Hobbywing EZRUN MAX8 V3 T-PLUG 150A Waterproof Brushless ESC Black For 1/8 RC Car #HW460-150A
The Ezrun MAx8 is a 6S LiPo-compatible and 150A rated ESC. Usable with either sensored and sensorless motors and it also offers a selectable 6V or 7.2V high-output BEC system to accommodate the servo which you are using in your rig. Thanks to its dust and water protection, the controller will withstand nearly every racing and bashing condition. The controller comes pre-soldered with T-plug and its case incorporates 6.5mm gold-plated bullet-type connector tubes for a low resistance connection to your motor.
- For: 1/8th Touring Car, Buggy, Truggy and Monster Truck
- Water-proof and dust-proof. The ESC can work on the tracks with small amount of water.
- Plenty of programmable items, suitable for all sorts of vehicles.
- Multiple protection features: Low voltage cut-off protection / Over-heat protection
- Can be set in either Forward/brake or Forward/Reverse/Brake mode
- Output: Continuous 150A, burst 950A.
- Motor Type: Sensorless/Sensored Brushless Motor (only in sensorless mode)
- Motor Limit with 4S LiPo/12 cells NiMH : KV≤3000 (4274 size motor)
- Motor Limit with 6S LiPo/18 cells NiMH ：KV≤2400 (4274 size motor)
- LiPo / NiMH Cells: 3-6S LiPo / 9-18S NiMH
- BEC Output: 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC)
- Cooling Fan: Powered by the stable BEC voltage of 6V/7.2V
- Size / Weight:59.8mm(L)*48mm(W)*36.8mm(H)/173.5g
- Programming Port: FAN/PRG Port
- Hobbywing EZRUN MAX8-V3-T PLUG (1 pc)
- LED program box (1 pc)
- Manual (1 pc)