Hobbywing Xerun Sensored Brushless System 150A 4274 2200Kv w/ Program box Combo for 1:8 RC Car #Combo-M6B
Our Price: Price: USD$149.90
You Save: $29.00 (16%)
Stock: Out of Stock!
Buy this item and earn 150 points valued at USD$0.60.
Hobbywing Xerun Sensored 150A ESC + 4274 BL Sensored Motor (2200KV) + 3 In 1 Professional Multifuction LCD Program Box Combo Set for 1:8 RC Car Buggy
This is the Hobbywing Xerun Sensored 150A ESC + 4274 BL Sensored Motor (2200KV) + 3 In 1 Professional Multifuction LCD Program Box Combo Set for 1:8 Car
Designed for 1/8 Car
Compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LRP and Feigao, etc.
Excellent start-up, acceleration and linearity features.
3 running modes (Forward only with brake, Forward/Reverse with brake, Forward/Reverse immediately)
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
8 steps of timing adjustment by software.
Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
Easily program with only one button and compatible with pocket-sized Program box.
Firmware can be updated through an USB adapter (Optional equipment).
Splash proof and dustproof.
Stable and reliable.
- Output: Continuous current 150A, burst current 950A.
- Input: 6-18 cells NiMH/NiCd or 2-6 cells LiPo.
- BEC Output: 5.75V/3A (Switch mode built-in BEC).
- Resistance: 0.0002 Ohm.
- Motor Supported: Sensorless and sensored brushless motors
- Suitable Brushless Motor:
The above T number is the value of a 4274 sized motor (Diameter=42mm, Length=74mm)
- Suitable Car: 1/8 Buggy / Truggy / Monster.
- Size: 58mm(L) * 46.5mm(W) * 35mm(H).
- Weight: 105g(Without wires)
- Shaft: 5mm
- Shaft Length: 18.5mm
- Weight: 371g
3 In 1 Professional Multifuction LCD Program Box
- Size: 91mm (L) * 54mm (W) * 18mm (H)
- Weight: 65g
- Input Voltage: 4.8-6V (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program box)
- Displayer: 16*2 characters LCD.
- Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)
- Hobbywing Xerun Sensored 150A ESC with cooling fan(1pc)
- 4274 BL Sensored Motor with sensor wire
- Mod 1 5mm Pinion gear 13T(1pc)
- Mod 1 5mm Pinion gear 19T(1pc)
- 3 In 1 Professional Multifuction LCD Program Box with USB adapter (1pc)
- Instruction manual