HobbyWing QuicRun 1/10 Brushless Sensored System 60A ESC w/ 3650SD 25.5T 1520KV Motor & YR YA-0525BK Combo #CB1062
- HobbyWing QuicRun 1/10 Brushless Sensored 60A ESC 10BL60
- Hobbywing 1/10 QUICRUN 3650SD 25.5T 1520KV Brushless Sensored 540 Motor #QUICRUN-3650SD-25.5T-BLACK-G2
- Yeah Racing Aluminum 7075 Fan Mount w/ 30mm Tornado Fan for 540 Motor Black #YA-0525BK
HobbyWing QuicRun 1/10 Brushless Sensored 60A ESC 10BL60
- For: 1/10 & 1/12 On-road / Off-road / F1 / Drift car race / Street race for fun / Club racing / STOCK race with 0 timing / Drift car race
- High performance but low price, users can own this reliable race-ready ESC at an affordable cost.
- Compact size, suitable for various car chassis.
- Auto identification system can recognize sensored / sensorless brushless motors automatically.
- Excellent operating feelings and plentiful adjustment options, suitable for most kinds of competitions.
- 8 steps of timing adjustment greatly increase the output power of the motor, and unlock its maximum potential.
- Proportional brake with 4 steps of Maximum Brake Force adjustment, 8 steps of Drag Brake Force adjustment and 4 steps of Initial Brake Force adjustment.
- 9 steps of acceleration (punch) adjustment, from “soft” to “very aggressive” to fit for different kinds of cars, tires and tracks.
- Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection / Motor Lock-up protection.
- One-button (the “SET” button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings.
- Compatible with the optional device ---- the portable Digital LED Program Card, especially convenient for outdoor use.
- Model: QUICRUN-10BL60-SENSORED
- Cont./Peak Current/ Resistance: 60A / 380A / 0.0008 Ohm
- Motor Type Supported: Sensored / Sensorless Brushless Motor
- Car Applicable: 1/10 & 1/12 On-road / Off-road / F1 / Drift car race / Street race for fun / Club racing / STOCK race with 0 timing / Drift car race
- Motor Limit:
- For 4-6 cells NiMH/2S Lipo
- ≥8.5T(1/10 On-road), ≥13.5T(1/10 Off-road) *"T" indicates the limit value of motor turns when the ESC timing is set to 0. The larger the timing, the more turns the motor needs.
- 8-9 cells NiMH/3S Lipo
- ≥13.5T(1/10 On-road), ≥17.5T(1/10 Off-road) *"T" indicates the limit value of motor turns when the ESC timing is set to 0. The larger the timing, the more turns the motor needs.
- Battery: 4-9 Cells NiMH / 2-3S Lipo
- BEC Output / Operating Voltage of the Cooling Fan: [email protected], Linear Mode / 6V (The cooling fan gets its power supply from the built-in BEC)
- Dimension / Weight: 33mm(L)*28mm(W)*31.5mm(H, with cooling fan) / 59g (with wires, without cooling Fan)
- HobbyWing QuicRun 1/10 Brushless Sensored 60A ESC (1 Set)
- Manual (1 pc)
Hobbywing 1/10 QUICRUN 3650SD 25.5T 1520KV Brushless Sensored 540 Motor #QUICRUN-3650SD-25.5T-BLACK-G2
This is Hobbywing 1/10 QUICRUN-3650SD-25.5T 1520KV Brushless Sensored 540 Motor.
- For: 1/10 ,1/12 On-Road Touring/Drift car/F1/M car, 1/10 Off-Road Buggy/2WD SCT/Truggy, STOCK/SPORT Race, Rock Crawler
- - Built-in Hall sensor brings drivers the amazing sense of control.
- - Top-quality components: heat-resistant magnet, heat-resistant wires and name-brand bearings.
- - Dustproof design at the location where motor leads exit.
- - Creative design, the gold-plated lockable connector, which can be fastened by screws, utterly eliminated all the potentialities that connectors may loose.
- - Detachable structure, easy for clean and maintenance, greatly prolongs the service life of the motor
- Model: QUICRUN-3650-25.5T
- LiPo Cells: 2~3S
- Outer Diameter/Length: 36mm / 52.8mm
- R.: 0.1
- No-load Current: 1.1
- Diameter of the Shaft: 3.17 mm
- Poles: 2
- Hobbywing 1/10 QUICRUN-3650SD-25.5T 1520KV Brushless Sensored 540 Motor (1 pc)
Yeah Racing Aluminum 7075 Fan Mount w/ 30mm Tornado Fan for 540 Motor Black #YA-0525BK
Fan mount for keeping your motor cool! Features a wire hiding clamp, where you can neatly tuck your fan wire underneath and can prevent it from catching onto moving parts! Able to fit either 30 or 40mm fans! A setscrew at the top allows you to tighten the clamp which prevents it from moving when you have set it at your desired angle. Packaged with a 30mm fan!
*Photos for reference only.
For: 540 Motors
Material: 7075 Aluminum
Aluminum 7075 Fan Mount (1 Pc)
Tornado 30mm Fan (1 pc)