness Length: 9" (230mm)
Motor Size: 2.07 x 1.41" (52.6 x 35.8mm)
Motor Weight: 6.6oz (187g)
Magnetic Material Operating Temp:* 392°F (200°C)
Motor is not capable of operating at 392°F (200°C). The recommended
operating temperature is 160°F (70°C)
ESC
Input Voltage: 2S Li-Po cells, 2S Li-Fe cells or 4-6 Ni-MH cells (1.2V/cell)
ESC Footprint: 1.16” x 1.47” (29.5 x 37.3 mm)
Weight (without wires): 1.29 oz. (36.6 g)
Design: Sensor-based
Motor Limit: All 3.5-turn (540-sized) and all 4.5-turn (550-sized) sensored brushless motors
On-Resistance (brushless): 0.00040 ohms @ 25°C trans. temp.
BEC: 6.0 volts DC / 3.0 amps
Status LEDs: 5
Power Wires: 14G Super-Flex Copper-Strand Silicone Wire
Include:
Havoc Pro SC ESC with cooling fan (1pc)
Novak 540 Ballistic Brushless Short Course 8.5 Turn Motor with Sensor Wire (1pc)
Instructions
|
rcMart.com © 2001 - 2013
Facebook
Twitter
Google+
Youtube
Blog