MST FXX-D S II FRM 2WD RWD Shaft Driven 1/10 RC Drift Chassis Kit 532123 w/ OMG Low Profile Digital Coreless Servo CM07S #CB0828
- MST FXX-D S II FRM 2WD RWD Shaft Driven 1/10 RC Drift Chassis Kit #532123
- OMG Low Profile Digital High Speed Coreless Servo 7KG 0.08 Sec For RC Drift Car #D2-LP-CM07S
MST FXX-D S II FRM 2WD RWD Shaft Driven 1/10 RC Drift Chassis Kit #532123
FXX-D S II is a completed high performance 2WD drift car. It is the first priority for the new entrants into the 2WD drift area.
*Photos for reference only.
- 2WD Electric drift car chassis
- Configured as real, the motor is set at the center of azle and drive the rear wheel by the drive shaft directly, and it leads the drift closing to real
- The motor, battery, drive shaft and rear drive gear box are set in straight, to centralize the center of gravity and improve the balance in drifting
- The design of great front steering angle for the rear drift is able to allow entry players to easily get started and manipulation.
- The rear differential and drive system help to stabilize the drift dynamics at curves.
- The damper shaft is treated by special chemical nickel process. It has the features of high smooth, high wear resistance and high corrosion resistance
- The innovative special material motor mount of excellent strength and heat sink performance, the heat sink performance is 92% of aluminum's.
- Standard realistic lined brake disc and caliper. The manifests enlarged disc reinforces the visual effects for wheel and disc collocation.
- Wheelbase: STANDARD 257mm (adjustable)
- Width: STANDARD 190mm (adjustable)
- GEAR RATIO: 2.12 (36T/17T)
- CASTER: 8 degrees variableness
- MST FXX-D S II 2WD Drift Chassis Kit (1 set)
- Wheel (4 pcs)
- Tires (4 pcs)
- Sticker (1 pc)
- Manual (1 pc)
- Pinion Gear
OMG Low Profile Digital High Speed Coreless Servo 7KG 0.08 Sec For RC Drift Car #D2-LP-CM07S
The LDT045070C servo is a powerful, accurate high speed and high precision digital servo with its waterproof case, long wear titanium gears and copper gears, a precision coreless motor and improved electronics, legendary quality.
It can be capable of 4.8 to 6.0 volt operation
The LDT045070C takes a whole new galaxy of performance.
RC OMG provides legendary digital precision with higher torque and faster speed servos.
When Buy at rcMart, This coreliess servo is warranted for oneyears from the date of purchase to be free from manufacturing or component defects. During the warranty period RC OMG will repair or replace (at our discretion) any defective products. Please keep your original order receipt as proof of the date of purchase.
This warranty does not cover abuse, neglect, or damage due to incorrect wiring, over voltage, overloading, misuse, crash damage, improper installation or damages caused by alteration by unauthorized persons.
- For: 1/10 Drift, On Road RC
- Material: Plastic
- Premium Value at lower price point
- Long wears titanium gear and copper gears
- Digital precision provides great accuracy and performance
- Ball bearing-supported output 25T shaft
- Compatible with all types of Radio system
- Type: Digital
- Operating Voltage Range: 4.8 -6.0Volts DC
- Bearing Type:Dual Ball Bearings
- Speed (s/60░@4.8V/6.0V): 0.10/ 0.08
- Torque oz./in. (4.8V/6.0V): 76/97
- Torque kg./cm. (4.8V/6.0V): 5.5/7
- Size: 40.9mm x 20mm x 25.2mm
- Weight : 45g
- Motor Type: Coreless
- Control Systemt: +Pulse Width Control 1500Ásec Neutral
- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Temperature Range(℃): -10░ - 50░
- Idle Current (4.8V/6.0V): 4mA/5mA
- No Load Running Current (4.8V/6.0V): 300mA/400mA
- Stall Current (4.8V/6.0V): 2500m/2800mA
- Dead Band Width: 2Ás
- Potentiometer Type: Rotating(Max.220░)
- Connector Wire Length: 11.8 in. / 300 mm.
- Connector Wire Gauge: 25 AWG
- Connector Type: JR
- Gear Type: Titanium Gears + Copper Gears
- Frequency: 330Hz
- Shaft: 6mm 25T
- Low Profile Digital High Speed Coreless Servo (1 pc)