Hobbywing EZrun Brushless Sensorless 18A-SL-H (Version 2.0 USB Supported) +12T Motor (KV 7800)+Programcard Combo Set
This Hobbywing Ezrun combo set (Combo-A1) is same as the Hobbywing Ezrun combo (Combo 15-car) plus new features, please scroll down the description for full details
This is the EZrun Brushless Sensorless 18A-SL-H (Version 2.0 USB Supported) +12T Motor (KV 7800)+Programcard Combo Set for RC cars and trucks.
For: 1:18 RC
Operated with: Brushless ESC
Size: Similar to Brush Motor 130
Diameter: 30 x 20.5 x 20.5 mm
Fixed Motor Screw Hole: Hole A Length: 16mm, Hole B Length: 14mm,
Hole C Length: 12.5mm
Rotor for Gear: 1.98 mm
Turns: 12 T
The EZrun series brushless controls (Version 2.0) include ESC of 18A, 25A and 35A for RC cars and trucks.
The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).(NEW)
With 3 running modes: Racing mode (Forward), Forward/Backward mode and NEW Rock Crawler mode.
Especially designed for RC car, with excellent start-up, acceleration and linearity features
Compatible with sensorless brushless motor
Use top quality of electronic components to enhance the current endurance and capacity of the ESC.
4 steps of maximum reverse force adjustment
Proportional ABS brake function with 4 steps of 4th – 11th maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called “Punch”) from “soft” to “very aggressive”.
Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
8 steps of timing adjustment.
Waterproof and dustproof.
Easily program with only one button and compatible with pocket-sized program card.
Dustproof design for the motor.
Motor uses top quality materials:
---Aluminium shell (case)
---High quality magnets
---Copper wires of high temperature endurance
---Good quality bearings.
Cont. Current: 18A
Burst Current: 50A
Resistance: 0.01 ohm
Suitable Car: 1/18, 1/16 car
Suitable Brushless Motor: > 12T (2030 brushless motor)
Battery: 4-9 Cell Ni-xx (NiMh or NiCd) or 2-3 Cell Li-Po
BEC Output: 6V/1A
Motor Type: Sensorless Brushless Motor
Dimension: 31.5 x 27.5 x 15 (mm)
Weight: 19g (Without wires)
EZrun-18A-SL-H (Version 2.0) (1 Pc)
12T Senserless Brushless Motor (1 Pc)
Program card (1 Pc)
Cable Tide (2 Pcs)
Shrink Tube (3 Pcs)
Hobby Wing Decal (1 Pc)