Futaba High Torque Digital Servo for 1:8 / 1:10 RC Touring Car/Boat #S9451
Our Price: Price: USD$79.90
You Save: $4.00 (5%)
Buy this item and earn 80 points valued at USD$0.32.
|Over voltage or reverse polarity. Maybe user problem.
Dust and Water Resistance Servo
Operating Speed: 0.10sec／60°（6.0V)
Output torque 8.7kg・cm
Futaba Digital servo is specially designed for HIGH-TORQUE or HIGH-SPEED, therefore very high CURRENT drain is normal at startup. For ultimate performance when using this servo please review the following points.
(1) When using a NICAD BATTERY the following will occur. (If using DRY-CELLS there will be less performance.)
(2) When using systems with the BATTERY FAIL SAFE function it has a higher CUT-OFF VOLTAGE SETTING which will cause shorter operation time.
(3) When installing the servo please check PUSHROD LINKAGE to make sure there is no binding in order to prevent excessive power consumption and decrease the life of the motor and battery.
This digital servo cannot be used with following transmitters (servo neutral signal: 1310us)
Use the horn set screw supplied with the servo. (Screw size: 3 x 8mm)
The servo horn can be used the only 3mm in diameter of the hole center.
For full performance of digital servos, please use them only with FM and PCM system. Do not use digital servos with AM systems.
Do not turn the servo horn forcibly in the power off state. The interior maybe damaged.
CONQUEST AM, FG series (T4FG, T5FGK, T6FG, T6FGK, T7FGK), New Terratop, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.
Need a plastic Case for it???