Phone Order Support: US +1(626)404-7382 | UK +44(020)8133-9382 | HK +(852)2858-6382

  1. Kyosho 1/12 PLAZMA Ra 2.0 2WD Racing Car Kit EP #30423
    [30423]

    Our Price:  Low Price: USD$229.90

    Stock: Out of Stock!

    Buy this item and earn 230 points valued at USD$0.92.

    Write a Review
    Quantity:
     

Kyosho 1/12 PLAZMA Ra 2.0 2WD Racing Car Kit EP #30423


Description:

A new racing scene has evolved in the four years since the launch of the PLASMA Ra in December 2011. Now is the time for a new machine that embodies the sum of all knowledge from constant racing competition. With the flexibility to adapt to different conditions, such as free movement of the center shock position to adjust from high-grip surfaces to slippery circuits, and the choice of crank or direct steering systems, this new machine incorporates the most advanced design features. The material and design of each carbon and red anodized aluminum component has been carefully formulated to achieve optimal strength and weight balance. The 2-stage finishing process of the red anodized aluminum parts creates a sense of pride in owning a machine with such an immaculate high-quality finish.


Kyosho 1/12 PLAZMA Ra 2.0 2WD Racing Car Kit EP #30423


Kyosho 1/12 PLAZMA Ra 2.0 2WD Racing Car Kit EP #30423


Kyosho 1/12 PLAZMA Ra 2.0 2WD Racing Car Kit EP #30423


Kyosho 1/12 PLAZMA Ra 2.0 2WD Racing Car Kit EP #30423


*Photos for reference only.


Feature:

  • Crank steering system delivers excellent left/right balance. Optional steering plate allows free Ackerman setting. Crank unit is supported by ball bearings on top and bottom and can be positioned in 3 different front-rear settings.
  • 1/12 electric racing car incorporates the world’s most advanced design technology.
  • Interchangeable front suspension (except knuckle) realizes maintenance efficiency.
  • Compatible with reliable JR and Futaba mini servos for 1/12 class. *Sanwa can be used with optional part.
  • Proven performance of coil springs installed on both front and rear sides. A variety of springs are available.
  • Includes largest international standard size wheels (largest in its class).
  • Uses metric (mm) size screws and nuts. *Only screws for rear wheel and clamp hub (L) are inch size.
  • Ball diff has plenty of capacity with large diameter diff ring. Standard spur gear for DD cars can be used.
  • Big roll shock features a revised roll piston and realizes larger tread area and increased effectiveness of grease through machine cut lateral grooves.
  • High durability 7075-grade motor mount changed from two lower fixing points to upper & lower fixing points as well as being thinned for lighter weight. Also, gap created between the screws of the motor mount and lower pad reduces strain under contact from hits.
  • Adjustment of spring tension can be made without removing parts through a hole in the lower pad that allows a 2.0mm hex wrench access to a 2mm hexagonal groove in the side spring holder.
  • Stabilizer control is delivered through a carbon plate connecting the left & right suspension blocks.
  • Urethane bumper included as standard. Body mount position moved 10mm towards the front to prevent body overhang.
  • Roll point between main chassis and lower pad moved 2mm rearward to deliver sharper turning performance.
  • Aluminum antenna holder secures antenna and center shock stay firmly. 6 center shock positions can be selected when used in combination with optional parts.
  • Five ride height adjusters included: 0mm; 1.5mm; 2.5mm; 2.75mm, and 3.0mm. Most frequently used settings from 2.5mm to 3.0mm can be adjusted at 0.25mm increments. Nylon material delivers superior impact resistance.
  • Large diameter wheels for the Ra 2.0 are the largest in its class. Made from soft nylon.
  • Excess has been symmetrically removed from the chassis resulting in 20g lighter weight for pure racing performance.
  • Front upper arm redesigned to a universal interchangeable shape for use on both front & rear, left & right sides, and with less play. Lower suspension arm redesigned for lighter weight and effective flex.
  • Full ball bearing specifications (total 11). Crank also features two ball bearings.
  • 92T spur gear included. Proven thrust bearing using 16 balls also included as standard.
  • Motor mount fixing changed to upper & lower securement with 0.25mm lower mount than the previous model. Made from high strength 7075-grade aluminum.
  • Chassis height can be adjusted with carbon spacer. Loosen the screw on bulkhead and push from behind to move forward for fast and easy chassis height adjustment. Carbon spacers of various thicknesses are available as options.

Specification:

  • Length: 281 mm
  • Width: (F/R) 164mm /166-170mm
  • Height: 47 mm
  • Weight: 730g approx. (JMRCA regulation)
  • Wheelbase: 200 mm
  • Tire(F/R): Φ41mm minimum / Φ41mm minimum
  • Motor: 540 class brushless motor (sold separately)

Include:

  • Unassembled chassis kit
  • Decals
  • Instruction manual

Require:

  • 2ch, 1 mini servo R/C system for cars
  • Brushless motor (540 class)
  • ESC (80A minimum recommended) for brushless motor
  • 1 cell (3.7V) Li-Po battery for 1/12 or 2 cell (7.4V) Li-Po battery for charger for chassis
  • Pinion gear (64 pitch 13-38T)
  • Tires
  • 1/12 Racing car body
  • Tools
  • Paint for body
  • Batteries for R/C system


    Customer Reviews

  1. There are currently no product reviews.

Write a Review

Customers who bought this product also purchased

Yeah Racing Alloy Bearing C-Hub With Knuckle Arm Set (BU) For Tamiya TA03 TA03-005BU
Yeah Racing Alloy Bearing C-Hub With Knuckle Arm Set (BU) For Tamiya TA03 TA03-005BU
USD$19.90USD$12.90
Kawada (SK18L) Bearing Cleanig Case (Large)
Kawada (SK18L) Bearing Cleanig Case (Large)
USD$11.10
Yeah Racing RC Ball Bearing (6x12x4mm) YB6016M/S10
Yeah Racing RC Ball Bearing (6x12x4mm) YB6016M/S10
USD$3.40
 
Tamiya (19334092) Wheel Set For JAS Motorsport Honda Civic Type-R R3 (24mm)
Tamiya (19334092) Wheel Set For JAS Motorsport Honda Civic Type-R R3 (24mm)
USD$5.10
Kawada (PNB-616) Super Duralumn Pinion Gear M=06 - 16T
Kawada (PNB-616) Super Duralumn Pinion Gear M=06 - 16T
USD$4.90
Tamiya G Parts For Jeep Wrangler CC-01 19005422
Tamiya G Parts For Jeep Wrangler CC-01 19005422
USD$8.90
 
Yeah Racing 3mm Ceramic Diff. Ball for Tamiya YBA-0002C
Yeah Racing 3mm Ceramic Diff. Ball for Tamiya YBA-0002C
USD$7.00
Tamiya (54185) Dual Block Tires K (Front 62/25)
Tamiya (54185) Dual Block Tires K (Front 62/25)
USD$7.60USD$6.80
Onisiki 6-Cell Sub-C Stick Pack NiMh 7.2V Battery 3500mAh / Tamiya Plug For RC Car ONI7301
Onisiki 6-Cell Sub-C Stick Pack NiMh 7.2V Battery 3500mAh / Tamiya Plug For RC Car ONI7301
USD$17.90USD$13.90
 
Manufacturers
Top Brands

rcmart traxxasrcmart rpm

rcmart 3racingrcmart Speed Passion

rcmart 3racingrcmart Speed Passion

rcmart Yeah Racingrcmart Pro-Line

rcmart Gmade Crawler GS01rcmart Xtra Speed

rcmart hobby wingrcmart skyrc

rcmart orcarcmart MST Drift Tire Wheel RC

rcmart GPMrcmart Xray

rcmart Team Associatedrcmart Holmes Hobbies

rcmart Tamiyarcmart ABC Hobby Body

rcmart TBR T-Bone Racingrcmart Jconcepts

rcMart summer-sale-2017

rcMart Flash-Sale-105th-170720-electronic









rcmart Reduced Shipping Save Big weekly deals
Subscribe
rcmart crawler Accessories
rcmart traxxas trx-4
rcmart Xpress Xpresso M1
rcmart 3racing D4 RWD hop up parts
rcmart Axial yeti hop up parts
rcmart Gmade GS01 hop up parts
rcmart Axial SCX10II hop up parts
rcmart Axial SCX10 hop up parts
rcmart traxxas e-revo
rcmart traxxas summit
rcmart xray t4
rcmart blog RC NEWS
rcmart Exclusive Special Offer GPM Racing 400 days Warranty
Share Product
Share on Facebook Share on Twitter Share on Digg Share via E-Mail
tick
2 items are added to shooping cart
Order Qunatity:
Order Total: USD$