Yeah Racing Hackmoto XTA 13.5T Brushless Sensored Motor w/ Speed Passion Reventon Pro 1.1 Laser Blue 140A ESC Combo Set #CB0756
- Speed Passion Reventon Pro 1.1 Brushless ESC with Fan for 1/10 On Off Road Laser Blue #SP000740
- Yeah Racing Hackmoto XTA 13.5T 540 Brushless Sensored Motor #XTA-T135
Speed Passion Reventon Pro 1.1 Brushless ESC with Fan for 1/10 On Off Road Laser Blue #SP000740
High power systems for RC models can be very dangerous. Users should read this manual carefully. Speed Passion has no control over the correct use, installation, application, or maintenance of our products. No liability shall be assumed not accepted for any damages, losses or costs resulting from the use of the product. Any claims arising from the failure of the ESC, malfunctioning etc. will be denied. Speed Passion assumes no liability for personal injury or consequential damages resulting from our products or our workmanship. As far as is legally permitted, the obligation to compensation is limited to the invoiced amount of the affected product.
- For: 1:10 Scale On Road / Off Road RC Car.
- Color: Laser Blue
- Compatible with all sensored and sensorless brushless motors.
- Built in ESC enhancement feature will allow users to update to the latest DRRS Version 3.0 software and any future software developments.
- New "Reventon - Dynamic Sensor Technology Series" feature. State of the art, new development in software will give users maximum efficiency along with a wide power band for consistent performance and maximum power output!
- Proportional ABS brake function with 11 steps of brake adjustment. 9 steps of Auto drag-brake adjustment.
- New Digital Racing Response modes Version 3.0 (From Level 1 - Smooth to Level 9 - Aggressive) "Digital Racing Response System – DRRS3.0" (note 1). Fully upgradeable for different modes and levels of tuning.
- Multiple safety protection features: Low voltage cut-off protection for lithium batteries / Over-heat protection / Throttle signal loss protection.
- New "Dynamic Multi Timing System - DMTS" To maximize motor and ESC performance, the Reventon ESC has a special 8 mode adjustment system designed for any brand of brushless motor.
- 4 running modes (Forward with brake "No Reverse", Forward with reverse after “FULL Stop”, Forward with reverse and Forward/reverse with brake) (note 2) .
- Four buttons for easy programming. Compatible with pocket-sized USB SMART ESC program unit.
- Continuous/Burst Current: 140A / 960A
- Resistance: 0.0003 ohm
- Brushless Motor Limit: Max ≧ 3.5T (note 3)
- Battery(note 5): 4-8 Cell Ni-xx (NiMh or NiCd) or 2 Cell Li-Po / 2 Cell Li-Fe
- For 4-6 Cell Ni-xx or 2s Lipo: Use the standard fan supplied with the ESC;
- For 7-8 Cell Ni-xx: The included ESC fan is not compatible with high voltage. ESC fan must be replaced with a high voltage fan or connect the fan to the receiver port (+6V). (note 4)
- BEC Output: 6.0V / BEC 3A
- ESC Type: Sensored /Sensorless
- Motor Type: Sensorless or Sensored brushless motor
- Dimension: 40mm (L) x 35mm (W) x 20mm ( H)
- Weight: 40g (Without cooling fan and wires)
- ESC Fan: 30mm
- Supports Smart LCD program card for program setting: Yes
- Supports 2.4G handset for program setting: Yes (optional 2.4G handset programmer sold separately)
- Supports Bluetooth module setting (note 6) : Yes (optional Bluetooth module sold separately)
- Supports Wi-Fi Module software setting (note 7): Yes (optional Wi-Fi module sold separately)
- Battery voltage display (note 8,10): Yes
- Temperature display (note 9,10): Yes
- Racing Profile setting: Yes
- Note 1: For Reventon Pro 1.1 version, New Digital Racing Respond System (From Level 1 - smooth to Level 9 - aggressive) "Digital Racing Response System – DRRS3.0".
- Note 2: Running mode item settings will vary according to different racing profiles. (Refer to manual page 3 Table 1)
- Note 3: The brushless motor limit is tested under the following conditions:
- a) The input is a 2 cell Li-Po battery;
- b) The ESC is equipped with a fan.
- Note 4: The voltage of fan socket on the ESC is not equal to the voltage of the battery. It is supplied by a regulator, and the socket is output +6V.
- Note 5: For brushless motors, the ESC supports up to 8 cell NiMh/NiCd (or 2 cells Li-Po) input.
- Note 6: For Reventon Pro 1.1 version, the ESC supports the Bluetooth module. The user can modify the ESC settings by using an Android phone / Tablet, "Android OS2.2"★. Furthermore, users can download the latest firmware and updates for the ESC using the module.
- Note 7: For Reventon Pro 1.1 version, the ESC supports the Wi-Fi module. The user can modify the ESC settings by using an iPhone / iPad / iPod touch, "iOS 4.1"★. Furthermore, users can download the latest firmware and updates for the ESC using the module.
- Note 8: The display of battery voltage is for reference only.
- Note 9: The display of temperature is for reference only.
- Note 10: LCD program card, Bluetooth module, or Wi-Fi module are required to display the temperature and the battery voltage of the ESC
- Speed Passion Reventon Pro 1.1 Brushless ESC (1 pc)
- Low-Profile 30mm High Speed Fan (1 pc)
- Smart LCD Program Card (1 pc)
- Wire (1 Set)
- Manual (1 pc)
Yeah Racing Hackmoto XTA 13.5T 540 Brushless Sensored Motor #XTA-T135
Hackmoto XTA motor is the second Gen Hackmoto Motors with lots of improvements in terms of design, engineering and material and is exquisitely crafted to achieve high performance in demanding environments. The result speaks for itself and was very competitive to even the most high-end motors in the market with its low friction, low heat, low power consumption, low wearing with high power output characteristic.
The new Motor is equipped with the Xtreme Timing Advancement System (XTA™ ) for precise timing and turbo timing as well as physical timing set ups when used with Hacktronic ESC.
- For: 1/10 RC Car
- Material: Aluminum
- Color: Gunmetal
- XTA™ Timing (-3 to +3 Step-less adjustment)
- Premium Quality Ball Bearing Minimum Friction
- High Purity Copper Winding
- Removable/Replaceable Rotor
- High Power Neodymium Magnet
- Premium Quality Material for Minimum Heat and Energy Loss
- Sensor-based for Excellent Torque and Low-Speed Smoothness
- Sensor-based for Precise Timing and Turbo Timing function for exceptional Acceleration and Top Speed. (With Hacktronic ESC)
- Aluminum Endbells For Light Weight and better heat dissipation
- Venting Holes Engineered Carefully For Efficient Air Flow and Cooling
- Turns: 13.5T
- LiPo: 1-2S Lipo
- Weight: 160g
- Hackmoto XTA Motor (1 pc)
- Sensor Cable (1 pc)