FEETECH Programmable Digital Metal Gear HV Servo (Super Torque) with Heat Sink for RC Car / Boat #Fi7621M
[Fi7621M]

FEETECH Programmable Digital Metal Gear HV Servo (Super Torque) with Heat Sink for RC Car / Boat #Fi7621M

Description:

Feature:

• For: RC Airplane/Car/Boat/Robot
• Standard digital Titanium gears servo、2BB
• Coreless motor、Aluminium middle hull
• Waterproof
• Operating Voltage: 2-cell Li-Po power
• Dead band width: 2usc
• Interface: (like JR)
• Wire length: 30cm
• FAIL SAFE, On or Off
• Direction of Rotation
• Travel Speed
• Servo Max Torque limit, and Punch
• Center, End, and FAIL SAFE Point
• Signal Pulse Set-Up
• Stretch (Holding Power, Running Power, Acceleration and Deceleration)
• Dead Band Width
• Resolution Setup
• “Save and Open” File Options
• Reset Factory Default Data
• Read and Write Servo Data

Specification:

• Model: Fi7621M: FEETECH Programmable Digital Metal Gear HV Servo #Fi7621M
• Speed: 0.16sec/60° (7.4V) / 0.14sec/60° (8.4V)
• Torque: 17.8kg.cm/247.2 oz.in (7.4V) / 21.0kg.cm/291.7 oz.in (8.4V)
• Weight: 56g(1.41oz)
• Power Supply: 7.4V / 8.4V
• Size: 40.2*20.0*38.6mm

Include:

• Servo (1 pc)
• Servo Arm(1 Bag)

Optional items:

Click the links below to buy these optional items:

• FEETECH Programm Connector For FT Programmable Servo #FE-SCPC-1 (Only Test Mode)
• FEETECH Direct Power Supply Connector with BEC #FE-DPC-1

Manual (Programm Connector For FT Programmable Servo):

• FEETECH Programm Connector For FT Programmable Servo #FE-SCPC-1 (Only Test Mode)

Manual (Direct Power Supply Connector with BEC):

• FEETECH Direct Power Supply Connector with BEC #FE-DPC-1



The HV Servo Direct Power supply Connector schematic diagram



Wiring Method