Hobbywing XERUN 120A V2.1 Sensored Brushless ESC Blue w/ Yeah Racing Hackmoto XTA 10.5T Combo Set #CB0884 (Discontinued)
Our Price: Low Price: USD$157.80
Stock: Out of Stock!
Buy this item and earn 158 points valued at USD$0.63.
Hobbywing XERUN 120A V2.1 Sensored Brushless ESC Blue w/ Yeah Racing Hackmoto XTA 10.5T Combo Set #CB0884
- Hobbywing XERUN 120A SD Brushless ESC For 1/10 or 1/12 RC Car #120A-SD V2.1BU
- Yeah Racing Hackmoto XTA 10.5T 540 4450KV Brushless Sensored Motor #XTA-T105
Hobbywing XERUN 120A Brushless ESC (V2.1-BU) For 1/10 or 1/12 Car (BU)
This is the New Hobbywing XERUN 120A Brushless ESC (V2.1) For 1/10 or 1/12 Car.
- Current endurance capability increases 15% compared with V2.0
- Perfect filtering effect from smaller size capacitors module
- The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).(NEW)
- Supports sensored and sensorless brushless motors, and seamlessly changes to sensorless working mode when the sensor cable is broken.
- Use top quality electronic components such as IRTM (USA) super MOSFET and RubyconTM (Japan)lowest resistance capacitor etc. to enhance the current endurance ability of the ESC.
- Supports 2-3 cells Lipo or 4-9 cells NiMH/NiCd battery pack.
- Excellent start-up, acceleration and linearity features.
- 3 running modes (Racing mode, Reverse mode and Rock crawler mode
- 4 steps of maximum reverse force adjustment.
- Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
- 9 start modes (Also called “Punch”) from “Very soft (Level 1)” to “Very aggressive (Level 9)”.
- Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection /Throttle signal loss protection / Motor blocked protection.
- 8 steps of timing adjustment, and you can use this programmable parameter to adjust the timing value even for sensored brushless motor, while for ESC from other manufacturers, you must turn the rear cover of the motor to change the timing value.
- Easily program with only one button and compatible with pocket-sized program card.
- Firmware can be online updated through an USB adapter on the advanced LCD program box.
For: 1/10 , 1/12 On-road car & Off-road ,1/8, 1/10 Scale Rock Crawler
Operated with: Brushless ESC
Cont. Current: 120A
Burst Current: 960A
Resistance: 0.0003 ohm
Suitable Car: 1/10 , 1/12On-road car & Off-road ,1/8,1/10 Scale rock Crawler
Suitable Brushless Motor With 2 cells Lipo or 4-6 cells NiMH: ≧3.5T (on-road), ≧5.5T(off-road)
Suitable Brushless Motor With 3 cells Lipo or 7-9 cells NiMH: ≧5.5T (on-road), ≧8.5T(off-road)
Battery: 4-9 Cell Ni-xx (NiMh or NiCd) or 2-3 Cell Li-Po
BEC Output: 5.75@3A
Dimension: 43(mm)(L) x 36(mm) (W)x 33(mm)(H)
EZrun-120A-SL ESC (Version 2.1) (1 Pc)
Cable Tide (4 Pcs)
Hobby Wing Decal (1 Pc)
Yeah Racing Tornado High Speed Fan 25x25mm for ESC (#YA-0201)
This Yeah Racing Tornado Fan has Ultra High Speed. This dual ball bearing fan flows up to 100% more air than other similar Fan!
Yeah Racing Hackmoto XTA 10.5T 540 4450KV Brushless Sensored Motor #XTA-T105
Hackmoto XTA motor is the second Gen Hackmoto Motors with lots of improvements in terms of design, engineering and material and is exquisitely crafted to achieve high performance in demanding environments. The result speaks for itself and was very competitive to even the most high-end motors in the market with its low friction, low heat, low power consumption, low wearing with high power output characteristic.
The new Motor is equipped with the Xtreme Timing Advancement System (XTA™ ) for precise timing and turbo timing as well as physical timing set ups when used with Hacktronic ESC.
- For: 1/10 RC Car
- Material: Aluminum
- Color: Gunmetal
- XTA™ Timing (-3 to +3 Step-less adjustment)
- Premium Quality Ball Bearing Minimum Friction
- High Purity Copper Winding
- Removable/Replaceable Rotor
- High Power Neodymium Magnet
- Premium Quality Material for Minimum Heat and Energy Loss
- Sensor-based for Excellent Torque and Low-Speed Smoothness
- Sensor-based for Precise Timing and Turbo Timing function for exceptional Acceleration and Top Speed. (With Hacktronic ESC)
- Aluminum Endbells For Light Weight and better heat dissipation
- Venting Holes Engineered Carefully For Efficient Air Flow and Cooling
- Turns: 10.5T
- Watts: 245
- KV: 4450
- LiPo: 1-2S Lipo
- Weight: 160g
- Hackmoto XTA Motor (1 pc)
- Sensor Cable (1 pc)